Question about Cars & Trucks

1 Answer

Where are the headlight relays 1998 chrysler sebring?

Headlights dont work or high beams check all fuse's and the relay in the fuse box. Replaced the headlight switch. Is there another relay I dont know about?

Posted by on

  • 3 more comments 
  • ricbls1516
    ricbls1516 Jan 16, 2013

    I pulled the leed off all the headlight no power going to headlights. I checked the groung wire to headlights there is a good groung on all headlights

  • Leigh Perlmutter
    Leigh Perlmutter Jan 16, 2013

    If you are really sure you checked all the fuses and relays in the fusebox and pushed them in securely, then the last thing is the actual light switch in the car is defective or there is a wire off of it!

  • ricbls1516
    ricbls1516 Jan 16, 2013

    I replaced the headlight switch/turn signal. Is there another relay besides the one in the fuse box, I have pulled the fuses and relays 2-3 times all good

  • Leigh Perlmutter
    Leigh Perlmutter Jan 17, 2013

    Try a substitution of a similar relay from the fuse box in the headlight relay slot!

  • ricbls1516
    ricbls1516 Jan 17, 2013

    Thanks for your help, I have swaped out the relay w/another a few times. I have pulled the fues out and swaped them and checked them all good, no power to lights. I can feel the parking lights relay kick on but the headlights relay does not kick on. I have replaced the headlight/turn swich w/new still no lights the ground to the lights are good no power at light bulb. Is there another relay for the headlights someware that I dont know about?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,669 Answers

Check in that fuse box again. There is one for each, the high beam and the low beam.

Posted on Jan 16, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: Headlight 2004 camry

your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Posted on Sep 01, 2008

  • 58 Answers

SOURCE: 2003 Seville STS low beam headlights don't work

ya its is prolly the bulbs, open your hood. look behind your headlamps, some have covers for the low beam and high beam. if there are covers turn on your high beams so you will know which bulb is your lowbeam. if you can unplug them. after cover is removed and you can acces the bulbs. they either twist out, lefty lossey. or they have little metal retainers that you have to move a certian way before you can swing the retainer out. its like a door you just have to unhook the proper side of retainer and the other side will be hinged. use a flash light and look at it close. good luck

Posted on Jan 29, 2009

  • 23 Answers

SOURCE: camry headlights not working

Have you checked out the switch itself? Seems like the problem might be there.
If the lamp bulbs are sill intact, that's probably the most likely solution. There's a possibility you have a short somewhere in the switch relay that will allow the highlights to turn on but not the low beams.

Posted on Mar 25, 2010

  • 693 Answers

SOURCE: 1998 buick century only high beams and turn

The Buick Century is equipped with a multi-switch. This switch is an all in one switch that controls your cruise control, windshield wipers and turn signals in one switch. This switch also controls dimming and brightening of your headlights. The dimmer switch is simple to replace, and all you need is a phillips head screwdriver to complete the task.

  1. Removing the Steering Column Shroud
    • Removing the dimmer switch starts at the steering column. To plan this task out, access the steering column by removing the screws holding the steering column shroud in place. This will expose the turn signal lever. Remove the lever by twisting it forward, and pulling it out of the switch.
    Removing the Dimmer Switch
    • The switch is held on by two screws and a wiring harness. The wiring harness can be removed by prying up on the locking tabs and pulling the connector out of the socket. The two screws can be removed with a phillips head screwdriver. The switch will slide out. To install a dimmer switch, be sure to repeat these steps in reverse order.

Posted on Oct 09, 2011

  • 3 Answers

SOURCE: daytime running lights work but go out when I turn

If you have daytime running lights but when you turn on your regular headlight on they do not come on. Take the bottom of your steering column off (Two Small Screws) and look at the back of your turn/dimmer switch make sure that the light blue wire is connected. The wires will break off after years of raising and lowering your steering column.

Posted on Dec 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had problem with headlights coming on by themselves - found fault due to water in Fuse Box in engine compartment.


Check the high beam relay. Swap with like relay in the fuse box. Also check the fuse.

Apr 14, 2016 | 2006 Fiat Grande Punto

2 Answers

Why my headlights high beam is out on one side low beam out on other side?


check your head light relay and some models use a lighting control module LCM

Nov 08, 2014 | Chrysler Voyager Cars & Trucks

1 Answer

99 GMC Jimmy DRL, headlights, and High beams not working amber lights work.


headlights control by headlamp driver module relay to the BCM and the light sensor on dash next to the winshield defrost vents.headlights also control by high beam relay.

Nov 18, 2013 | 1999 GMC Jimmy

1 Answer

Trying to find the headlight relay on my 2004 chryler sebring


There is a relay in the fuse box in the engine compartment, but it would handle both high and low beams. So I would guess the problem is in the dimmer switch.

Oct 14, 2012 | 2004 Chrysler Sebring

1 Answer

2005 chrysler sebring convertible~ low beams not working, but all other lights do~ checked fuses and they llok fine...any ideas?


, try using a voltmeter on the plug for the bad headlights Turn on the ignition, and turn the headlight switch. If the voltmeter shows no voltage, then either your switch or the wiring leading to the headlight has gone bad.If replacing your headlight switch does not solve the problem, then there is a break in the wiring leading to the headlight, and the wiring will need to be replaced. also check to see if you have a relay for the low beams in fuse and relay box, check this first !

Jan 24, 2012 | 2005 Chrysler Sebring Conv

1 Answer

Hello, The low beam on the headlights of my 1998 Chrysler Sebring do not work but the high beams do. Is the problem a bulb or fuse and how do I replace the part?


it is most likely a blown fuse as the HIGH & LOW beam lights may have separate fuses, check the fuses in the fuse box under the hood or under the dash...... hope this helps......cheers.

Sep 22, 2011 | 1998 Chrysler Sebring

4 Answers

Both Low beam headlights aren't working in my 2002


my suggestion is that you check/ replacr the HDM(headlight driver module) relay in the main fuse box located under the hood near the battery.

Jul 30, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Headlights-burnt-out-replaced-fuses-&-ew-uls-oth-still-not-workig-what-else-could-it-e-


Not completely sure your problem. Are you low beams out and your high beams still work? If so, switch relay #46 with relay #45 in the fuse box under the hood. Do your lights now come on? If so, replace the low beam relay.

Dec 06, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Headlights went out. Replaced bulbs and switch and still lights don't work. Fog lights and high beams work? What else can work?


If high beams work and low beams do not, then it is probably the high/low relay. It is part number 15016745 and has four prongs. To test if your relay has gone bad locate the relay in your fuse box. There will be two of these relays located next to each other. One controls the low beam headlights and the other the cooling fan. Swap the relays and check your low beam headlights. If the low beams work you have a bad relay.

Sep 20, 2010 | 2006 GMC Envoy

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...