Question about 1994 Buick LeSabre

1 Answer

The car wil start it and runs fine, I turn it off and it wont start again engine turns but no fire

I cannot be sure if the engine will start or not sometimes for a few minutes other time for an hour or so. It always starts eventually. The security light flashes I've tried all the tricks I know of with the keys. It is a 3.8 ltr V-6 any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 165 Answers

CALL UR NEAREST DEALLER AND THEY WILL GIVE YOU YOUR SECURITY CODE FOR FREE

Posted on Jan 16, 2013

  • 7 more comments 
  • Clive E. Sheffield
    Clive E. Sheffield Jan 17, 2013

    I'M NOT SURE HOW KNOWING THAT CODE WILL HELP ME, PLEASE EXPLAIN.

  • FRANK Jan 18, 2013

    because they will tell u exactlly where to reset it on your car and evreything will come back to normal

  • Clive E. Sheffield
    Clive E. Sheffield Jan 18, 2013

    I'm not a mechanic, I don't know how to reset it. Can you tell me how?

  • FRANK Jan 19, 2013

    is your car alarm from the manufactuar ????

  • Clive E. Sheffield
    Clive E. Sheffield Jan 19, 2013

    I just recently bought it as far as I know it doesn't work.

  • Clive E. Sheffield
    Clive E. Sheffield Jan 19, 2013

    I've found nothing in the owners manual about an alarm.

  • FRANK Jan 21, 2013

    call the dealler and give them your vin number year make model and they will be able to fill u in .....also what year and model is it that way i can check it out with my dealer and i can give you the number

  • FRANK Jan 21, 2013

    ok i forgor to read on top still call your nearest olds dealer and give them that info,if not they will direct you to who you can call from oldsmobile : )

  • FRANK Jan 21, 2013

    buick alarm info ,my bad working on 2 cars lol

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont start when warm


It always helps to tell us what you are working on. Could be bad coolant temp sensor; bad coil or module (these heat up after you turn hot engine off); improper fuel pressure (test with gauge); leaky injector(s).

Apr 27, 2016 | Cars & Trucks

1 Answer

1999 f150 turns over fine, at times wont run


When it won't start is there spark , does the check engine light come on when you turn the key on ? What's battery voltage at when it won't start , is the charging system working . When it won't start check power an grounds to the PCM/ECM - engine computer , your need a PCM/ECM connecter pin out .

Jan 22, 2016 | Cars & Trucks

1 Answer

1995 ford contour 2.0 L turns over but wont start put in new fuel pump and filter and still wants to start but wont what should i check now ?


If the vehicle is equipped with a timing belt, make sure it hasn't jumped throwing the valve timing off.

May 02, 2015 | 1995 Ford Contour

1 Answer

My car wont start sometime, my motor does turnover but it wont fire. it seems like its my gas pump


Try cleaning the throttle plate, where the flapper is. Carbon buildup where it closes. Air entering engine after the mass air flow meter will keep from starting easy. Computer doesn't like air it doesn't know about.

Aug 31, 2017 | 2003 Cadillac CTS

1 Answer

1998 terrano immobiliser fault wont start


hi, i have nissan terrano wen i switched on engine light flash and start engine its start then go of.nissan terrano patrol engine

Sep 06, 2012 | Nissan Sentra Cars & Trucks

1 Answer

Turns over but wont start. 1997 chevy 2500 4x4


Check to make sure that the grounds are good on the engine...the scanner error could be that...and does the service engine light come on when you turn the key to run position? If not, I would take a close look at the PCM.

Oct 29, 2009 | 1997 Chevrolet C/K 2500

1 Answer

My 1991 honda civic runs fine yesturday and today it wont start please help


the car wont start? do you mean the engine wont turn over or it wont fire or run? if the car does not run but it turn over, check the basic..see if you have sparks and fuel, then check all your fuse pertaining to engine and ignition. the car need to have both thing in order for the engine to run. If you getting both sparks and fuel you engine may have jump time especially with older car with high miles, it the sign timing belt getting worn, you don't want it to break. if you don't get fire from spark plug then you may have a bad coil,distubutor,rotor or timing sensor. if you get no fuel, fuse blown, bad fuel pump relay or fuel pump it self. hope that help some ..good luck

Jul 09, 2009 | 1991 Honda Civic

1 Answer

Onece in a while turn over wont fire. runs great other wise


your injector or fuel pump may be going out, next time when you check the issue, check your distubutor again and making sure you getting sparks, if you do have sparks than it has to be your fuel problems.

Jun 25, 2009 | 1991 Honda Civic

1 Answer

1996 gmc 5.7 vortec It turns and turns but wont start


the three things an automobile has to have to run are compression, fuel, and fire. I think you need to check the firing. I would remove one of the plugwires and insert a screwdriver into the end of the plugwire, have someone turn the engine over while you hold the screwdriver about 1/4 inch away from metal on the engine if you get a spark then it is firing and you need to move on the next option. I hope that helps!

Feb 13, 2009 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
1994 Buick LeSabre Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...