Question about 2007 Chevrolet Tahoe 5.3
I Have a 2007 LT and I have changed starters in multiple fords before, but never a Chevy. Any advice?
The last time icoudnt find a starter on my 1999 cadillac sedandeville i got in contact with the parts dept at cadillac and they told me icouldnt see it because it was underneath the upper intake maniflold unbelaliable but that where it was call your local dealership they probaly will help you they helped me.
Posted on Jan 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1999 Chevy Blazer Starter
the starter is located on the passenger side lower motor. it has two bolts in it that hold it in place. it actually goes through a hole/slot in the transmission to the flex plate.
1st. disconnect the negative cable on the battery.
2nd. raise the vehicle safely and place a jack stand under the vehicle out of your way but near where you will be working(for safety).
3rd. remove the two bolts that hold the starter in place.
4th. remove the wires from the back of the starter.
5th. install in reverse order of above.
note: there may be little plates between the starter and the mounting points called shims. if there are then make sure you put them back.
Posted on Sep 24, 2008
pop out the center trim piece with a flat head screwdriver. Center dash piece may be brushed aluminum or wood grain depending on trim level. It should pop out easily working all the way around it. Then radio is held in with 7mm screws.
Posted on Sep 25, 2008
The starter relay is in the engine compartment close to the battery. Its a black or gray box 4" x 4" and may say relays or nothing at all. Lift the cover and get owners manual for exact location inside the box.
Posted on Dec 02, 2009
i suggest removing the flywheel inspection cover, and rolling the engine over a little bit at a time, checking to make sure that there are no worn or broken teeth. also, make sure there is no lateral movement, which could indicate a broken flexplate. good luck.
Posted on Dec 08, 2009
Tips for a great answer:
Feb 07, 2016 | 2007 Ford Five Hundred Limited Sedan
Nov 15, 2015 | Cars & Trucks
Dec 11, 2014 | 2007 Chevrolet Malibu
Dec 03, 2012 | 2006 Chevrolet HHR
Dec 06, 2010 | 2007 Chevrolet HHR Panel LT New Cars
Jun 19, 2010 | 1991 Toyota Camry
Jan 29, 2010 | 1989 Ford F 150
Jul 02, 2009 | 2007 Chevrolet Avalanche LTZ
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: