Question about 1993 Geo Prizm

1 Answer

I have a geo prism and it keeps blowing the AM 2 fuse what could it be?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check to see if your power wire (red) is touching metal

Posted on May 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fuse for taillights in 1996 geo prism


In the fuse box under dash or bonnet.

Nov 09, 2014 | 1996 Geo Prizm

1 Answer

Wiring diagram 93 geo tracker


all last post was error, under GEO Prism the car is really
a 93 tracker, not that is much more easy
make sure you know what engine you have first. 8valves or 16v
as every other page is different by those 2 factors. (engine type)
most are here. (to make car run and lamps work)
http://www.fixkick.com/schematics-run.html
yours is here.

page one here, may cover it.

http://www.fixkick.com/power-elect/95%20electrics/95powersistra1.pdf

the link is really just a large fuse. for A./C
did blow the main fuses. messing with battery or alternator or starter>?

on all cars ,before messing, pull the NEG battery lug first.
this prevents blowing out those big puppy fuses.

Apr 01, 2014 | 1993 Geo Tracker

1 Answer

1994 geo prism, fuse blew, I don't have manual


the only fuse for the starter is not located in the fuse box it is located in the positive wires that go to the starter its called a fusible link and when then amperage of the starter exceeds the fusible link rating the fusible link blows the link is usually located inthe positive wire to the starter and at some point fatter then the wire itself

May 04, 2010 | 1990 Geo Prizm

1 Answer

Trying to find fuse box on 1994 geo prism for the dashboard lighting. Found box under hood, but does not contain that fuse


have you checked the fuse box INSIDE the car?? usually there are 2, one in the engine compartment, one either on the drivers or passengers side area

Dec 01, 2009 | 1994 Geo Metro

2 Answers

PO 136 GEO PRISM 1997


Your oxygen sensor needs to be replaced.
The one behind (rear of )the converter on the exhaust system.
The code reads......P0136 (o2 sensor malfunction bank1 sensor 2)

Aug 13, 2009 | 1996 Geo Prizm

1 Answer

Fusebox is fried


First and foremost you need to find out why the fuse melted,this tells me that something shorted but not quite enough to blow the fuse.Probably your best bet would be to contact a wrecking/salvage yard to get the fuse box,I do beleive it can come from a Prism or a Toyota Corolla(a good salvage yard will have a compatability manual)as far as installation any good mechanic will be a able to do it.

Apr 14, 2009 | 1995 Geo Prizm

1 Answer

Fuse replacement for 94 Geo Prism


just unbolt it and replace it, that easy

Mar 12, 2009 | 1994 Geo Prizm

2 Answers

Location of fuel filter-1990 Geo Prism


Right under the master brake cylinder, its really hard to replace it. It has 2 screws, one bolt on top and the bottom one needs to be screwed off under the car

Aug 06, 2008 | 1990 Geo Prizm

1 Answer

Tail light fuse keeps blowing on my 1995 geo prism


Took it to the shop. The side marker lights were missing on my son's car. The wiring loops from the side marker lights to the tail lights. As the wires were touching in the front, they shorted out the tail lights. Capped the wires, problem solved!
PS: ordered side marker lights, too.

Jul 15, 2008 | 1995 Geo Prizm

Not finding what you are looking for?
1993 Geo Prizm Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...