Hyundai Motor 2004 Sonata Logo

Related Topics:

A
Anonymous Posted on Jan 16, 2013

Where is crank sensor on 2004 sonata 2.4 - Hyundai Motor 2004 Sonata

4 Related Answers

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Apr 03, 2009

SOURCE: crank sensor location on Hyundai Sonata 2003 model

look carefully on bellhousing and rocker cover/head it has to be somewhere

Ad

Roger Foster

  • 701 Answers
  • Posted on Sep 02, 2009

SOURCE: where is camshaft sensor located 2004 sonata v6

Hello police32127. My name is Roger and i will answer your question. To locate the camshaft sensor. Raise he hood stand at the drivers side tire. Look at the cylinder head on your left. You will see it mounted on the head. Sets between the head and the upper radiator hose.
Please rate the answer you received. This way w know your answer helped. Should you need further help please just ask. Thank You for using Fix Ya. Roger

jturcotte

Jeffrey Turcotte

  • 8991 Answers
  • Posted on May 06, 2011

SOURCE: Is it possible to get a diagram of the crank

Hi, in both engines the crank sensor is at the back of the engine by the transmission. The sensor is #10 in the diagram below and looks like the picture included.
jturcotte_1640.gif

4-cylinder crank sensor:
jturcotte_487.jpg

6-cylinder crank sensor:
jturcotte_488.jpg

Anonymous

  • 1 Answer
  • Posted on Dec 07, 2011

SOURCE: diagram 2004 hyundai sonata crankshaft sensor A

U uvicasion del crank shaft position sensor

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Went to Deq for emissions test and the diagnostic codes read p0320 on 2004 Hyundai sonata what needs to be replaced?

P0320 =no signal detected from crankshaft position sensor during cranking, my guess is replace the CPS
0helpful
2answers

Why car my car start?

No spark? Then there is probably no signal to trigger the spark. Possible causes:
1) Cam position sensor.
2) Crank position sensor (you replaced it)
3) Coils (already replaced)
3) Wiring and connections to and from coils (bad grounding points or bad live feeds)

Suggestion: Stop the guessing and spending with "probable" causes. Have the car scannned for error codes and start from scratch according to error codes.
0helpful
2answers

Why car my car start?

there are 2 pieces to the crankshaft sensor...one is a little round thing that is mounted under the valve cover on the driver side. The other part plugs into this and the cable runs down under the other side of the engine. The sensor is inside the timing belt cover.

i had your problem a month ago and had the little round part replaced and that worked for me.

2004 Sonata 4 cyl auto

6705fbcd-454b-4a4a-a70f-a033a56ef059.jpg
1helpful
2answers

Hyundai sonata cranks fine but won't start

other things it could be crank position sensor or maybe a fuel issue?
2helpful
2answers

Is it possible to get a diagram of the crank sensor for the 2004 hyundai sonata

Hi, in both engines the crank sensor is at the back of the engine by the transmission. The sensor is #10 in the diagram below and looks like the picture included.
jturcotte_1640.gif

4-cylinder crank sensor:
jturcotte_487.jpg

6-cylinder crank sensor:
jturcotte_488.jpg
1helpful
1answer

Diagram 2004 hyundai sonata crankshaft sensor A

U uvicasion del crank shaft position sensor
3helpful
1answer

My 2004 hyundai sonata will not crank. It turns over but won't catch.

check to see if getting spark or fuel if no spark could be crank sensor or cam sensor have to check voltage out of wiring harness if low voltage ecm bad. Pull both coil wires off coil and have someone turn ignition no spark probably ecm. For fuel check number one plug see if wet and also listen when you turn key for fuel pump. If driving it just died on ya and battery went dead like know and you tried jumping or replacing battery.Still would not start ecm bad.
1helpful
1answer

We are attempting to change the Crankshaft Angle Sensor and struggling with what all needs to be taken off of the engine to get to the bottom of the sensor. 2004 Hyundai Sonata.

crank shaft sensor don't normally go bad on hyundai.do you have a code for this?and what is the complaint?on the v-6 its behind the timing belt.next to the crankshaft gear.on the 4 cyl. its on the front of the block below exh. manifold. and easy to remove.
Not finding what you are looking for?

171 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...