Question about 2005 Chevrolet Suburban 1500

1 Answer

Control panel on the drivers side door all lights not working.

On the drivers side. . All of the lights in the control panel are not working but the buttons all have function but the mirrors will not adjust. Even the heated seat lights will not work. Having a problem with the battery running down over night.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

You probably have a short up in the dash

Posted on Jan 17, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 2003 chevy silverado

It needs a new right side door module it requires programing

Posted on Aug 16, 2008

  • 1986 Answers

SOURCE: removing door panel drivers side to connect mirror wiring behind this panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Trendy-Bee
  • 156 Answers

SOURCE: Power door locks and driver side power window not

You can do it yourself.

Couple of times when you replace the remote battery, you might have them not working/ responding but just follow the procedure below.

Stand close to the car, hold down the open and close knobs for about 10 seconds. Press them at the same time for 3 seconds; then press the open button as the car opens.

The above procedure is applicable to a lot of car brands. It does not matter how many knobs you might have on the remote fob.

I have carried this procedure out on a lot of brands ranging from Honda, Toyota, Rover, Ford, etc. and it works perfectly well.

Good luck and Rate this.

Cheers

Posted on Dec 30, 2009

  • 1810 Answers

SOURCE: 2003 Chevy Tahoe. Driver's side power window

check releys and wires in door jam 1 might be broken failing that u need a new switch

Posted on Jan 13, 2010

  • 2 Answers

SOURCE: Power door locks and driver side power window not working

The solution to this issue was recently discovered during our most recent trip to the shop. We told them not to leave the window down when they changed the battery... BUT DID THEY LISTEN...NOOOO.

So quite by accident I was finally able to correct and then test fail the system and test and fix again...

Here you go.;
1. disconnect the battery and connect both the positive and negative cables together(after disconnected))
2. disconnect the window and lock controller in the driver's side door.
3. Leave cables connected for at least 5 minutes
4. Re-connect door window controller and locks wiring harness
5. Place the key in the ignition and turn to the run position
6. Connect Battery starting with the negative cable(ensuring not to connect then disconnect, (one swift motion)
7. open drivers side door and turn key to the off position(do not remove)
8. You should hear a series of dings
9 Once dings are heard remove the key from the ignition and you should hear the door lock solenoids activate..
10. Congrats.. Your done and the windows and locks work.

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 chevy trailblazer driver door controls don't work, interior light won't work when driver door is opened. The other three doors work ok


There two common problems with the driver's door control panel, rain water gets into the module and damages the electrics or the wires in the door boot break or abrade and short out. To check out the control panel itself, take the passenger side panel and hook it up to the drivers side, if everything works, replace the driver's panel.

Dec 16, 2012 | 2003 Chevrolet TrailBlazer

2 Answers

I have a 1998 chevy suburban. The dome lights don't work. checked fuse box under hood. All good. Are there other fuses on the truck?


Instrument Panel Fuse Block
The instrument panel fuse block access door is
located on the driver side edge of the instrument panel.

Pull off the cover to access the fuse block.

The vehicle may not use all of the fuses shown.

Fuses Usage
1 Rear Seats
2 Rear Accessory Power Outlet
3 Steering Wheel Controls Back light
4 Driver Door Module
5 Dome Lamps, Driver Side Turn Signal
6 Driver Side Turn Signal, Stop lamp
7 Instrument Panel Back Lighting
8 Passenger Side Turn Signal, Stop lamp
9 Passenger Door Module, Driver Unlock
10 Power Door Lock 2 (Unlock Feature)
11 Power Door Lock 2 (Lock Feature)
12 Stop lamps, Centre High Mounted Stop lamp
13 Rear Climate Controls
14 Power Mirror
15 Body Control Module (BCM)
16 Accessory Power Outlets
17 Interior Lamps
18 Power Door Lock 1 (Unlock Feature)
19 Rear Seat Entertainment
20 Ultrasonic Rear Parking Assist, Power Liftgate
21 Power Door Lock 1 (Lock Feature)
22 Driver Information Centre (DIC)
23 Rear Wiper
24 Cooled Seats
25 Driver Seat Module, Remote Key less Entry System
26 Driver Power Door Lock (Unlock Feature)

Aug 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

The auto door lock, side mirror, and "driver 1/driver 2" auto controls don't work on the driver side. The power windows do work on the driver side. The auto door lock works on the passenger...


