Question about 2000 Lexus RX 300
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check out the Homelink Website. I found instructions for my wife's GS300 there. I haven't tried it yet, so I'm not 100% sure this will work.
Posted on Jul 13, 2008
P1130 Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction (Bank 1 Sensor 1)
This sensor is the hardest to get at. It is between the cat and the cylinder block on the bank of cylinders closest to the firewall. Not much wiggle room back there.
Sensor will run you about $225 from Toyota, $275 from Lexus, but you may be able to get a Denso sensor on line.
Good luck and hope this helps. keep me posted.
Posted on Jun 26, 2009
This is a lenghty job!! You would have to remove the plastic engine cover to locate the plugs (cover that has the lexus symbol). There are 3 coils(black squarish units) on the front head and another three in the rear head. You must remove these to access the sprakplugs. Front is very easy!! The rear is difficult, you would have to remove the intake(special tools are needed) to access the rear coils and sparkplugs. hopefully this helps
Posted on Jul 24, 2009
coolant temp sensor is located on the bootom backside of the radiator. you will have to remove the front under cover to access it.
Posted on Oct 09, 2009
Try to find your solution here, from Germany Lexus Owners:
I justreplaced my door lock actuator on my 2003 Lexus RX300. A rather comprehensive set of instructions for removal of the door panel can be found at: clublexus.com door+panel+removal
To remove the door handle trim: after removing the screw in the door handle trim, pry (I use a painters 5 in 1 tool) the trim piece outwardsfrom the rear of the door panel at both the top and bottom of the trim piece. This will release the two small rear clips. Then push the trim forward to release the main clip located on the back side the handle trim piece
As the least expensive OEM replacement door lock actuator for Lexus RX300 is $230 or more, I opted for the $15 replacement option as outlined below: us.lexusownersclub.com/forums
Keep in mind that this job outlined above is a bit on the technical side.If you aren't that talented, spend the money and order a OEM Lexus replacement latch actuator and do the installation as the OEM latch assembly is not repairable.
Viel Gluck (good luck in German)
I hope helps with this. Good luck.
Posted on Dec 29, 2009
Tips for a great answer:
Aug 27, 2016 | 1999 Lexus RX 300
Apr 10, 2014 | 2000 Lexus RX 300
Jan 25, 2010 | 2000 Lexus RX 300
Nov 29, 2009 | 2000 Lexus RX 300
Oct 07, 2009 | 2000 Lexus RX 300
Sep 12, 2009 | 2000 Lexus RX 300
Jul 17, 2009 | 2000 Lexus RX 300
Jun 09, 2009 | 2000 Lexus RX 300
May 23, 2009 | 2000 Lexus RX 300
Apr 20, 2009 | 2004 Lexus RX 330
80 people viewed this question
Usually answered in minutes!