Question about Cars & Trucks
Truck wouldn't start & the fuel gauge reads empty but the tank is full changed both fuel filters still won't start, appears to be getting fuel.
Crack open an injector line and look for fuel at that point if no fuel there, take off oil filtertype fuel filter and look to see if it has fuel in it..we had a ford f650 superduty that a driver ran empty and were forever bleeding att hthe air out of the system to restart it..on diesels the system can have no air in the lines anywhere..so if the filter is empty, fill it before installing it...saves on the starter getting hot...in extreme cases you can pump pressure into the tank up to 20 psi and force fuel up front be careful on plastic tanks though...good luck and repost please...
Posted on Jan 17, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Youre gauge is controlled by a plunger in the fuel tank which is attached to the sensor and the fuel gauge. it sounds like when the plunger goes down half way its either getting stuck down lower then it should. Needs replacing. Any mechanic can do this install for you.
Posted on Aug 27, 2009
It is the fuel heater, All you have to do is unplug it.
Posted on Jan 06, 2010
Testimonial: "Thanks for the diagnosis. It's disappointing that our local Ford service will not advise to help get it running, even to make it in for service."
Tips for a great answer:
Mar 19, 2013 | 2004 Ford Explorer
Oct 14, 2011 | 2000 Ford F350 Super Duty Super Cab
Dec 17, 2010 | Ford F-350 Super Duty Cars & Trucks
Nov 06, 2010 | 2006 Ford F 350 Super Duty
Dec 27, 2009 | 2000 Ford F350 Super Duty Super Cab
Oct 27, 2008 | 1990 Ford F350
241 people viewed this question
Usually answered in minutes!