Question about 2001 Isuzu Rodeo

1 Answer

Why dont i have spark from spark plugs - 2001 Isuzu Rodeo

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Isuzu Master
  • 76,846 Answers

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exceptions to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Posted on Jan 16, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ARE any plugs on the engine of Isuzu kb 250 -2005 model - where I can find them


are any?
what are plugs, spark or core plugs?
or electrical plugs/
or?
this is a usa forum and we dont have KB here, where are you.
my wild guess is you have petrol engine.
and cant find the spark plugs
they are under the COP coils
on all DIS gas engines. unless it has wasted coil packs.
fact.
COP means coils over plugs.
4 on 4cy'
6 on 6
8 on 8

Cops effective hide spark plugs, to beginners,
dont cross thread your spark plugs.

Jan 27, 2016 | Isuzu Cars & Trucks

1 Answer

What would the gap be for ngk plugs in a 99chev 5.7L


Use the spark plugs recommended for your engine, and NGK's are not the factory emission spark plugs. Dont let some part stores sell you something other than A/C Delco spark plugs. I have seen way way to many problems with "spark plugs they sold me", or "longer life spark plugs", causing problems.

Aug 09, 2014 | Cars & Trucks

1 Answer

How to remove wires from sparkplugs of a guick lucerne


USE A SPARK PLUG WIRES BOOT PULLER.THE BOOT PULLER CAN GO TIGHT PLACES WHERE YOUR HANDS CANT REACH.ONCE YOU REMOVE SPARK PLUGS WIRES REPLACE THEM.SOME PLUG WIRES WILL BREAK AWAY FROM THE BOOT WHEN REMOVING SPARK PLUGS WIRES.DONT REMOVE OLD PLUG WIRES IF YOU DONT HAVE NEW SET PLUG WIRES ON HAND.BECAUSE YOU WILL DISABLE VECHICLE.IF COUPLE OLD PLUGS WIRES BREAK WHILE REMOVING THEM YOU WILL BE 2 PLUG WIRES SHORT AND YOU CANT DRIVE VECHICLE THAT WHY HAVE NEW SET OF PLUG WIRES ON HAND.

May 12, 2011 | Buick Lucerne Cars & Trucks

1 Answer

Plug turned a 1/4 turn and locked down didnt want to force it


no dont force spark plug its trying to cross thread.back spark plug back out.apply thin coat of anti seize compound to spark plug threads.if you have problems getting spark plugs back in a hard to reach place, use a long piece 3/8 vacuum hose about what ever length you need.place vacuum hose over spark plug insulator then install spark plugs to hard reach places to keep from cross threading.if plug tighten 1/4 turn.back out spark plug and try again.dont cross thread or you have to remove cylinder head.if spark plug hole hard to reach to retap or install thread inserts.

Apr 09, 2011 | Toyota Pickup Cars & Trucks

2 Answers

My spark plugs in my 2004 Mitsubishi Endeavor needs to be changed, and my husband wants to do it himself so is there some way to give me some instructions on how to change spark plugs for my 2004...


YOU NEED LONG SPARK PLUG SOCKET. NEED A 3/8 INCH RATCHET WRENCH.YOU NEED EXTENSION.YOU NEED SPARK GAUGE YOU NEED A TORQUE WRENCH. NOT MANDATORY JUST DONT OVER TIGHTEN SPARK PLUGS STRIP ALUMINUM THREADS WAIT UNTIL ENGINE COOL TO KEEP FROM WARPING THE HEADS. SPARK PLUGS LOCATION ON TOP OF CYLINDER HEADS.TO GET TO SPARK PLUGS THE COILS ON TOP EACH SPARK PLUG.HAS TO BE REMOVED BY REMOVING SMALL SCREW.THAT HOLD COILS DOWN.AND CHANGE ONE SPARK PLUG AT A TIME SO YOU WONT GET THEM MIXED UP.GAP PLUGS AT 0.028 - 0.031

Jan 28, 2011 | Mitsubishi Endeavor Cars & Trucks

1 Answer

How to change spark plugs?


First go buy the new spark plugs. While you are there ask the gap of the plugs, they may need to be adjusted before you install them. If so use a gaping tool to adjust the gap. One at a time remove the spark plug wire and remove the old spark plug with a spark plug socket. Turn it counter clockwise. Pull it out and put the new spark plug in and firmly tighten it, dont over do it though you dont want to strip it out. Put the spark plug wire back on and move to the next until the job is complete.

Jan 15, 2011 | 1994 Ford Ranger Supercab

1 Answer

Cant find spark plugs


IF YOU DONT SEE PLUGS WIRES RUNNING DOWN SIDE CYLINDER BLOCK TO SPARK PLUGS.YOUR SPARK PLUGS HAS COILS SETTING ON TOP OF THEM.YOU HAVE A INDIVIDUAL COIL FOR EACH CYLINDER.SOME ENGINES HAS SPARK PLUGS IN VALVE COVERS LIKE CADILAC.SOME ENGINE SPARK PLUGS UNDER ENGINE HEAD COVER WITH COILS ON TOP OF SPARK PLUGS.

Sep 13, 2010 | 1999 Oldsmobile Alero

2 Answers

Changing spark plugs in 2003 chevy trailblazer


CHANGING SPARK PLUGS IN TRAIL BLAZER. YOU NEED TO REMOVE AIR INTAKE RESONATOR AND IGNITION COILS.YOU NEED LONG 3/8 EXTENSION - SPARK PLUG SOCKET - 3/8 RATCHET WRENCH. NEED SPARK PLUG GAUGE AND A TORQUE WRENCH.YOU CAN GET BY WITH OUT ONE LONG AS YOU DONT OVER TIGHTEN PLUGS AND STRIP OUT ALUMINUM THREADS.

Jun 26, 2010 | 2003 Chevrolet TrailBlazer

2 Answers

How do I change my spark plugs on a 1999 Subaru Forester? Mechanics want $80 dollars just for labor to change the plugs.


remove the bettery on the left side of car on the right side of car remove washer bottle remove spark plug wires and take of your spark plugs ( not an easy process hard to get to frame rail in the way)

Aug 28, 2009 | 1999 Subaru Forester

2 Answers

I can't get spark plug wires off of spark plug.


just pull and twist they will come off

Nov 16, 2008 | 2003 Pontiac Vibe

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...