Question about 2001 Pontiac Grand Am SE

Open Question

How to remove headliner in grand am - 2001 Pontiac Grand Am SE

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
iadame
  • 676 Answers

SOURCE: how do i remove dome light's from 1992 pontiac

You will need to take the plastic cover off the dome light. You will find screws that will need to be removed. Once removed dome light should come down. Disconnect wires.

Posted on Oct 09, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to install replacement sunroof motor on a 1999 Pontiac grand prix


Important: This sunroof system is timed from the factory in order to allow the actuator to shut off automatically when the sunroof window reaches a certain position. Use extreme care when removing the actuator from the sunroof module. This may cause the timing to be thrown off. This may damage to the sunroof. Anytime the actuator needs to be removed from the module, ensure that the sunroof window is in the fully closed position.
Remove the sunroof window. Refer to Sunroof Glass Panel Replacement .
Slide the sunshade fully rearward. Move the sunroof window to the vent position. Remove the sunroof screws (two on each side). Remove the sunroof window from the module.
Place the sunroof module in the fully closed position. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior trim.
Tools Required ?€¢
J 38778 Door Trim Pad and Garnish Clip Remover


?€¢
J 2772-C Headliner Installer

  1. Remove the sunshades. Refer to Sunshade Replacement .
  2. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
  3. Remove the sunshade retainers. Refer to Sunshade Anchor Replacement .
  4. Remove the power sunroof switch, if equipped. Refer to Sunroof Switch Replacement in Roof.
  5. Remove the sunroof trim lace, if equipped. Refer to Sunroof Seal/Molding Replacement in Roof.
  6. Remove the dome light, if equipped.
  7. Remove the coat hooks. Refer to Coat Hook Replacement .
  8. Remove the assist handles. Assist Strap Replacement
  9. Remove the rail lamp. Refer to Roof Side Rail Lamp Replacement in Lighting.
  10. Remove the windshield side garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
  11. Remove the upper quarter trim panels. Refer to Rear Quarter Upper Trim Panel Replacement .
  12. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  13. Pull down on the door opening weatherstrip seal on both the front and the rear doors.
  14. Remove the 2 rear retainers (2) using J 38778 Door Trim Pad and Garnish Clip Remover. Disconnect the headliner electric harness at the right side of the rear window shelf. Rotate the right front seatback to a horizontal position. Remove the headliner from the vehicle through the right front door.
Disconnect the electrical connector from the actuator.
Important: Before removing the actuator, ensure that the pins J 41718 are tight and holding the cable.
Thread the J 41718 into the front sunroof window screw hole in order to retain the cable adjustment. Remove the sunroof actuator screws. Remove the sunroof actuator from the module. Did you look for a video on youtube ?

Feb 27, 2015 | 1999 Pontiac Grand Prix

Tip

How To Install Replace Rear Door Panel Mercury Grand Marquis 98-02 1AAuto.com


How To Install Replace Rear Door Panel Mercury Grand Marquis 98-02 1AAuto.com

on May 22, 2012 | 1998 Mercury Grand Marquis

Tip

How To Install Replace Side Marker Lights Mercury Grand Marquis 98-02 1AAuto.com



How To Install Replace Side Marker Lights Mercury Grand Marquis 98-02 1AAuto.com

on May 18, 2012 | 2002 Mercury Grand Marquis

1 Answer

How do i replace the sunroof track on my 2001 jeep grand cherroke limited? the bracket that the air deflector attaches to is broken.


You have to remove the headliner. Remove all the door column bezels and rear bezels, both sides. Remove the sun visors. Remove any dome lights and look for screws. Most headliners have plastic buttons and Velcro that hold them in place. Start in one place and work your way around to release the headliner. Being extremely careful. Because if you pull down to hard, you will crack the headliner, leaving a nice crease. Once the headliner is out, You can get to the sun roof regulator and motor.

Dec 01, 2014 | 2001 Jeep Grand Cherokee

1 Answer

I have 2000 gran marquis custom moonroof vent stuck open no power where is motor located?


There should be an access door on headliner.if not, you'll have to remove, lower headliner...I would start at the fuse panel and make sure the fuse is ok

Mar 13, 2014 | 2000 Mercury Grand Marquis

1 Answer

How do i remove dome light's from 1992 pontiac grand am so i take headliner down and replace it with new headliner


You will need to take the plastic cover off the dome light. You will find screws that will need to be removed. Once removed dome light should come down. Disconnect wires.

Oct 09, 2009 | 1990 Pontiac Grand Am

1 Answer

How do I remove the headliner in Pontiac Grand Am 1990


remove sun visor and all trim around the headliner and the dome light and basically pull it down

Jul 09, 2009 | 1990 Pontiac Grand Am

1 Answer

96 jeep grand cherokee headliner


you might need a set of torx or allens but as far as i know there shoulnt be any problem.

Mar 23, 2009 | 1996 Jeep Grand Cherokee

2 Answers

Remove headliner


On the Front Surface of the Handles there are small Tabs that look just like the Handle that have to be Removed to Access the Bolts.

Jan 15, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...