Question about Cars & Trucks
Can you give more details leading up to problem, such as how vehicle was running when it last started and ran, and any previous symptoms before no start? Engine size as well please.
Posted on Jan 16, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
All you need is a long prubar (or you can rent a tensioner wrench at the parts store) essentially a open end wrench with a 3 ft handle.
Put the tensioner wrench on the nub of the tensioner and pull back... this will release the tension on the old belt. Remove it from one of the pulleys, and then from the entire system.
Note how it is routed through the pulleys, and put the new one on the same way.
The car should have a sticker on the radiator support telling you the path of the belt.
Posted on Jan 08, 2009
I've had a 1990 Acclaim, a 1990 Shadow, and a 1998 Breeze, all have a head gasket leak. The Breeze was the only one to have oil leak and it was on the rear of the engine. I'd guess that's your problem.
Posted on Jan 11, 2010
SOURCE: plymouth breeze
Yes, I had this on my 97 Stratus....could be a couple of things....one, the there may be damage to the wire connector harness going to that sensor. That was the problem with mine. I replaced the cam sensor, crank sensor, coil pack, mas sensor..etc...it ended up being a burnt spot on the wire harness. They said this is a common problem for the stratus/breeze/cirrus/intrepid.....the most it could be is a bad ECM....there is a bad pin on it located half way down the side where the big connector is. It is the silver block with the big wire harness going to it in the engine compartment. Try wiggling that around...the harness area.
Posted on Jan 19, 2010
Testimonial: "thnk u for the quick response, this is very help ful. it gives me confidence in what i thought "
Tips for a great answer:
Jan 11, 2015 | 1999 Plymouth Breeze
Oct 07, 2014 | 1998 Plymouth Breeze
Jul 08, 2012 | 1998 Plymouth Breeze
Sep 13, 2011 | 1996 Plymouth Breeze
Jun 28, 2011 | Plymouth Breeze Cars & Trucks
Apr 20, 2011 | 1998 Plymouth Breeze
Dec 26, 2009 | 1996 Plymouth Breeze
108 people viewed this question
Usually answered in minutes!