Question about 2000 Jeep Grand Cherokee

1 Answer

Why does my turning signal only work sometimes?

When I turn on the left hand signal it only works sometimes, if I keep turning it on and off sometimes it will come on. The right signal works all the other lights work. please help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 3,103 Answers

First lets check each left light for operation using the emergency flashers.. see which one may be malfuntionig and fix it first..if all work fine then its a switch problem which is in the upper steering column area behind the steering wheel..if you dont feel comfortable repairing it yourself, its a job foe an electrical shop(dealer cost is very high) it sounds like the posibility exsists that the switch may be worn or broken inside.. steering wheel must be removed to address the issue on most models good luck...

Posted on Jan 16, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1998 wrangler turn signal/brake light short

your socket may not be grounded properly, I have seen this before, and the simplest way to fix is change the socket with a new one.Not another used one it may also be bad.

Posted on Sep 06, 2008

  • 69 Answers

SOURCE: Jeep88

try making sure all the grounds are good

Posted on Oct 06, 2008

  • 1 Answer

SOURCE: 03 grand cherokee

I had a similar problem... it was fixed by changing out the flasher. Part No. 4686094... about $47...
Good Luck

Posted on Nov 13, 2008

  • 131 Answers

SOURCE: Left flasher dead, right on works

double check your bulbs again, if still good
check your flasher

G

Posted on May 10, 2009

catbob007
  • 70 Answers

SOURCE: !998 jeep Cherokee-no reverse lights...left turn signal

Replace turn signal switch on colum probubly emergrncy and turn combo check your back up switch on man transmission. if auto transmission check selector switch on linkage.

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen


When the turn signals quit working pull up , down , front to back an back to front on the turn signal switch handle . Do they work when doing this ? Pontiac had bad switch . The power for the turn signals goes through the flasher / hazard module . Could be the switch or the module.
The HAZARD LPS fuse in the left hand instrument panel (LH IP) junction block supplies battery positive voltage to the flasher module, which is part of the hazard switch assembly. The TURN LPS fuse in the LH IP junction block supplies ignition positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.

Mar 12, 2016 | 2001 Pontiac Grand Am GT

2 Answers

1997 Dodge Neon left signal lights work great. Right side blinks very fast.


Has the car been in a fender bender ? check for wiring going to the front and rear lights to see if on has rubbed into a ground wire or the body. ( even if there has been no accident.)

Apr 18, 2013 | 1997 Dodge Neon

1 Answer

Hazzard lights flash when you turn the left hand signal on


You will need to replace the turn signal switch assmbly, it is defective, nothing else causes this problem.

Jan 24, 2012 | 2003 GMC Sierra

1 Answer

My left hand turn signal works sometimes and sometimes it don't but when i turn the flashers on they blink but the turn signal doesn't. the right one works


check the bulb and socket it may have worked loose. if this id not it the turn signal assembly may be bad and need replaced. hope this helps

Jan 28, 2011 | 1999 Jeep Grand Cherokee

1 Answer

2004 ford f250 xlt dual cab 7.3 4wd diesel turn indicators not working left hand side hazzard lights working. all visible fuse ok as are the relays


I would suspect the turn signal switch, turn the left turn signals on and grab the knob for the hazard switch and tug and push on it, if they start to work, the turn signal switch is bad.

Nov 19, 2010 | Ford F-250 Cars & Trucks

1 Answer

Left turn signal works / don't work, brake light


possibly flasher unit faulty
or turn signal switch

Feb 22, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Left turn signal doesn't work some times.


signal switch replacement is a common issue, i've replaced 5 so far.

Sep 22, 2009 | 1996 Chevrolet Blazer

2 Answers

The turn signals on my 2002 alero work only sometimes


All this runs though the hazzard button in the dash. The light in it gets hot and eventually shorts the system. It is fairly easy to replace if you have small hands. I think the new button is around $20. This happened to my alero and also my moms alero. Solved the problem on both.

Sep 17, 2009 | 2002 Oldsmobile Alero

2 Answers

Turn signals not working...put on right signal and left goes off


hi there , there must be a fried wire in the relay box were the two relays are for the turn signals. or a bad relays and the other acts for both . hope this could help ya.

Jan 05, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...