Question about 2003 Chevrolet Tahoe

1 Answer

I want to clear the error message "service ride control" from the driver display

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 21,873 Answers

Have you scanned the body computer for trouble codes and made the necessary repairs ?

Posted on Jan 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clear a service emissions message on a 2005 Mercury Mariner with a 3.0L engine. I have performed the required maintenance procedures at both 30,9000090's and 60,000miles. Still have message.


Warning Messages The warning messages can interrupt the display until cleared or reset by the driver. The warning messages are either single cycle, non-resettable, or repetitive warning messages.
The single cycle warning messages display once whenever the ignition switch is turned to the ON position or a fault occurs in a system, and can be cleared by pressing the RESET button. The single cycle warning messages are:
  • liftgate ajar
  • liftgate glass ajar
  • service emission system
  • low brake fluid
  • service brake system
  • check left headlamp
  • check right headlamp
  • check left turn lamps
  • check right turn lamps
  • check left high beam
  • check right high beam
  • check brake lamps
  • check parking lamps
  • washer fluid low
  • check fuel cap
  • change oil soon
  • change oil now
  • low fuel
  • service 4x4
  • turn signal on

Jun 15, 2016 | Mercury Cars & Trucks

1 Answer

Says service ride control on dash


Air ride suspension error fix or reset Service Ride Control ...

? 3:37
https://www.youtube.com/watch?v=PVTeX3eku0E
Mar 18, 2014 - Uploaded by Justin Smith
You may receive Service Ride Control on your GM or Cadillac vehicle. ... and to clear or Reset the Service ...

Overriding The Service Ride Control Light On A Chevrolet ...

? 3:25
https://www.youtube.com/watch?v=IepZ4dnkXvg
Mar 8, 2013 - Uploaded by Strutmasters LLC
This video at (http://www.strutmasters.com) shows how to override the "Service Ride Control" light on a ...

Speed Sensitive Suspension and the "SERVICE RIDE CONTROL" message ...

www.cadillacforums.com > ... > Suspension, Brakes and Tires

Dec 5, 2003 - 15 posts - ‎8 authors
"SERVICE RIDE CONTROL" message is on the dash. Took car to the local Cadillac dealer and was told it would be one hour labor to diagnose; ... service ride control?
12 posts
Apr 21, 2009
Bypassing Service Ride Control?
9 posts
Feb 18, 2009
Service ride control? - seville 96
15 posts
Jul 22, 2006
95 deville service ride control
4 posts
Aug 2, 2003
More results from www.cadillacforums.com

Jan 11, 2016 | Cars & Trucks

1 Answer

What is an average cost to service the Stabilitrak System in a 2002 Cadillac Escalde


If the system fails to turn on or activate, the StabiliTrak light along with one of the following messages will be displayed on the Driver Information Center (DIC): TRACTION CONTROL OFF, SERVICE TRACTION CONTROL, STABILITRAK OFF, SERVICE STABILITRAK. If these DIC messages appear, make sure the StabiliTrak system has not been turned off using the StabiliTrak on/off button. Then turn the steering wheel clockwise from the nine o'clock position to the three o'clock position. If this clears the message(s), the vehicle does not need servicing. If this does not clear the message(s), then turn the vehicle off, wait 15 seconds, and then turn it back on again to reset the system. If any of these messages still appear on the DIC, the vehicle should be taken in for service.

Mar 17, 2013 | Cars & Trucks

1 Answer

What does the message "service ride control" mean?


This message is alerting the driver of a suspension problem. These cars have active shock absorbers that react to road surface by electronic sensors in the shocks.This system is complex and requires the assistance of a trained mechanic. Bring your vehicle to a mechanic shop to have it checked. hope this helps

Dec 22, 2010 | 1993 Cadillac Eldorado

2 Answers

What does it mean when the dashboard reads gear indicator fault, service ride control and change oil soon even after i just got it changed along with service vehicle thats what keeps popping up on my dash...


Off the top of my head the following may be the case for your 1995 Cadillac Deville based on my 1997 Cadillac Deville knowledge:

gear indicator fault- has to do with the shift lever sensor down on the column by the feet,

service ride control- has to do with the air ride shocks in the back or the compressor in the front or the ride control height,

change oil soon- has to do with not resetting the % oil life (just press reset button for a few seconds when the oil % life is displayed)

Hope this helps you out.

Aug 29, 2010 | 1995 Cadillac DeVille

1 Answer

The lite says sevices road controal


U mean "service ride control" is being displayed on the digital part of the dash cluster. It means one or both of your front struts or rear shocks could be bad. Just keep hitting that info button to clear the message until u can afford to take a $800 hit for just one. But u never know, u could get lucky and it may just b a wire(not likely).

Feb 24, 2010 | 1994 Cadillac Eldorado

1 Answer

REPLACED DRYER ON 96 CONT NOW THE BACK WONT AIR UP FRONT DOES


maybe you got dirt in the line to the rear. Here's some background info:

The air suspension system includes the following major components:
  • Air compressor to supply air to the air springs (part of front spring and shock and rear spring and shock absorber assemblies
  • Front spring and shock (3C098) and rear spring and shock absorber (5A965) at each corner of the vehicle
  • Four linear air suspension height sensors (5359): two rear and two front height sensors to maintain the vehicle at the proper ride height; only LH rear height sensor is used for air suspension.
  • Dual-mode front spring and shock and rear shock absorber assemblies with internal actuator.
All system functions are controlled by vehicle dynamics control module (5A919). This control module receives inputs from several different sources. These inputs include:
  • vehicle speed via multiplex communication network
  • ignition switch position
  • door position via multiplex communication network
  • height sensor position
  • air suspension service switch
  • engine rpm via multiplex communication network
  • ride and steering personality settings via multiplex communications network
Communications monitor system operation and allow diagnosis of any concerns that may develop in the system.
  • System monitoring for the driver's use is provided through the instrument panel mounted message center indicator (10D898).
  • Diagnosis communication for the service technician is provided through the data link connector (14489) (DLC) under the instrument panel and Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent.
The message center indicator will display AIR LEVELING DISABLED or CHECK RIDE CONTROL if the suspension system is not turned on or the vehicle dynamics control module detects a concern. If air leveling system disabled is displayed, check that air suspension service switch is in the ON position.
-------------------------------------------------------
Weight Added When weight is added to the vehicle, the air suspension system responds as follows:
  • Air suspension height sensor length is reduced from trim length, sending a "vehicle is low" signal to the vehicle dynamics control module (5A919).
  • To restore vehicle to the trim position, the vehicle dynamics control module turns the compressor on by grounding the compressor relay control Circuit 420 (DB/Y). The relay is ground-side switched.
  • To allow pressurized air to enter the rear spring (5560) and front spring and shock (3C098), the control module opens the solenoid valves (5311).
  • Compressed air flows from the compressor, through the compressor air drier assembly, air lines and solenoid valves into the air springs.
  • As the air springs raise the body height, the air suspension height sensor (5359) increases in length until the preset trim height is reached.
  • The vehicle dynamics control module then turns off the compressor (through the relay) and closes the air spring solenoid valves.
  • ----------------------------------------------------------------------------
  • Weight Removed When weight is removed, the air suspension system responds as follows:
    • Air suspension height sensor length is increased from the trim length, sending a "vehicle is high" signal to the control module (5A919).
    • To restore the vehicle to the trim position, the vehicle dynamics control module opens the vent solenoid valve (located in the compressor assembly) and opens the solenoid valves (5311).
    • Compressed air flows from air springs, through the solenoid valves, air lines, compressor air drier (5346) and out the vent solenoid valve.
    • As the body lowers, the air suspension height sensor length decreases until the preset trim height is reached.
    • The vehicle dynamics control module then closes the vent and solenoid valves.
------------------------------------------------------------------------------
Control Module Power and Ground The vehicle dynamics control module (5A919) is located above the upper luggage compartment trim panel and lower module tray. Module power is provided by Circuit 418 (DG/Y) at Pins 36, 37, 56, 57, 58 and is powered through a Fuse 7 (30A) in power distribution box. Module ground is provided through control module wire harness Pins 6, 39, 40 and 60. The data link connector (14489) (DLC) is located in the passenger compartment under the instrument panel, 300 mm (12 inches) right of the steering column. This connector allows communications between the vehicle dynamics control module and either Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent or Rotunda Service Bay Diagnostics System (SBDS)® 001-00001 or equivalent. When the CHECK RIDE CONTROL message is displayed in the message center indicator (10D898), a system error has been detected by the vehicle dynamics control module and is stored in the control module. This diagnostic trouble code (DTC) will be retained for the next 80 ignition switch cycles. If there is no repeat of the same error during these 80 ignition switch cycles, the control module will erase the DTC. Because of this self-erasing memory, a customer may have had a concern "just a few days ago" that is not retrieved from memory when Diagnostic Test Mode (DTC) "Retrieve/Clear Continuous DTCs" is executed. This must be kept in mind if you must tell customer that no current concern has been found. When the vehicle dynamics control module detects a concern, the air suspension system is disabled for the current ignition cycle. If the condition causing the concern clears up during the current ignition switch cycle, the system will not reactivate. For example, if the customer has severely overloaded the luggage compartment, the system will not be able to trim the vehicle without exceeding the compressor run time. This will generate a DTC that disables the computer controlled suspension system. If the customer then drives the vehicle and unloads the luggage compartment without turning the ignition switch OFF, the system will not adjust for the new load. The customer will experience poor ride quality and the vehicle will not adjust trim.

May 20, 2009 | 1996 Lincoln Continental

1 Answer

SERVICE DRIVER CONTROL ????????


I guess the right word is . Service ride control.
Service ride control. come because, Is there a computer for all the suspension and esteering.
Level sensor if the car use air suspension.
Or electronic shocks. any of those are giving the message.
You need to do a computer diagnostic. On a repair shop.

Jun 29, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...