Question about Cars & Trucks

1 Answer

Spectra Physics Model 945 Laser Transmitter power cable

Where to find a power cable

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Power cables are not sold for the 945 Lasers anymore. You will have to build one, or find a dealer who will. They are not complicated. It's just a 3 socket 1/4 turn bayonet connector, with 2 wires (+ and -) going to 2 power clips.
The 945's are tremendous lasers, I hope you dont scrap it, over a power cord.

Posted on Dec 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a vehicle power cord for my dashcam uniden 945


JAYCAR or similar electronic shop have a range or plugs that will fit

Jun 05, 2016 | Cars & Trucks

1 Answer

Physics charging system


Sounds like the alternator is toast.

Feb 08, 2014 | 2006 Kia Spectra EX

1 Answer

My cd palyer dont work in kia spectra the radio work fine


the laser in your cd player is bad or it could be the motor on it to not in the car the one in the cd player

Dec 10, 2009 | 2004 Kia Spectra

3 Answers

I have a 2005 kia spectra. The power door lock,


dirty solonoid inside the door ,take door panel off and give everything in sight a good oil with a proper oil can with engine oil in it ,also check the mechanism from the barrel to the electrical switch because a bit of plastic could have broken off where it turns to operate the switch that works the central door locking

Oct 30, 2009 | 2005 Kia Spectra

1 Answer

Got the car back from bodyshop same thing no clock or radio and keyless entry problems


Sounds like they disconnected your battery when they were working on your car. Your radio probably requires an unlock code to get it to work again which you'll have to get from a dealership with proof that the car is yours.

They key fob will also have to be reset.

  1. Close all the vehicle doors.
  2. Insert the ignition key into the ignition lock cylinder.
  3. Press and hold the door unlock switch.
  4. While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
  5. Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
  6. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
  7. Turn the ignition switch to the On position in order to exit the keyless entry transmitter programming mode.
  8. Operate the transmitter functions in order to verify correct system operation.

Sep 09, 2009 | 2005 Kia Spectra

1 Answer

2002 kia spectra timming belt digram needed to verify timming marks. Dual overhead camshaft.


  1. Disconnect battery negative cable.
  2. Remove power steering and air conditioning compressor drive belt by loosening power steering fasteners.
  3. Remove generator bolts and generator belt.
  4. Remove water pump pulley.
  5. Remove crankshaft pulley and timing belt guide plate.
  6. Remove upper/lower timing belt covers.
  7. Turn crankshaft clockwise until "I" mark on intake camshaft pulley and "E" mark on exhaust camshaft pulley align with marks on cylinder head cover.
48d7b82.gif

Aug 29, 2009 | 2002 Kia Spectra

1 Answer

Replace thermostat 2003 kia spectra


Hello, my name is Mario.

1. Disconnect battery negative cable.
2. Drain engine coolant
3. Remove bolt and nut for thermostat housing
4. Remove the old thermostat
5. Put a new thermostat and gasket (Install thermostat into cylinder head with jiggle pin positioned up.)
6. Place thermostat housing
7. Fill radiator with engine coolant
8. Connect battery negative cable
9. Start engine and check for leaks.

Good luck

Jan 10, 2009 | 2003 Kia Spectra

3 Answers

I have a Toyota Landcruiser Prado SX 3.0 1994 Turbo Diesel, Engine No 1 KZ-0065839. The Electric Switches for the 4WD and Hub Lock light up when they are pushed on but the car does not go into 4WD. I...


το προβλημα ειναι ενα μικρο συρμα που κανει επαφη σε ενα απο τουσ δυο τροχουσ μπρωστα

Jul 17, 2008 | 2006 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...