Question about 2001 Chrysler Sebring

1 Answer

3.0 it is firing getting fuel and ijector pulse timingis correct but will not start

Posted by on

  • Hugh Bradley Jan 18, 2013

    IT WAS BAD DISTRIBUTOR

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 975 Answers

Spark,fuel and compression is all you need,but..
Has to have like 50 lbs of fuel pressure,need to check the
pressure. Also have someone crank it and put your hand over the
tailpipe,should be able to feel exhaust coming out.
If the exhaust (catalitic converter) is plugged is will keep it from running.

Posted on Jan 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is an ijector malfunction no 7


The number 7 cylinder fuel injector is not operating as designed. Check for power and injector pulse on the injector, if circuit is good suspect a bad fuel injector.

Feb 16, 2015 | 2002 Dodge Dakota Club Cab

1 Answer

I changed engines from a 1996 chevy cavalier to a 1997 cavalier,i don't get any gas or fire won't start


These cars were made with an anti theft security system. If you swapped motors, you may have interupted that system causing the the security to turn off the ijector fuel. Just a thought.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 08, 2011 | 1997 Chevrolet Cavalier

1 Answer

FIVE THOUSAND DOLLARS to fix fuel leakin from my injectors into my motor I THINK GM shoud be paying for this mistake


fuel injectors operate on a pulse from the computor. remove the fuel rail and insect the suspect injector 2 things will cause the injector to dump fuel.ethier the injctor has come apart at the end or the ijector is stuck open.hope that helps. you might be able to turn key on with
fuel and elect connentions to see which one is leaking

Feb 16, 2011 | GMC G2500 Cars & Trucks

2 Answers

What part make the ijectors work. The computer, any sensor or relay


The ECM controls the injectors, the injectors should have 12 volt constant and the ECM controls the negative side and pulses the negative current to control the length of the injection pulse.

Thank you for using fixya and keep us posted

Oct 10, 2010 | 1993 Chevrolet Astro

2 Answers

My 2001 pontiac grand am all of a sudden quit running.went to start it wont start.changed spark plugs nothing.took off main fuel line right at fuel rail turned key gets plenty of gas.put carb cleaner in...


It depends on the # 1 ijector to fire then the rest follow,i u have test for injectors teat the 3 1 TO SEE WORKING PROPERLY,WHAT ELSE SOMETIMES ON GRANDAMS THE INGNITION SWITCH GOES OUT....

Aug 23, 2010 | 2001 Pontiac Grand Am SE

1 Answer

I have a 2001 camaro with a 3800 v6 it cranks but wont start. no feul and the injectors are not firing. i can jump the feul pump relay and get feul pressure but the injectors will not fire.


The crank sensor is what pulses the ijectors,and makes the spark,so I would start at the crank sensor.Let me know how you come out.Check for any blown fuses also.Ecm fuse would cause this,but it may be called anything ,so check all fuses.

Sep 10, 2009 | 2001 Chevrolet Camaro

1 Answer

Fuel in line but wont start and if i pour fuel in the in take it starts


if u have fuel pressure then ijectors are not pulsing this is probley the crank sensor

Jun 30, 2009 | 1999 Chevrolet Blazer

1 Answer

Will not start,(but engine rotates)


make sure fuel is going to engine from injectors, you can try by adding carburetor cleaner to intake and crak it, if it runs for a little be then ijectors are not firing, some times the ignition module to control the spark will keep the injectors from firing

May 28, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
2001 Chrysler Sebring Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...