Question about 2009 Toyota Corolla Automatic
I would like to know how can I work with the lower pressure switch. It migh be that because the fan and the gas pressure are okay.
You may also have too high of high end pressure also..or a possible partially clogged orafice, or even with good pressure, the wrong type for the system(just guessing),,the system is designed to cycle up and down.. need to put guages on it and see what the pressurs actually are when running..some of these cut ins and outs are not serviceable parts on newer cars and total compressor replacement is called for, just as a warning,, good luck
Posted on Jan 17, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
First of all this car does not use Freon. It uses R-134a refrigerant.
Recharge through the a/c low side port, on the passenger side just in front of the firewall.
Frank's Friendly Cars Maui Car Rental
Posted on Aug 30, 2009
No. The pressure listed on the tires is the MAXIMUM safe tire pressure. Set at that level, your vehicle will bounce like a ball whenever it hits the slightest bump. Check the driver's door and door post. One of them will have a sticker that lists the factory tire size and recommended pressure. The sticker pressure is the comfort setting. For increased fuel mileage, inflate your tires to 4 to 6 psi above the sticker number.
Posted on Oct 25, 2009
Here is an image of the resistor pack, if that helps:
Posted on Sep 01, 2010
Tips for a great answer:
Oct 24, 2014 | 2009 Toyota Corolla
Jun 24, 2012 | 2003 Toyota Corolla
Sep 05, 2011 | 1990 Toyota Corolla
Aug 25, 2011 | 2004 Toyota Corolla
Sep 15, 2010 | 1990 Toyota Corolla
Dec 22, 2009 | 1996 Toyota Corolla
May 30, 2009 | 1989 Toyota Corolla 2 Door
Jul 20, 2008 | 2006 Toyota Corolla
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: