Question about 1999 Dodge Durango

2 Answers

2000 dodge durango

Replaced the blower motor but now i do not have heat on the driver side, what did i do wrong?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Got a 2001 durango done replaced thermostat and the ect sensor my fron heater blows hot soon as i turn it on then it changes to warm air could it be the blend door actuator or the door itself

Posted on Feb 09, 2013

  • channing547
    channing547 Feb 09, 2013

    got a 2001 durango done replaced thermostat and the ect sensor my fron heater blows hot soon as i turn it on then it changes to warm air could it be the blend door actuator or the door itself

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

I assume this truck has daul zone heating and a/c, the air blows but is not hot? if this is the case then you may have dissconnected the blend door actuator or it just went bad. this is common that the actuator goes bad,
there are two seperate actuators that control the hot/cold door in the heater box this way the passenger and driver can set there on temp.
the actuator for the drivers side is locted on the drivers side under the dash on heater box, the blower is on the passenger side , you can check connections but i do not think it is that but rather the actuator.

Posted on Jan 16, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

dgjtex
  • 405 Answers

SOURCE: No power to blower motor resistor

Bad ground is only solution !

Posted on Dec 29, 2008

  • 66 Answers

SOURCE: replace thermostat in 2000 durango

If you look down on the radiator, on the left side, there is a larrge hose coming out of the radiator toward the engine. Where the hose ends there is a housing with 2 bolts. The Thermostat is found under that. Remove the 2 bolts an replace the thermostat. Unles your arms are very long and thin, you will probably need to do this from under the car.
Perfect time to flush/fill all coolant. Check and replace any needed hoses/clamps.

Posted on May 05, 2009

  • 145 Answers

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Posted on Jun 08, 2009

  • 82 Answers

SOURCE: 2000 dodge durango driver side window problem

durangos have many problems with the windows motors and regulators, I know for personal experience , because I have one, ...when you try rolling the windows down do you hear any noise coming from inside the door..if so.. the cable is busted ..you will need the windows regulator, if no, is probably the motor..you will have to check for power and ground right at the motor connector...if power and ground are present, then you need a motor ....in mine ,I pull the motor and cleaned , and they have been fine for more than a year, I starter with one and them had to do the same to all of them..hope this help

Posted on Aug 02, 2009

roniecon
  • 6826 Answers

SOURCE: My 2001 dodge durango - blower does not work on high

Yes there is a high blower motor relay just for that speed.It may be mounted near the blower motor,behind the glove box,or under the hood.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 durango blower


The blower motor is located under the passenger side of the dash. there should be power on the dark green wire at the blower motor. If there is no power check the 40 amp blower fuse and the blower relay. If there is power than ground the light green with white wire with the blower motor plugged in. If the blower does not come on than the blower is bad. If the blower comes on than you have a ground issue. The system is ground side controlled which means the switch provides ground. If the blower does not work on high I would suspect the ground wire is burnt on the backside of the switch since high speed bypasses the resistor.

Apr 30, 2013 | 2000 Dodge Durango

1 Answer

Locate and replace blower motor for a 2000 dodge durango


under passenger side dash may have to take cover off to get to it

Sep 06, 2010 | 2000 Dodge Durango

1 Answer

How do I replace the blower motoer on a 2000 godge durango?


The blower motor is located behind the glove comparment and can be accessed from under the passenger's side dash. Two hex blots need to be removed from the credit card sized blower and the wiring harness disconnected. You will then have to wiggle it out and replace with a new one. Thanks for using Fixya.

Aug 19, 2010 | 2000 Dodge Durango

2 Answers

Need to find where the blower resistor on a 2000 durango is


It is located very near the blower motor,the blower motor keeps it cool,it has multi wires going to the connector on the blower resister,and mounts on the blower box,but actually goes inside the blower box

Jul 07, 2010 | 2000 Dodge Durango

1 Answer

Blower motor quit 2000 Dodge Durango


remove right front door sill trim panel.and remove the right side interior cowl trim cover.you should see blower motor.

Dec 10, 2009 | 2000 Dodge Durango

6 Answers

Replace durango blower motor resistor instructions


2003 Dodge durango, the blower motor stoppped came back on and stopped again and never came back on. I replaced the blower motor and still no air. Can anyone help?

Aug 01, 2008 | 2001 Dodge Durango

1 Answer

1999 dodge durango fan motor replacement


  1. Remove right side scuff plate.
  2. Pull back carpet.
  3. Disconnect blower motor wiring connector.
  4. Remove blower motor retaining screws, and lower blower motor assembly from unit housing.

Jun 27, 2008 | 1999 Dodge Durango

2 Answers

2002 Dodge Durango


blower motor resistor maybe why it only blows on high

Jun 25, 2008 | 2002 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...