Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i just replaced the timing belt, and asked the garage to look at the transmission for me because i thought i was experiencing some subtle shifting problems. they told me the transmission looked fine, but i needed a new filter and fluid. the engine light didnt turn on til a couple weeks later tho. does this sound like a new filter and fluid would fix this problem?
Posted on Sep 09, 2008
dealers are very rude and they will all ways charge you more money then needed. I got codes for my car from and personal owner (small business) they did a check engain scan and the codes came up and they were very nice after I had asked if they would please write down the meanings of the codes, When they did that there were some that they did not know but the parts store like schuck's will scan for free and again they will also write down what part you will need for the code and they should also know about those other codes as well. I do live in Vancouver, Wa and I'm not sure where you are located but the people that are helping you should like they really don"t want to help. Rude people every where.
Posted on Nov 29, 2008
All of the codes are related to the transmission. Some indicate the input speed sensor. I'd bring it back to the transmission shop and tell them to deal with it. I don't know what your car was doing before you had the transmission replaced so it's hard to tell whether the repair was needed but since it was done, the problem should be the transmission shops, not yours. Best of luck and please post back, would love to hear how you make out. Greg
Posted on Jun 15, 2009
SOURCE: I recently had the engine
New? used ? dealer? You need to have the "shop" fix it, if they refuse to fix it, for free, have it fixed and sue them for the bill. Theres no excuse for letting a car like that out of the shop, engine replacements need a good 20 mile test drive and check out. If you overheat the engine, you are done, no warranty .
Posted on May 14, 2010
Hello, all your codes are related to transmission shift solenoid circuit condtion eg: Transmission > Automatic Transaxle > P0750 Low and Reverse Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0755 Underdrive Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0760 Second Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0765 Overdrive Solenoid Valve Circuit - Open or Short(GND). Wether your vehicle is equipped with a 4 cylinder or v6 ,all the codes are for either engine models. Check your main wire harness that plugs into the top of the transmission and verify,that a good connection is present. if all looks ok and the vehicle still exibits the same symptoms. The problem may also be in the ECM/TCM control module itself. A Hyundai dealer would have the proper scan tool and tester to verify and perform actuation tests on the shift solendoids themselves to make sure they are working correctly. This does not mean that the transmission itself has failed. You basically have an open circuit somewhere that the solenoids are not getting a good ground. Hope this helps.
Posted on Jan 31, 2011
Tips for a great answer:
Nov 08, 2015 | Plymouth Cars & Trucks
Nov 07, 2015 | Cars & Trucks
Jul 10, 2014 | 2004 Hyundai Elantra
Feb 18, 2011 | Ford Taurus Cars & Trucks
Jan 31, 2011 | Hyundai Santa Fe Cars & Trucks
Oct 13, 2010 | 2000 Lincoln Continental
Sep 25, 2009 | 1999 Lincoln Continental
38 people viewed this question
Usually answered in minutes!