Question about 2000 Chevrolet Express Cargo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to drop the fuel tank. It is inside. Hope the tank is near empty, remove the 2 fuel fill hoses, you have two straps, lower tank, remove 3 wire connectors, and several more lines. Please use an ac delco fuel pump module. It may come updated with a new wiring connector to fix the old ones problem. If it does, you have to rewire the van following the directions.
Posted on Mar 27, 2009
You actually have two separate problems. The brake pull to the right is indicating the left side brake is not working properly. You will want to remove the left front wheel, collapse the caliper piston and make sure the caliper is floating freely on its mounts.
With the piston collapsed you should be able to slide the caliper inboard and outboard of the rotor. If not, you will want to remove the attachment pins, clean and lubricate the pins. If they are grooved or worn you will have to replace them.
The second issue of the ABS light is indicating the system has detected an electrical sensing or control problem. Take the vehicle to your local Auto Zone or Advance Auto and ask them to scan the vehicle for trouble codes. They will scan it for you at no charge.
Chances are you will find a wheel speed sensor problem at one of the wheels.
Write the codes down and respond back, we can start diagnosing the problem,
Good luck, let me know.
Posted on Aug 31, 2009
get into the oil change where it tells you what percent of oil life is left before change,then hold the reset button by the readout for 5+sec till it goes to 0 percent oil life use
Posted on Oct 27, 2009
You have to remove the upper applique to remove the tail lamp, it is the trim panel above the lamp. I think it is held in place by two nuts/bolts but not sure. You have to have the rear doors open to remove it
Posted on May 23, 2010
SOURCE: 1999 Chevy Astro Cargo Van.Where
Hello eleazzrismo; my name is Roger and I will help: The fuel pump is located inside of fuel tank. The fuel pressure test port is on top of the engine.Just to the right of the throttle body. You should find a port with a schradder valve in the fuel line. Could have a metal cover like a tire cap over it. The fuel pressure should be 60-66 psi. Any less and you will have poor to no start. I have attached a picture to help identify the fuel port. Should you need further help please just ask. Please rate the answer. Thank You for using and trusting Fix Ya. Roger
Posted on Dec 21, 2010
Tips for a great answer:
Jun 05, 2015 | 2003 Chevrolet Astro Cargo
Feb 27, 2015 | 1995 Chevrolet G20
Feb 05, 2014 | 2005 Chevrolet Express Cargo
Jun 16, 2012 | 1999 Chevrolet Silverado 1500
Dec 21, 2010 | 1989 Chevrolet Astro Cargo
May 23, 2010 | 2008 Chevrolet Express
Jan 07, 2010 | 1994 Chevrolet Cargo
Dec 08, 2009 | 2000 Chevrolet Express Cargo
Mar 27, 2009 | 1997 Chevrolet Cargo Van
Oct 30, 2008 | 2000 Chevrolet Express Cargo
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: