Question about 1996 Chevrolet K1500

Open Question

Ball joint torque specs - 1996 Chevrolet K1500

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 17 Answers

SOURCE: need to know the torque

for a 72 which is the same front end: upper-install new joint torque the bolts that hold it on the a-frame to 45 ft. lbs. then torque the ball stud as follows: 40-60 ft. lbs. plus additional torque to align cotter pin not to exceed 90 ft. lbs. never back off to align cotter pin. then install cotter pin.

Posted on May 19, 2009

emissionwiz
  • 75117 Answers

SOURCE: torque spec for lower ball joint on 2002 chevy

100 foot pounds

Posted on Nov 02, 2009

mychkelbey
  • 12 Answers

SOURCE: 2005 malibu maxx ball joint and lower control arm torque specs

A Ball Joint Can Usually Be Replaced Without Removing The Control Arm From The Vehicle. Place The Vehicle On Jack Stands. Remove The Shock Absorber And Install A Spring Compressor on The Coil Spring.Remove The Nut Securing The Ball Joint To The steering Knuckle And Separate The Knuckle And Then Joint. The Ball Joint Should Be Pressed,Riveted,Bolted,Or Screwed Into The Control Arm.A Service Manual Will Give The Details For The Specific Make And Model Vehicle.

Posted on Apr 09, 2010

reisdos
  • 1297 Answers

SOURCE: need the torque specs for

hope this helps...

4c17033.jpg

2c46aed.jpg

Posted on May 11, 2010

SOURCE: Hello, I am looking for torque specs on the upper

Tighten nuts to 52 lb ft. Tighten bolts to 81 lb ft. Tighten upper ball joint to steering knuckle nut to 147 lb ft. Tighten bolt and nut to 18 lb ft. Tighten brake hose bracket to 106 lb in.

Posted on Aug 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Upper ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas


Douglas, 90 lb-ft is ball joint nut torque.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Upper Control Arm and Ball Joint 2002 05 Ford Explorer...

Apr 02, 2016 | 2002 Ford Explorer

1 Answer

Lower ball joint torque specs


You will find a guide here. If you provide make and model, I might be able to find it.

http://www.toyota-4runner.org/3rd-gen-t4rs/123657-ball-joint-bolts-torque-specs.html

May 30, 2015 | Cars & Trucks

1 Answer

Looking for upper and lower ball joint torque specs 2005 Toyota sequoia


What is theTorque on front ball joints 2005 Toyota sequoia ...

www.fixya.com/cars/t25021879-thetorque_front_ball_joints_2005_toyotaAug 28, 2014 - Tightening specs for castle nuts - Toyota 2005 Sequoia question. ...There are no torque specs for the upper or the lower ball joints on any of

Aug 28, 2014 | 2005 Toyota Sequoia

1 Answer

2008 dodge ram 2500 diesel 4x4 upper and lower ball joint torque specs


Big A-- there are specs for the ball joint stud nuts!!
You're the exact reason I don't take mine to dealerships!!!
Do my own work.
Torque specs are put out for a reason u DA!

Jan 28, 2012 | 2008 Dodge Ram 2500

1 Answer

I need to know the torque-specs on the bolts for the CV shaft on a 1993 90 s. I need both the specs for the 6 bolts that hold the cv shaft to the transmission, as well as the 1 big outer-spindle...


Axle shaft bolt should be torqued to 147 Ft Lbs plus 1/4 turn.

The six CV joint bolts should be 59 Ft Lbs.

Ball joint nut should be 48 Ft Lbs

Hope this helps.

Sep 08, 2011 | 1993 Audi 90

1 Answer

Torque on front ball joints 2000 Honda Passport 2 wheel drive


Lower ball joint specs:
Torque the ball joint-to-control arm nuts/bolts to 85 ft. lbs. (115 Nm). Torque the castellated nut to 108 ft. lbs. (147 Nm).

Upper ball joint specs:
Tighten the mounting bolts to 42 ft. lbs. (57 Nm) and the castellated nut to 72 ft. lbs. (96 Nm).

Feb 28, 2011 | 2000 Honda Passport

1 Answer

My trw lower ball joint came with torque specs for the mounting bolts to 15ft.lbs each.. My trw upper ball joint came with no specs for the mounting bolts which are smaller bolts than the lowers, how do i...


I've replaced many ball joints, and never used a torque wrench. Just make them tight. If yours are the type with cotter pins, then you make it tight and slip in the cotter pin.

Sep 24, 2009 | 1996 GMC Jimmy

3 Answers

Ball joint installation


Go with what the ball joint specs. Besides only 2 ft.lbs. on a ball joint won't make a difference. But the parts recommendation should be used.

Sep 23, 2009 | 1996 GMC Jimmy

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...