Question about Cars & Trucks

Open Question

How to change alternator on 2008 Chrysler sebring

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jgwhomeequip
  • 1902 Answers

SOURCE: replacing headlight bulbs on a 2006 chrysler sebring

Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.

Posted on Feb 06, 2009

  • 29 Answers

SOURCE: how do i change the digital clock on the 2008 sebring?

there should be a "H" and a "M" on the console with a small hole beside it,use a pen to push the recessed buttons

Posted on May 06, 2009

Molson02536
  • 3854 Answers

SOURCE: i need to change my alternator but where it is

GENERATOR - 2.5L
REMOVAL
Disconnect battery negative cable from remote negative terminal on shock tower. 
Unplug field circuit from generator. 
Remove the B+ terminal nut and wire Wiring Connections - 2.4/2.5L 
Loosen top mounting ear bolt. 
Loosen pivot bolt, but do not remove. Be careful not to lose nut Generator - 2.5L Engine 
Loosen adjusting bolt on idler to allow removal of the generator drive belt. 
Remove pivot bolt, do not drop spacer. 
Remove top mounting ear bolt. 
Remove upper generator bracket. 
Remove generator. 
INSTALLATION
For installation, reverse above procedures. Tighten all fasteners and add small amount of lock tight.
Good luck and hope this helps.

Posted on Jun 24, 2009

  • 521 Answers

SOURCE: My 2008 chrysler sebring will start the engine but

shift lock switch. this switch is usually connected to a little box on the brake pedal. Look about half way up the pedal from the foot pad and make sure the wires are still intact.

Posted on Aug 14, 2009

tbyoung
  • 154 Answers

SOURCE: where can i find a diagram for a serpentine belt,

Here you go. I hope this helps you.
d379ab8.jpg
8c8f663.jpg

Posted on Jun 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my 2008 Chrysler sebring have two thermostats


there is only one thermostat on your car. what you probably have is split temp control one to set temp for the passenger side and one for the drivers side. if so then the temp control door on the passenger side is probably not functioning properly. take it to a shop to have fixed.

Nov 30, 2014 | 2008 Chrysler Sebring

1 Answer

Cant get it out of park


cant shift out of park 2008 sebring conv

Apr 02, 2010 | 2008 Chrysler Sebring

1 Answer

How do i change the alternator on a 6 cylinder 05 chrysler sebring??


YOU NEED A HAYNES REPAIR MANUAL.IT WILL SHOW YOU STEP BY STEP HOW TO REMOVE THE ALTERNATOR.

Jan 24, 2010 | 2005 Chrysler Sebring Conv

1 Answer

My 2008 chrysler sebring will start the engine but


shift lock switch. this switch is usually connected to a little box on the brake pedal. Look about half way up the pedal from the foot pad and make sure the wires are still intact.

Aug 13, 2009 | 2008 Chrysler Sebring Convertible

1 Answer

How do i change the digital clock on the 2008 sebring?


there should be a "H" and a "M" on the console with a small hole beside it,use a pen to push the recessed buttons

May 06, 2009 | 2008 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

947 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...