Question about Cars & Trucks
Getronic GT482/GT82N, installed on a Vauxhall Astra (2005 I think). I just want to disable the alarm completely but don't want to risk immobilising the car etc. Any recommendations?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a way to override the code, however you need the code number. The only other way is to sit in car with door shut, play with the central locking button on dash, locking and unlocking. While doing this occassionally turn the ignition on and off. If you do it long enough, you may find the immobiliser light goes out, if it does, quickly start the car.
Posted on Jan 21, 2009
This sounds like a problem in the fuel shut off circuit. When you turn the key on, it energizes the fuel shut off solenoid on the injection pump. When you turn off the key, power is removed and the pump is moved by spring to the fuel off position. Check for power at this terminal when you are having a problem, ( with the key on) If no power then I would check the wiring and connectors from this connection to the Ignition key. I believe it is wired direct. That can be checked at http://www.alldata.com/products/index.jsp
subscribe3 and get a wiring schematic for the car and see if it is wired direct to the ign switch of from a relay, I am sure it is a connection problem if you have no power.
A 1.7 diesel even if turboed, is dead slow in any vehicle let alone a van. Enjoy the fuel economy
Posted on Mar 17, 2009
Find where your fuel pump relay is and check for power there. Most alarm tech's and alarm system dis engages the fuel pump at there relay's.
Simple things to check is the fuse first then go for the relay and if everything there is working properly, it could be your alarm may have gone bad or your fuel pump it self.
Good luck and hope this helps
Posted on Apr 13, 2009
take wire harness apart underseat that connects to seatbelt on drivers side. then take a piece of aluminum foil and stuff it into male part so it makes contact with both prongs and plucg connection back together..problem solved!!!!!!
Posted on Feb 03, 2010
Tips for a great answer:
Jul 02, 2016 | Vauxhall Cars & Trucks
Jun 29, 2016 | Vauxhall Cars & Trucks
Mar 03, 2015 | Vauxhall Astra Cars & Trucks
Feb 02, 2015 | Cars & Trucks
Dec 27, 2014 | Vauxhall Cars & Trucks
Oct 02, 2012 | Cars & Trucks
Jul 28, 2012 | Vauxhall Astra Cars & Trucks
May 11, 2010 | 2005 Peugeot 405
Jan 14, 2010 | 2005 Ford Focus
319 people viewed this question
Usually answered in minutes!