I have the same problem only now the door won't register that it is even closing! So I have to drive with the door ajar light on, and the inside lights stay on too unless I turn off all the paneling lights. I am not sure what is going on. But I am taking it into the shop on Monday to find out what is going on. I could handle not having my controls on the driver side, but this door thing is wigging me out! Hope you get yours fixed

Dec 29, 2010 | 2004 Dodge Durango

2 Answers

I have a 2004 Jeep Grand Cherokee Laredo. The door locks and windows don't work from driver's door controls. The dash lights are dim with the headlight turned on. The rear interior lights only work when...


Hi,

Sorry to hear your having this problem.
The door jamb switch will not usually cause this much of a problem. As you may be aware of electrical problems can be easy or they can be rough.
Let's assume for the situation here it is an easy one.

There are several connections in the door that can effect the entire circuit.
If the door locks work from the passenger side and not the drivers side - you will need to pull the door panel from the car to have a look see.

This is not as hard as it looks if you use the right tools.

removing the panel requires you remove the proper screws and the pull handle/arm rest. there is a removal tool for the outside of the door panel where it meets the door. I suggest you invest in one to save the value of your auto- no rips in the door panel = more money when selling.
Once you get the 'DOOR PANEL REMOVAL TOOL' - please go to your local Advance Auto - Auto Zone - Etc - and get one - -
slip this tool between the door panel and the metal it is attached to. REMEMBER - if the door panel resist - there are MORE things to loosen and here is where you become a pro - - just be PATIENT and think of ALL the money you're saving and remove every screw and panel tab etc -
Remove the panel and set it aside.
Get GOOD NEW BATTERY flash light and shine it into the door with the window up - this will show you any frayed wires etc.
make sure the wires going into the control for the windows - doors is solid and tight - and with that hooked up [ brace the panel and have a helper hold it into place as they will not work unless hooked up for testing.
If nothing changed - remove the control and replace it.

Pictures as you remove this will help A LOT - when you go to replace it -
I STRONGLY - - STRONGLY recommend someone else to take the pics as you remove things - it will help you - and yes us pros do this all the time
Best of it

Gary
Please vote me up
RICESKI

Mar 20, 2010 | 2000 Jeep Grand Cherokee

5 Answers

Driver side door switches are not working. Dome


My power locks, windows didn't work and the dome lights would not turn off after closing the door. I removed the black boot that was attached to the drivers door by lifting upward and pulling away from the door. A heavy gauge black wire was broken. I removed about 3/16" of insulation from both ends of the broken wire and connected them by using a connector that both ends are placed in to and then "crimped" both ends so the broken wire made contact with each other and everything worked perfectly! The hardest part was replacing the boot. Total cost to fix is $0.50.

Jan 14, 2010 | 2004 Jeep Grand Cherokee

1 Answer

I own a 2007 trailblzer The driver side


try removing panel and check for loose or worn contacts, or replace the panel cluster with a new unit or one from a junked unit in good condition if cost is a factor

Sep 27, 2009 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

How to remove drivers door panel from 1997 Cadillac Deville.


try to look at stress point on door by handle normally two screws and under neath panel to screws also disconnect side panel for side mirror door of using panel popper

May 23, 2009 | 1997 Cadillac DeVille

2 Answers

All of the power windows just went out on my 04 Jeep Grand Cherokee. The power locks work on the passenger side door but not on the drivers side. None of the controls work on the drivers side including the...


slide the rubber boot up and check the wires in the hinge of the doors. I will bet anything that the wires are broken. that was what was wrong with mine. just splice them back together and everything should work fine.

Mar 09, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Drivers side window control not working


My opinion it is that it is, in fact, the driver's door switch panel and you should try replacing it (try EBay). The problem could ether be worn out switches, or there is a problem with the distribution of power to all the switches in the panel. You should be able to easily diagnose the problem by pulling the switch panel (without removing the door panel) and checking switched power at each switch at the back with a multimeter.

Seat heating pads are built to flex but are a bit flimsy. As they get older and have been sat on many times, the element wiring can break in the weakest spot causing the problem. Unfortunately, to check out the wiring, you usually have to remove the seat.

Sep 19, 2017 | 1998 Cadillac Eldorado

1 Answer

Power windows dont work and the same problem with the power locks


the harness that is between the drivers door and the "a" pillar probably has some wires broken.

Dec 09, 2008 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
2005 Chevrolet Suburban 1500 Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...