Question about 2004 Kia Sorento EX

Open Question

Crankshaft and connecting rod torque specs - 2004 Kia Sorento EX

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 46 Answers

SOURCE: i need to find the torque specs for the connecting

22 - 24 ft. lbs. for the rod caps and....
110795143Cylinder Head Tightening Torque and Sequence.

Tighten cylinder head bolts in order shown.
Tightening torque: 36.1 ft. lbs. (49 Nm, 5 kg-m)

Loosen bolts in reverse of order shown.

Retighten cylinder head bolts in order shown.
Tightening torque: 18 ft. lbs. (25 Nm, 2.5 kg-m)

Mark cylinder head bolts for rotational reference.
Rotate cylinder head bolts 90°(1/4 Turn) in order shown.

CAUTION:

  • Do not reuse the old cylinder head bolts.

Posted on May 31, 2010

Testimonial: "thank you so much for your help is been a nightmare getting info on this car thanks again"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much torque does my kohler k662 spec # 3966c produce at the crank?


Kohler Small Engine Connecting Rod Torques

outdoorpowerinfo.com/engine_specs/kohler_rod_torques.asp
Engine Connecting Rod Torques for Kohler small engines used on a variety of outdoor power equipment applications. ... Series, Engine Model, Engine Type, Rod Torque .....K-SERIES, K662, Air Cooled Horizontal Crankshaft Twin, 35 ft-lb.

Sep 24, 2015 | Cars & Trucks

1 Answer

What is the torque specs. 4.3 2002 Chevy vortex main and rod bearing


I didnot find specs for 2002 4.3 L. engine. I dont know if the specs for the 2004 4.3 L. would help. connecting rod first pass 20 lb ft
and final pass 70 degrees. For the crankshaft bearing cap bolts
first pass 15 lb ft and final pass 73 degrees. in the vehicule identification number , the 8 th number is the engine. the specs is the a vin X.

Mar 25, 2015 | Chevrolet Cars & Trucks

1 Answer

Crankshaft & connecting rod torque specs for a 98 jaguar xj8 4.0


crank is 105ft lb final torque connecting rod is 40 ft lb final torque. you can check on auto zone libary

Oct 15, 2014 | Cars & Trucks

2 Answers

Engine connecting rod torque specification.


contact autozone or dealer service for specs..

Feb 09, 2013 | 2005 Suzuki Forenza

1 Answer

Toque specs on a 1971 in line 6 mercury comet's rod bearings and the clearance between the bearing and crankshaft


TORQUE SPEC FOR ROD BEARING BOLTS 19 - 24 FT LBS TORQUE SPEC FOR MAIN BEARING BOLTS 60 - 70 FT LBS, CRANKSHAFT PULLEY BOLT 85 - 100 FT LBS. MAIN BEARING OIL CLEARANCE .0005 - .0022 CONNECTING ROD OIL CLEARANCE .0008 - .0015 / SHAFT END PLAY .004 - .008 / AND ROD SIDE CLEARANCE IS .004 - .011 HOPE THIS HELP THIS INFORMATION I GAVE YOU IS INLINE 6 -200 AND INLINE 6 - 250 ENGINES

Nov 11, 2011 | Cars & Trucks

2 Answers

Connecting piston rod torqe1.0 engine rod rod spec


PISTON ROD BEARING TORQUE 26 FT LBS CRANKSHAFT MAINBEARING TORQUE IS 40 FT LBS

Jan 10, 2011 | 1996 Geo Metro

1 Answer

I'm looking for the 2000 isuzu rodeo 3.2L v6 connecting rod bearings torque specs.


1. Check the connecting rod alignment If either the bend or the twist exceeds the specified limit,the connecting rod must be replaced. Bend per 100 mm (3.937 inch) Limit: 0.15 (0.0059) Twist per 100 mm (3.937 inch) Limit: 0.20 (0.0078)

2. Measure the connecting rod thrust clearance. Use a feeler gauge to measure the thrust clearance at the large end of the connecting rod If the clearance exceeds the specified limit, the connecting rod must be replaced. Standard: 0.16 mm - 0.35 mm (0.0063 inch - 0.0138 inch) Limit: 0.40 mm (0.0157 inch)

3. Measure the oil clearance between the connecting rod and the crankshaft.

    1. Remove the connecting rod cap nuts and the rod caps (12). Arrange the removed rod caps in the cylinder number order.
    2. Clean the rod bearings and the crankshaft pins.
      1. Carefully check the rod bearings. If even one bearing is found to be damaged or badly worn, the entire bearing assembly must be replaced as a set. Reinstall the bearings in their original positions. Apply plastigage to the crank pin.
      2. Reinstall the rod caps (12) to their original positions. Tighten the rod cap nuts. Torque: 54 Nm (40 ft. lbs.) Note: Do not allow the crankshaft to rotate.
      3. Remove the rod caps.
        1. Measure the width of the plastigage and determine the oil clearance. If the oil clearance exceeds the limit, replace the rod bearing as a set. Standard: 0.019 mm - 0.043 mm (0.0007 inch - 0.0017 inch) Limit: 0.08 mm (0.003 inch)
        2. Clean the plastigage from the bearings and the crankshaft pins.

May 21, 2009 | 2000 Isuzu Rodeo

1 Answer

Torque specs


2002 2.0L Duratech.

Don't have 2004 2.3L

  • NOTE: Use new connecting rod bearing cap bolts.
    NOTE: Do not fully tighten the connecting rod bearing cap bolts at this stage.
    Install the bearing caps.
  • Rotate the crankshaft through 180 degrees and insert pistons 2 and 3.
  • Position the corresponding bearing shells, clean and free of oil, into the connecting rod and the connecting rod bearing cap.
  • Coat the inner side of the bearing shells with engine oil.
  1. NOTE: The crankshaft must rotate freely, if necessary check and adjust the bearing clearances.
    Tighten the main bearing and connecting rod bearing bolts.
    1. Tighten the main bearing bolts in two stages.
      • Stage 1: 25 Nm.
      • Stage 2: 60 degrees.
    1. Tighten the connecting rod bearing bolts in two stages.
      • Stage 1: 35 Nm.
      • Stage 2: 90 degrees.
96fc939.gif

Apr 28, 2009 | 2004 Ford Focus

1 Answer

Torque specs


Type: Bolt Dim: Length: Head: Hexagon Grade: 17 Ft-Lbs 204 In-Lbs 23.05 N-m Connects: Crankshaft To Connecting Rod Years: All Vote Record: Vote Note: FS - Rod Cap Bolts - 2 Step: 17FtLbs; +90deg Type: Bolt Dim: Length: Head: Hexagon Grade: 15 Ft-Lbs 180 In-Lbs 20.34 N-m Connects: Crankshaft To Engine Block Years: All Vote Record: Vote Note: FS - Main Bearing Cap Bolts - 2 Step: 15FtLbs; +90deg Type: Bolt Dim: Length: Head: Hexagon Grade: 72 Ft-Lbs 864 In-Lbs 97.62 N-m Connects: Crankshaft To Flywheel Years: All Vote Record: Vote Note: FS - Flywheel/Driveplate Bolts Type: Bolt Dim: Length: Head: Hexagon Grade: 120 Ft-Lbs 1440 In-Lbs 162.7 N-m Connects: Crankshaft To Pulley Years: All Vote Record: Vote Note: FS - Crankshaft Pulley Bolt

Oct 29, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
2004 Kia Sorento EX Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...