Question about 1999 Chevrolet Silverado 1500

Open Question

Where is fuel pressure regulator on a 2007 suburban?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: fuel pressure regulator had no vacuum line connected

another engineers wet dream. think of it this way . what is normally in the intake when the engine is running.. answer vacume, hence the regulator gets its vacume without a hose connected to it as its already in a full time vacume chamber.no hose required . ps be carefull to seat the regulator and o rings securely into the housing befor you reattach the secureing metal clip.
good luck chris

Posted on Mar 23, 2009

Ad
csmock132
  • 4669 Answers

SOURCE: truck wont start

Check the fuel pressure. It needs to be 55 or higher no less.

Posted on May 06, 2009

play0027
  • 107 Answers

SOURCE: location of the fuel pressure regulator valve 99

http://www.youtube.com/watch?v=vTvDCFRHJXE&feature=related


http://www.youtube.com/watch?v=UHTV3W5VI5w

Posted on Nov 20, 2010

  • 16 Answers

SOURCE: were is the fuel pressure regulator located on

Located in fuel meter assy inside intake manifold.

Posted on Dec 31, 2010

czaa
  • 4536 Answers

SOURCE: 1992 chevy suburban 7.4 4WD replaced fuel pump, fuel filter, and fuel pressure regulator not getting gas to one side of fuel injectors

hold on with replacin parts-----did u do a scan--------also the rail cud be pluged or you probly need a pressure chec on fuel line

Posted on Apr 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of fuel pressure regulator on my 04 chevy suburban


Fuel pressure regulators are normally at the end of the fuel manifold with the return hose going back to the tank attached.

Mar 31, 2013 | 2004 Chevrolet Suburban

1 Answer

I have a low pressure fuel code and my 1988 suburban will not run very well what should I do?


Hi!!
Start by replacing the fuel filter and check vacuum hose to fuel pressure regulator, if that does not solve the problem, check the fuel pressure, borrow a Fuel Pressure Tester from AutoZone, Checkers or similar autoparts store and check fuel pump pressure. They will tell you the correct pressure.
1kbron_90.jpg
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Jan 09, 2011 | 1988 Chevrolet Suburban

1 Answer

Runs rough too rich replaced oxy. sencer &temp. sencer.1987 suburban 350 .thinking about changing maps sencer next


That may help. Also check for fouled plugs. Also check the fuel pressure regulator on fuel rail, check for vacuum at the regulator.

Mar 06, 2010 | 1987 Chevrolet Suburban

2 Answers

Where is the fuel pressure regulator on a 99 gmc suburban 2500 7.4l v8


5.7L And 7.4L Engines
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Remove the upper manifold assembly.
    NOTE If the fuel pressure regulator is to be reinstalled, inspect the filter screen (if equipped) for contamination. If the filter screen is contaminated, replace the regulator.
  4. Disassemble the fuel pressure regulator snap ring retainer.
  5. Disassemble the regulator assembly and the O-rings.
  6. Discard the O-rings.

    0996b43f80205553.jpg Fig. Fuel pressure regulator
To install:
  1. Lubricate the new O-rings with clean engine oil.
  2. Install the backup O-ring, the large O-ring, the filter and the small O-ring.
  3. Assemble the regulator with the vacuum tube pointing down into the snap ring retainer.
  4. Install the upper manifold assembly.
  5. Connect the negative battery cable.
Good luck

Mar 02, 2010 | 1999 GMC Suburban

2 Answers

Where is the fuel regulator located on a 1988 tbi


Sits inside the throttle body, you would have to open to install regulator. Also check your fuel filter make sure it's not clog, fuel filter is under truck on fram rail, while your there do a fuel pressure test, with a fuel pressure tester, should have 13psi.

Nov 14, 2009 | 1988 Chevrolet Suburban

2 Answers

1997 chev. suburban new fuel pump and regulator WILL NOT START


Check fuel pressure and fuel flow, If the pressure is lower than what is recomended injectors will not function correctly , no start condition (trys real hard though)

Mar 24, 2009 | 1997 Chevrolet Suburban

1 Answer

Fuel pressure regulator had no vacuum line connected


another engineers wet dream. think of it this way . what is normally in the intake when the engine is running.. answer vacume, hence the regulator gets its vacume without a hose connected to it as its already in a full time vacume chamber.no hose required . ps be carefull to seat the regulator and o rings securely into the housing befor you reattach the secureing metal clip.
good luck chris

Mar 22, 2009 | 1997 Chevrolet Suburban

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...