Question about Toyota Celica
To remove the shift knob on a 2002 Toyota Celica GT just turn it rather hard counter-clockwise while in neutral. To remove the shift boot, it's easier to remove the carpet. There's a few screws that are under the carpet, remove them, then you can take out the boot.-----------------------------------------------------------------------------
BENZ STAR C3 Super Mb star updated by internet 2012.11 Fit all computer
Posted on Jan 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Are you hearing any noises from the pass door when you activate the lock switch? If not, the power door lock solenoid has failed, and prob needs to be replaced. Pull the door panel & check to see if it is getting power to the solenoid in lock & unlock. If it has power, the solenoid is def bad.
Posted on Sep 19, 2008
There is a knob beside the headlights under the hood, fairly good sized, looks like rubber and you can manually turn down your headlights. That happened to my 86 Supra last year and the sync was just off and once I turned them down they started working perfectly. Hope this helps
Posted on Apr 04, 2009
You have a high compression ratio engine and it's recommended to use 91 octane. You can get away with the 89 octane, but the higher the better for the engine. Less chances of detonation (Engine Knock), Take note that it's best to keep faith full on servicing the Engine for Oil and filter changes. Good luck and keep me posted, be glad to help.
Posted on Jun 12, 2009
First of all, be certain that the leak is in fact from that seal. many leaks travel to that area.
To change the seal is fairly involved, you need to pull the trans and flywheel. There are some specialzed tools involved. Do you have manual or automatic? Manual requires clutch plate alignment on re assembly, by the way , if manual, be sure to change the release bearing and pilot bearing at minimum. Commonly it would make sense to change the clutch during this process....you're already all the way in there..
Posted on Sep 07, 2009
Tips for a great answer:
Aug 11, 2014 | 1989 Toyota Celica GT
Jun 22, 2010 | 1992 Toyota Celica
Jun 15, 2010 | 2003 Toyota Celica
Apr 18, 2010 | 2001 Toyota Celica
Sep 12, 2008 | 1998 Toyota Celica
Jul 10, 2008 | 2002 Toyota Celica
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: