Question about 2004 Ford Expedition

Open Question

How to install replace blower fan motor for 2004 Ford Expedition

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: 2000 ford explorer fan blower only works intermittently

On ford vehicles the blower motor resistors are the most common problem when this happens.

Posted on Dec 21, 2008

chuck943
  • 783 Answers

SOURCE: 2006 Ford Explorer XLT the Blower Fan only works on 4 and 3 Sp

Look under the dash on passenger side and just to the left of the blower motor housing you will see the 4WD control module.Remove the 2 screws holding the module and let it hang down and your resistors are behind this.Remove the 2 screws holding the resistors and remove.
Now I am assuming you have manual climate control and not electonic.

Posted on Feb 26, 2009

c17hydro
  • 2984 Answers

SOURCE: Looking for a free online repair manual for 2004 Ford Expedition

Pretty simple actually. Sounds retarded but here ya go:

Unscrew all the screws visible. This includes the armrest if applicable.

Get a tool from your local auto parts store that looks like a small pry bar that has a little slot in the middle. it almost looks like the weed puller you use to remove dandelions. Seriously...you'll know it when you see it. This thing is a gem and works on ALL door panels. Slip it inbetween the door panel and the metal part of the door and start popping out the panel. You really want to get behind the plastic fastners if you can. Once you get to panel loose, you want to detach any electrical connectors from the door panel switches.

After that, use a little force to work it upwards to clear the door itself. the seal that is butted up against the glass is sometimes tight.

Do what you need to do and installation is in reverse order.

By the way, that tool is less than $10.00!

Good luck and post if you have any problems.

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: My blower motor fan speed switch will work only on High.

I had a similar problem with my 03 Taurus. Does your floorboard on the passenger side get wet when it rains really hard? If so, Ford is aware of a defect above the fan motor which is behind the glovebox.
I contacted Ford directly and they had my local ford dealer fix it free and they gave me money towards a new blower motor which shorted out from the leak, it's possible it just your switch if there is no leak but you might need both the switch and blower motor replaced like I did. Hope this helps.

Posted on Apr 14, 2009

  • 288 Answers

SOURCE: 1998 Ford Expedition, 5.4, 4x4 with Air Cond. Blower Motor fan.

check the resistor first .

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 merury villager estate and the heater fan isn't working. Heat works fine but the fan won't come on. What do i need to do to fix it?


Charlie, 1st thing is to check your fuses. I will post some links to help you see and solve problem. May not be your exact model but steps are basically the same.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Heater AC Fan Speed Resistor Ford Taurus Mercury...

How To Install Replace Heater AC Blower Fan Motor 2004 08 Ford F150


How To Install Replace Heater AC Blower Fan Motor 2000 07 Ford Focus


Feb 27, 2016 | Cars & Trucks

1 Answer

Eddie Bauer Edition. how can I replace heater fan motor?


How To Install Replace Blower Motor Heater AC Fan Ford ...

? 9:30
https://www.youtube.com/watch?v=zasspzTCrSo
Oct 4, 2010 - Uploaded by 1A Auto Parts
How To Install Replace Blower Motor Heater AC Fan Ford Explorer ... This procedure should be the same or similar on 95, 96, 97, 98, 99, 00, ...

Nov 25, 2015 | 1997 Ford Expedition

1 Answer

My 2004 Expedition EB front blower motor quit working for a week, then started to work again but works once in awhile. Is it the motor or the resistor?


First thing I would check is the relay in the fuse panel for the blower motor R06.

See page 252 for the diagram with the location of the relay.

2004 Ford Expedition

It may be the motor starting to go also. There is no need to worry about the resistor. The resistor would only be bad if the motor only opereated on one speed, normally high. The resistor does just that it causes resistance in the blower circut to reduce the speed from high.

Hope this helps.

Zeppelinx12

Mar 05, 2011 | 2004 Ford Expedition

1 Answer

1998 Ford Expedition Fan Blower Resistor Location


It should be located on the blower motor housing under the right side of the dash, it will have wiring connector and 2 screws holding it in.

Jan 09, 2010 | 1998 Ford Expedition

1 Answer

2004 expedition when a turn on the AC the vents in the front don't blow any air


sounds like the front blower motor is bad on the passenger side under the dash. remove the panel under dash and you will see the blower motor housing and blower motor. check the plug in on the bottom of motor if it is plugged up and not working pull the motor out by removing the screws around motor and dropping out hook directly to battery and see if it works if it does it is a fuse or relay.

Aug 31, 2009 | 2004 Ford Expedition

1 Answer

Fan blower making rubbing noise '04 Expedition


SEE IF YOU CAN BLOW SOME COMPRESSED AIR INTO THE FAN UP UNDER THE DASH..SOMETIMES PAPER OR TRASH CAN GET IN THERE..ITS EASY AND FREE TO TRY BEFORE A MECHANIC TRIES TO SELL YOU SOMETHING YOU DONT NEED

Jul 07, 2009 | 2004 Ford Expedition

1 Answer

2004 Expedition blower noise


the squirrel cage is probably loose on the blower motor shaft.

here's 2003, don't have 04.

SECTION 412-02: Heating and Ventilation 2003 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Blower Motor Removal and Installation
  1. Remove the RH lower instrument panel insulator.
  1. Remove the RH scuff plate.
  1. Position the carpet aside.
  1. Remove the blower motor.
    1. Disconnect the electrical connector.
    1. Remove the screws.
    1. Remove the blower motor.

May 22, 2009 | 2003 Ford Expedition

Not finding what you are looking for?
2004 Ford Expedition Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...