Question about Cars & Trucks

Open Question

How to replace windshield washer pump for 2009 murano

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
freetek
  • 5568 Answers

SOURCE: 2002 Dodge Caravan Windshield Washer

If the pump still makes noise, you may just have clogged nozzles, have you tried those yet? Also, if you have windshield cleaner left over from summer, it may have frozen in the lines. 

Posted on Jan 26, 2009

Ad
  • 1 Answer

SOURCE: replacing windshield washer pump

I assume you access from underneath. Remove plastic shroud and expose reservoir and pump? right?

Posted on Nov 11, 2008

  • 12 Answers

SOURCE: windshield washer problem

Disconnect the line at the pump and see if there is adiquate flow and pressure. If so reconnect and check for a kink in the line. If not try and back wash the system, meaning disconnect at the pump and force the water in the opposite direction from the lines in an attempt to dislodge any thing that may have gotten stuck in the line.

Posted on Jan 23, 2009

  • 16 Answers

SOURCE: Removing the windshield washer reservoir in a 2002 Chrysler T&C

REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove the engine fresh air housing inside the engine compartment.
  3. Disconnect the washer hose at the in-line connector forward of the cowl grille so that the in-line connector remains with the washer hose from the fresh air plenum.
  4. Disconnect the washer hose from the hose clip located on the front fender side shield.
  5. Remove the filler tube screw.
  6. Hoist and support vehicle on hoist or jack stands.
  7. Remove the right front wheel and tire assembly.
  8. Disconnect the left right front wheelhouse splash shield and move aside.
  9. Drain washer fluid from the reservoir and into a suitable clean container. This can be done by disconnecting the windshield washer hose from the front (outboard) washer pump and allowing the washer fluid to drain into a container through a temporary jumper hose connected to the front washer pump.
  10. Disconnect the electrical body harness connectors to the washer pump motors and the fluid level sensor. Slide the red lock on the connector to the release position, then, depress the black tab and pull the connector off the pump or sensor.
  11. Remove the two reservoir mounting screws.
  12. Disconnect the reservoir from the body mount by raising the reservoir upward slightly and then down so that the reservoir filler neck and front washer hose pull through the opening in the front fender side shield.
INSTALLATION

  1. Push filler neck and front washer hose through the opening in the front fender side shield. Connect the reservoir to the body mount by lowering the reservoir down.
  2. Install the two reservoir mounting screws. Torque screws to 8.5 - 11.3 Nm (75 - 100 in. lbs.) .
  3. Connect the electrical body harness connectors to the washer pump motors and the fluid level sensor. Slide the red lock on the connector to the closed or locked position.
  4. Assure that washer is properly routed to prevent pinching and possible inoperative washers.
  5. Connect the left right front wheelhouse splash shield and move aside.
  6. Install the right front wheel and tire assembly.
  7. lower vehicle from hoist or jack stands.
  8. Install the filler tube screw. Torque screw to 8.5 - 11.3 Nm (75 - 100 in. lbs.) .
  9. Connect the washer hose to the hose clip located on the front fender side shield.
  10. Connect the washer hose at the in-line connector forward of the cowl grille.
  11. Install the engine fresh air housing inside the engine compartment.
  12. Connect the battery negative cable.
  13. Verify system operation.

Posted on Apr 01, 2009

  • 103 Answers

SOURCE: replacing front windshield washer pump. Where is

The front pump is the 1 you want.Carefully raise the right front of the vehicle.Install a jack stand or something that will keep the vehicle in the air,if the jack should happen to slip or loose presure causing the car to fall.
Remove the R.F. wheel and splash shield,then remove the pump.You should wear gloves and safety glasses due to the chemicals in the washer fluid.
Please rate this.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the windshield washer motor fuse located ?


images for 2009 Nissan Rogue SL Where is the

Windshield Wiper Pump - Not working - Nissan Forum ' Nissan Forums

forums.nicoclub.com/windshield-wiper-pump-not-working-t581434.html
Oct 22, 2013 - Year of vehicle -- 2011 Nissan Rogue SL Leather/Nav Package ... rather an engineer and found that my windshield washer pump was not ... sprocket: Posts: 150: Joined: Thu Jun 11, 2009 1:27 pm: Location: Metro Detroit, MI ... windshield washer fluid switch backwards ?
Apr 27, 2012
Windshield WASHFLUID ISSUE!
Dec 11, 2009
Front windshield sprayers not working..AHH!!!
Nov 10, 2009
More results from forums.nicoclub.com

Jan 11, 2016 | 2009 Nissan Rogue SL

2 Answers

Where is the windshield wiper pump located on dodge caravan 2005


The washer pump is located in the bottom of the washer fluid tank

May 24, 2015 | 2005 Dodge Caravan

1 Answer

Which fuse controls the windshield washer pump on a Mazda Tribute


check for power and ground at the washer pump electrical connection. if you have these then the washer pump is no good and needs replacing.

Sep 18, 2014 | 2009 Mazda Tribute s

1 Answer

Windshield fluid emitters are clogged up


Have you determined if it's the pump yet? You can pull a hose off where it connects to the spray nozzle. Hit the button, if fluid pumps out the pump is good. After that I would try a fine needle to clean the orifice. If you know anybody with an air compressor, you can blow pressurized air thru. Good luck

Mar 21, 2014 | 2009 Nissan Murano

1 Answer

The windshield washer will not shoot fluid on to windshield is it the Fuse


It may not be your fuse, your windshield fluid reservoir has a pump that when you activate the switch it pumps the fluid to spray your windshield. The fuse box should be located in the engine compartment on the left hand side or the right hand side of the engine.

Nov 21, 2013 | 2009 Kia Rio

1 Answer

2009 nissan frontier windshield washer pump won't work


Check fuse in fuse box inside vehicle,if good,then go to windshield washer pump and disconnect wiring,get meter and check if power is going to pump,if so then pump is at fault,if no power,thenwiring could be short somewhere to fuse box.Also check your washer hoses,that they are not kinked or came loose.Pump could just be loose.

Jan 04, 2013 | 2009 Nissan Frontier

1 Answer

How do ypu replace wiper washer pump on a 06 armada?


unbolt it and put it bach the way it came off flow the lines you find the pump

Jun 25, 2012 | 2009 Nissan Armada

1 Answer

Windshield washer does not work; no sound coming from the motor/pump. where is the fuse for the windshield washer motor/pump?


check wiring to pump with test light see if hot first, If not find fuse in owners Manuel, if its hot need a pump, they do go bad

Mar 15, 2011 | 2004 Nissan Murano

2 Answers

WHERE DO i FILL WIPER FLUID IN REAR FOR 2006 NISSAN MURANO?


The fluid for both windows comes from the front resivoir. The pump there is suited to pump either to the front or to the rear based upon your operation of the switch & if the rear isn't working, the line will need to be removed near the pump & checked for obstructions.

These can be cleaned with a vacuum tester, the kind that lets you pump the unit & draw a vacuum, connected to the hose, it will draw any debris back out of the tube. You probably don't want to try & force fluid through the hose as it won't fit through the washer nozzle.

good luck

Jan 20, 2010 | 2006 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...