Question about 2006 Dodge Durango

Open Question

2011 dodge durango neutral button is stuck down. tried getting gunk out not working

Transfer case stuck in neutral due to neutral button being stuck down.

Posted by on

  • lauranjosh
    lauranjosh Jan 17, 2013

    Its stuck in neutral so it will not move anywhere

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
co7196
  • 3433 Answers

SOURCE: 2006 Dodge Durango stuck in neutral

front pump failure or valve body internal leakage. Trans pn needs to be lowerred to ck and at a shop. Sorry

Posted on Aug 02, 2009

Ad
c17hydro
  • 2984 Answers

SOURCE: where is the transfer case

Look on the back end of your transmission.....it should look similar to this:


c17hydro_69.gif

Posted on Dec 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 dodge durango 4x4 im having an issue with a grinding noise comming from the front of the vehical,im not sure if its the front diff. or half shaft or the transmission


SOUNDS LIKE A TRANSFER CASE ISSUE. DODGE HAS USED A FEW DIFFERENT TRANSFER CASES NVGS TO THE BW'S BUT HAVE HAD THE SAME PROBS, JUNK, THE NOISE THE JUMPING WHICH WE CALL BINDING IS ALL COMMON ISSUES. IT CAN BE A ADJUSTMENT ISSUE SO CHECK THAT FIRST BUT INTERNAL ISSUES ARE COMMON AS WELL.HOPE THAT HELPS

Feb 22, 2013 | 1999 Dodge Durango

1 Answer

My 01 durango is stuck in 4 wheel drive


Is that the push button type or does it have a stick? Try putting the truck in neutral before taking it out. Work it through the gears while trying to take it out. If it push button type, maybe the relay isn't working right or have a blown fuse?

Feb 11, 2013 | 2000 Dodge Durango

1 Answer

2011 jeep liberty stuck in neutral


Rock back and forth , take it out of AWD , Put parking brake on shift into Park .

Jan 23, 2013 | 2011 Jeep Liberty

1 Answer

I have a 2001 Dodge Durango that is ana automatic and it is stuck in 4-low. We have tried putting it in nuetral and backing up that doesnt work. When we flip the switch to put in 2 wheel the light blinks...


That truck has an electric motor that controls the transfer case,
It's a couple hundred dollar part tho. See if you can hear it run
when you shift it in. It's right on the transfer case.
Could even take it off and turn the shaft by
hand to get the range you want.May not be the transfer case
itself.

Dec 22, 2012 | 2001 Dodge Durango

1 Answer

How do you put a 2001 dodge durango in neutral to dolly tow it. I know to put the transfer case in neutral but can't seem to shift the transfer case into neutral, 4h and 4L and awd shift


If your going to put the front wheels on a dolly then it won't matter whether or not the front end is in neutral,if the rear is going to be lifted then it is a good idea to remove the drive shaft,this will keep the transmission from turning.

Apr 05, 2010 | 2001 Dodge Durango

3 Answers

How do you use 4WD on a 1999 dodge durango?


there are 2 systems.
one is a part time system only.the 4x4 locks and is for ice mud and snow.Driving full time will damage the transfer case.The other system is a full time system and the selector says 2wd,4wd part time ,4wd full time and 4 lo. if in full time,it can be driven all the time even on dry roads.The full time is really an all wheel drive system.
the 4low is a very low gear and the main shifter has to be put in neutral and then the transfer case put in 4 low.attempting to put it in 4 low while in "drive" will make a gear grinding noise.
getting out of 4 low is the opposite.shifter to neutral and then put it in 2wd and then in drive.The newer durango has an electronic transfer case with a dial on the dash.The 2002 was available with 2wd,4wd,awd and 4 lo on a switch.The 1999 has the lever on the floor .

Feb 12, 2010 | 1999 Dodge Durango

1 Answer

05 Durango transfer case will not engage, stuck in neutral. How or what is causing the problem, how can I fix it?


I had this happen to me today and found that it was a simple linkage problem.

If the 4WD-Neutral-2WD stick on the floor console moves freely try crawling under the vehical and make sure that the shift linkage is attached to the transmission. On mine I found a cotter pin had broken and the shift lever was not staying connected.

Make sure the shifter on the steering colum is in neutral and engine off when making these repairs.

Good luck

Apr 04, 2009 | 2005 Dodge Durango

2 Answers

2001 Dodge Durango stuck in 4 wheel-Low. Won't switch back to 2WD


Just to clarify, the "transmission" is not stuck in 4-Lo. It is the "transfer case" that is attached to the transmission that actually engages the 4-Hi and 4-Lo modes. To properly shift your vehicle into 4-Lo, you know that you have to shift the transmission into neutral and slow down to less than 5 mph. Once your vehicle slows down to this range, your can switch your transfer case into 4-Lo mode. Due to the inner workings of the transfer case, the actual shift into 4-Lo may take a few seconds to complete. This is normal and does not signify that there is an issue. All transfer cases that have 4-Lo mode will act this way regardless of the make or model. To make a long story short, to shift out of 4-Lo you must follow the same steps that you took to shift into 4-Lo, just in reverse order. Switch the transfer case to 4-Lo mode if it isn't already there. Slow down to less than 5 mph (your vehicle must be moving, though). Then, shift your car into 4-Hi or 2WD. Give your vehicle several seconds to complete the shift. The transfer case indicator light will flash until it is complete. When it does complete the shift into the new gear mode, you will most likely hear a "clunk" (the range sleeve inside the transfer case disengages from its mating spline) from under your car. Again, any transfer case with 4-Lo (regardless of make or model) will exhibit this same noise. This should help you get out of 4-Lo. It is good practice to shift your car into and out of 4-Lo at least a few times each year to keep all of the splines free of corrosion and build-up. Based on the age of your vehicle, your transfer case may also need a complete flush and some new transmission fluid. Hope this helps.

Feb 22, 2009 | 2001 Dodge Durango

1 Answer

2001 Dodge Durango


Many times this type of issue is caused by the motor that changes the transfer from 2 to 4 wheel drive, they get stuck, another issue is dirty fluid, have you had the transfwer case serviced?

Sep 07, 2008 | 2001 Dodge Durango

Not finding what you are looking for?
2006 Dodge Durango Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...