Question about 1999 Kia Sportage
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try 1111 if that does not work radio needs to removed for dealer to use reference number on back so they can get code from kia
talk to dealer first.
Posted on Aug 28, 2008
SOURCE: 99 kia sportage starter
if knocking on the starter makes it work everytime then it might need a shim installed between the starter and the block to hold it in a slightly different position to keep the drive gear from wedging into the flywheel
Posted on Feb 13, 2009
The crankshaft pos. sensor is located on the left "driver" side of the engine on the bellhousing and is retained by a single 10mm bolt.The sensor may be tight,be sure to twist as you pull so that it doesnt break off in the bottom end.
Posted on Jul 26, 2009
Kia Sportage 1998-02 Repair Guide
Oil Pan - Removal & Installation
Negative battery cable 2 Top intake manifold bracket bolts Front 3 axle housing mounting bolts, 4WD only Left front bushing from the axle housing mount and lower the front axle housing Both gusset plates from the engine Transmission under cover Engine under cover Oil pan mounting bolts and using a scrapper tool separate the oil pan Oil pan Oil strainer assembly Oil baffle
Fig. Exploded view of the oil pan assembly mounting
Fig. Tighten the oil pan bolts in sequence
Oil baffle. Torque the bolt to 84 inch lbs. (9.5 Nm). Oil strainer. Torque the bolts to 84 inch lbs. (9.5 Nm).
Oil pan. Torque the bolts to 84 inch lbs. (9.5 Nm). Transmission under cover. Torque the bolts to 84 inch lbs. (9.5 Nm). Gusset plates to the engine. Torque the bolts to 33 ft. lbs. (45 Nm). Engine under cover Front axle housing into position. When properly aligned, torque the bolts to 48 ft. lbs. (65 Nm). Intake manifold bracket bolts. Torque the bolts to 34 ft. lbs. (65 Nm). Negative battery cable
Hope helps with this (remember rated this) Good luck.
Posted on Jan 12, 2010
Look on the shifter lever,just bellow the push button. There is another push button there. That's the one you press or depress to keep the transmission on 3rd. gear. Just press it again and the hold light should come off.
Posted on Feb 18, 2010
Tips for a great answer:
May 12, 2017 | Kia Cars & Trucks
Oct 23, 2012 | 1999 Kia Sportage
Mar 04, 2011 | 1996 Kia Sportage
Aug 19, 2010 | 2002 Kia Sportage
Dec 27, 2009 | 2001 Kia Sportage
Aug 30, 2009 | 1999 Kia Sportage
Jul 06, 2009 | 1997 Kia Sportage
Nov 29, 2008 | 2001 Kia Sportage
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: