Question about 2001 Ford Expedition

Open Question

Location of the remote anti-theft personality module 2001 ford expedition

RAP module or Central Security Module on a 2001 Ford Expedition

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: 2001 ford expedition spark plug location

That's because they are hidden quite well. If you look at the engine, you'll see yellow plastic prongs (?) that look like spark plugs, but hook up to the silver tubing.  That's the fuel injectors.  BUT, right behind the yellow plugs, are black ones.  The black one is the connector to the spark plug.  The plug itself sits about 4 inches down into the block of the engine.  They are a real pain, and from what I can tell, you only have decent access to the first 2-4 of them, then they get too far back and start going under the dash (you'll see what I mean when you get there).

Posted on Aug 06, 2008

  • 2 Answers

SOURCE: I have ford ranger 2003,

You gatta find out if it has any type of theft system and most likely if it does then disconnect it because the computer for it may have malfuntioned and by u disconneting it will deactivate the security for the constint turning over and not starting... so figure that out first...

Posted on Jan 28, 2009

chuck943
  • 783 Answers

SOURCE: i need the location of anti-theft module on 1999

It is behind the glove box. It is also a programable module so if you are replacing it it has to be programed.

Posted on Mar 02, 2009

  • 2 Answers

SOURCE: My 2001 Sport does not have the Remote Anti-theft

It should be mounted on the left side, just in FRONT of the visible area, above the Jack, You might need to pry outward on the plastic panel, Gently, to see it completely.

Posted on Sep 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford expedition interior lights are not on what fuse is it?


Courtesy Lamps - central junction box. fuse # F1.21 that goes to interior lamp relay in the instrument cluster and F.24 this fuse powers battery saver relay .
Interior Lighting The interior light system consists of the following:
  • front map lamp assembly
  • front door courtesy lamp
  • generic electronic module (GEM)
  • glove box lamp assembly
  • central security module
  • interior lamp switch
  • interior lamp relay
  • illuminated vanity mirrors (Navigator only)
  • reading lamp assembly
  • rear courtesy lamp
  • running board lamp
  • underhood lamp assembly
  • The generic electronic module (GEM) illuminates the interior lamps when an unlock signal is received from the remote anti-theft personality central security module. The illuminated entry feature will be canceled when any of the following conditions are met:
    • 25 seconds have elapsed since the illuminated entry feature was activated and the interior lamp control is not activated (door ajar or courtesy lamp switch on).
    • The GEM receives a request from the central security module (remote transmitter lock button pressed) and the interior lamp control is not activated.
    • The ignition is in the RUN or START position and the interior lamp control is not activated.
    The GEM will illuminate the interior lamps when any door is open or ajar. The interior lamps are; the dome lamp, the rear cargo lamp, the door courtesy lamp and the side rail lamps. The courtesy lamps will shut off when the doors are closed and the illuminated entry feature is not active or when the vehicle speed is greater than 5 mph (8 km/h). The interior lamps will not be reactivated until the vehicle speed is less than 3 mph (5 km/h) and a new door open warning lamp switch is received.
    The GEM controls the interior lamps illuminated entry function by activating the interior lamp relay.
  • You have an electronic control module and relays involved in the operation of these lights also !

  • What

    Jan 08, 2015 | 2002 Ford Expedition

    1 Answer

    2001 Ford Taurus flashed theft light while driving and stalls. It does that intermittently. Starts fine.


    IT WILL HAVE EITHER PASSIVE ANTI-THEFT SYSTEM (PATS) MODULE OR REMOTE ANTI-THEFT PERSONALITY (RAP) MODULE . REPLACE THE MODULE.

    Nov 18, 2010 | 2004 Ford Taurus

    1 Answer

    Door key pad coad. where is it


    How to find the Security Keyless Keypad Code on the 1995-2001 Ford Explorer or Mountaineer and how to use the Keypad functions. The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo).

    0f6728f.jpg

    You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

    Hope helps (remember to rate and comment this).

    Sep 23, 2010 | 1999 Ford Explorer

    1 Answer

    My 2001 Sport does not have the Remote Anti-theft Personality (RAP) Module in the left rear quarter behind the removable panel. Any idea where the (RAP) may be installed if not in the remoable panel?...


    It should be mounted on the left side, just in FRONT of the visible area, above the Jack, You might need to pry outward on the plastic panel, Gently, to see it completely.

    Sep 19, 2010 | 2001 Ford Explorer Sport

    1 Answer

    1997 Ford expedition that won't start. It cranks, but doesn't turn over. anti-theft light is blinking fast. Can it be bypassed or reset?


    FORD DEALERSHIP HAS TO FIX.SOUND LIKE THE THEFT MODULE SHUT DOWN VECHICLE.TRY ANOTHER KEY.STILL DONT CRANK LET DEALERSHIP FIX.

    Mar 31, 2010 | 1999 Ford Expedition

    3 Answers

    WHERE DO I FIND THE KEYPAD CODE FOR MY 1997 FORD EXPLORER


    The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo). You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

    The last weekend I search my RAP, find label for read code and now is working.

    RAP Location...
    530d8ab.jpg


    Label Code location...

    9fa0a4d.jpg

    I really hope help with this; remember rated and comment this help.

    Feb 16, 2010 | 1997 Ford Explorer AWD

    1 Answer

    Hello!!! I am having trouble. This has happened one time before and I fixd it but I cant remember how in the heck I did it. Here is the prob...The doors will not lock or unlock by the buttons or the...


    check the fuses to the CSM ( Central Security Module ) .

    CJB ( aka Central Junction Box, cab fuse panel ) Fuse # 15 & 29
    15 is the BPP ( Brake Pedal Position ) Switch, so that should be fine, unless you cannot get the truck out of park while running and the brake lamps don't work.
    29 is the fuse to the CSM ( hot in start or run key positions ).

    BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse # 115 or 8. 115 is for the Supercrew body style and 8 is for the standard cab & SuperCab configuration.

    This is for a build date after 2-OCT-2000 ( 2001 MY ).
    Build date before 2-OCT-2000, the CSM is a RAP ( Remote Anti-theft Personality ), looks the same, same functions, but is not pin for pin compatible.
    Fuses for this are CJB Fuse #8 and 15 and BJB Fuse #4.

    With the CSM / RAP installed, the power door locks are controlled by the CSM/RAP, without the RKE ( Remote Keyless Entry ) installed, they are normal power door locks ( switch to the door lock direct ).

    Worth a start checking the CSM / RAP fuse

    Nov 18, 2009 | 2001 Ford F150 Styleside SuperCrew

    1 Answer

    Dont have a owners manuel so i dont know what the fuse numbers are 93 ford taurus


    1996 is all I have. Look on back of cover for fuse chart.

    Location
    The fuse junction panel is located to the left of the steering column. To expose the fuse junction panel, remove the fuse panel cover (14A003) as outlined.
    db0a7af.gif

    Fuse Loc. Number Fuse Amp Rating Fuse Color Circuit Protected 1 — — Not Used 2 5A Tan Instrument Illumination 3 10A Red Left Low Beam Headlamp 4 10A Red Right Low Beam Headlamp 5 5A Tan Brake/Shift Interlock Rear Window Defrost 6 15A Lt Blue Back-Up Lamps/Air Conditioning, Speed Control, TR Sensor 7 10A Red Starter Relay Power, TR Sensor 8 5A Tan Radio Mute, Power Antenna, GEM Module 9 10A Red Anti-Lock Brake System, Central Temperature Monitor 10 20A Yellow Electronic Engine Control (EEC) Relay, Ignition Coil, PATS, Radio 11 5A Tan Air Bags, Alternator Indicator Lamp 12 5A Tan Gauges, Warning Lamps, Transmission Control Switch, GEM Module, Integrated Control Panel Autolamps 13 5A Tan Air Bags, Blower Motor, Electronic Automatic Temperature Control 14 5A Tan Light-Out Module 15 10A Red Multi-Function Switch (Turn Signals) 16 — — Not Used 17 30A Lt Green Front Windshield Wipers/Washers 18 5A Tan Headlamp Switch Illumination 19 15A Lt Blue Rear Window Wiper/Washer 20 5A Tan Radio Memory, Phone, Remote Anti-Theft Personality (RAP) Module, Integrated Control Panel (ICP) 21 20A Yellow Cigar Lighter 22 5A Tan Power Rearview Mirrors, Antenna, Decklid Lamps, Autolamp 23 5A Tan Generic Electronic Module (GEM) Power, Remote Anti-Theft Personality (RAP) Module, Passive Anti-Theft System (PATS) Module 24 5A Tan Integrated Control Panel, Radio, Speedometer 25 10A Red Diagnostics (Data Link Connector) (DLC) 26 15A Lt Blue Decklid Release 27 10A Red Battery Saver System 28 15A Lt Blue Stoplamps, Speed Control 29 15A Lt Blue Multi-Function Switch (Hazard Lamps) 30 15A Lt Blue Highbeam Headlamps, Daytime Running Lamps (DRL), Instrument Cluster 31 5A Tan Tail Lamps 32 5A Tan Heated O/S Rear View Mirrors, Integrated Control Panel (ICP) 33 5A Tan Power Window and Lock Switch Illumination 34 — — Battery Saver Relay 35 — — Driver Unlock Relay 36 — — Rear Defrost Relay 37 — — Interior Lamp Relay 38 — — Driver Power Window Relay (One Touch Down) 39 — — Accessory Delay Relay

    Apr 09, 2009 | 1993 Ford Taurus

    1 Answer

    VEHICLE WONT START


    Section 13-11: Anti-Theft System, Active 1998 Windstar Workshop Manual DESCRIPTION AND OPERATION Anti-Theft Alarm System NOTE: The system immediately monitors the ignition key lock cylinder upon removal of the key from the ignition. It is not necessary to arm the system for ignition key lock monitoring.

    The anti-theft alarm system:
    • protects the vehicle from unauthorized entry into the passenger compartment, engine compartment and cargo area.
    • monitors the status of the ignition key lock cylinder.
    • is controlled by a remote anti-theft personality (RAP) module. The remote anti-theft personality module also controls the electronic door lock functions. Refer to Section 01-14B for more details.
    • when armed, detects unauthorized entry into the passenger compartment by using an input from the GEM module regarding the state of the door or liftgate (open or closed).
    • protects the engine compartment with a hood switch which is located on the LH cowl vent panel and is part of windshield wiper motor wiring (17A477) .
    • triggers an alarm if the ignition lock cylinder is forcibly removed from the steering column.
    Once triggered, the system responds by:
    • flashing the low beam headlamps, the parklamps, rear lamps and the alarm indicator warning light emitting diode (LED).
    • sounding the horn (13832).
    • disabling the starter circuit until the system is disarmed.
    ---------------------------------------------------------------------------------------------
    Remote Anti-Theft Personality Module
    • The remote anti-theft personality module is located behind the instrument panel (04320).
    • It contains a radio receiver that receives the RF signal from the keyless entry remote transmitter (15K601) through the alarm and lock system antenna (15603) and sends the appropriate command to the power door locks, the horn relay, or the generic electronic module.
    • The remote anti-theft personality module is equipped with an internal backup power supply which holds the programmed code in memory in the event the vehicle battery is disconnected.
    -------------------------------------------------------------------------------
    Remote Anti-Theft Personality Module Removal
    1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    1. Remove radio. Refer to Section 15-01 .
    1. Remove lower instrument panel center finish panel. Refer to Section 01-12 .
    1. Lower glove box.
    1. Remove two remote anti-theft personality module bracket retaining screws.
    1. Disconnect electrical connectors and alarm and lock system antenna (15603).
    1. Remove remote anti-theft personality module and bracket.
    1. Remove remote anti-theft personality module from mounting bracket.
    Installation
    1. To install, follow removal procedure in reverse order.
    1. Tighten remote anti-theft personality module bracket retaining screws to 6-8 Nm (54-70 lb-in).

      34bdf35.gif
    Components The system is composed of the following components:
    • remote anti-theft personality (RAP) module with integral antenna
    • alarm indicator LED
    • door lock cylinder switch RH, door lock cylinder switch LH
    • liftgate door lock cylinder switch (220A40)
    • hood switch (part of windshield wiper motor wiring (17A477))
    • ignition lock anti-theft switch (19A438)
    The following vehicle components are also used by the anti-theft alarm system:
    • generic electronic module
    • power door lock switch (14028)
    • door open warning lamp switch (14018)
    • autolamp relay (14N089)
    • horn relay and bracket (13853) and horn (13832)
    • low beam headlamps
    • rear lamps (13404) and parking lamps (13200)
    • starter relay
    • door lock relays
    • keyless entry remote transmitter (15K601)
    --------------------------------
    Disarming an Untriggered System NOTE: A perimeter alarm will "shut off" after 165 seconds, but the system is still triggered and is not disarmed.

    An armed but untriggered perimeter anti-theft system can be disarmed by one of the following four events:
    1. Unlock the doors by pressing the keyless entry remote transmitter (15K601) UNLOCK button once.
    2. Unlock any door with a key.
    3. Turn ignition switch to RUN or ACC.
    4. The remote entry PANIC button will disarm the anti-theft system only when the perimeter alarm is triggered and sounding.
    ------------------------------------------------
    System Triggering NOTE: Although the remote entry PANIC alarm is not associated with the monitoring of the vehicle, the user will frequently say that the theft system was triggered when actually the keyless entry remote transmitter PANIC button was inadvertently pressed. A panic alarm will not flash the THEFT indicator.

    The alarm can be triggered by the following events if the system has been armed and has not been disarmed first:
    • Open any door or liftgate.
    • Open the hood (16612) (if the hood was open when the system was armed, it must be closed before it can trigger the alarm).
    • Dislodge the ignition key lock cylinder.
    • The anti-theft system may be triggered inadvertently when the module is disconnected and then reconnected. To avoid inadvertent alarm triggering, disconnect the smaller 22-way connector first.
    When the system is triggered the perimeter alarm will operate as follows: The remote anti-theft personality module will pulse the following outputs at approximately 1.3 Hz, 50 percent duty cycle for two minutes 45 seconds for North America. NOTE: Other perimeter alarms can be programmed for the system.

    • low beam headlamps
    • parking lamps
    • horn
    • THEFT indicator
    The perimeter alarm can be retriggered, after a perimeter alarm has sounded for 165 seconds. After a perimeter alarm has timed out, if any trigger input is first seen as normal and is then seen in its trigger state, the perimeter alarm will be retriggered. The perimeter alarm can be triggered a total of three times between an arming sequence and a disarm event. An active panic alarm will be deactivated when a perimeter alarm is triggered (a perimeter alarm overrides a panic alarm).

    Mar 02, 2009 | 1998 Ford Windstar

    Not finding what you are looking for?
    2001 Ford Expedition Logo

    Related Topics:

    316 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    fordexpert

    Level 3 Expert

    5495 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...