Question about Chevrolet Colorado

Open Question

Idler pulley bracket broke on 2004 colorado how to replace it

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: serpentine belt slips off idler pulley

The A/C pully is supposed to spin freely until the AC is activated to run.. The cranshaft pully does not. Replace the tensioner pully. The belt has to fit in between the grooves on the pullys.

Posted on Apr 05, 2009

SOURCE: Replace idler arm pulley

An idler arm is a steering component found on vehicles without rack and pinion steering. Your referring to an idler pulley. To replace: remove the belt, remove the bolt from the center of the pulley, replace the pulley and reinstall the belt.

Posted on Apr 17, 2009

Saaboheme
  • 76 Answers

SOURCE: do you have a diagram on routing the drive belt?

The diagram on the right in this link provides the exact diagram/pic. for your car. The link is to a site that explains how to convert earlier NG models (which had an extra center idler pulley) to a shorter belt, ala the newer models such as yours which had eliminated this idler. See also, this site for additional information. Another diagram is here with part numbers for the pulleys and the belt. This is about a one hour job to replace the belt and one or two pulleys. Ensure the pulleys are lined up correctly to avoid throwing the new belt when you start it up.

Posted on Apr 30, 2009

ghost4548
  • 776 Answers

SOURCE: 2000 Hyundai Accent lower idler pulley

Yep Ron... go to http://www.hmaservice.com/ anb register (veh VIN). Afterward, you can navigate the site to find the information you seek (service bulletins, manuals, wiring diagrams, etc.).

Posted on May 30, 2009

  • 67 Answers

SOURCE: need to remove idler pulley in order to replace water pump

pretty simple really take the belt off and the pulley is held on with a 12mm or 14mm bolt and then put it all back together the way it came apart. hope this has helped you and good luck with you project !

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Idler pulley bracket where can I buy one or is there an alternative to it


you need to post year, make, model and what engine?
also which idler pulley? I'm guessing you're probably looking at the accessories drive belt ("fan belt") idler pulley bracket.
Is this a serpentine belt.
a lot of cars use Idler and or tensioner pulleys on the timing belt/chain. the Idlers often don't have brackets
why are you replacing the bracket? did you break it? or do you just need the pulley? I normally replace both pulleys (idler and tensioner) when replacing either one.
anyways.. need a lot more info to answer your question

Dec 24, 2016 | Cars & Trucks

1 Answer

Thermostst replacementhow do you replace it


1.) Remove lower hose to drain radiator.
2.) Remove fan shroud, belt, idler pulley, and alternator.
3.) Remove block side of lower hose and thermostat housing.
4.) Remove and replace thermostat.
5.) Replace everything in reverse order.

Apr 06, 2012 | 2004 Chevrolet Colorado

2 Answers

2003 Mitsubishi Galant Idler Belt Tensioner Replacement


I also need help knowing how to replace the belt tensioner pulley. It looks like you can't get out the bolt because the pulley is real close to the frame, unless the bolt has nuts on both ends, but it doesn't look like it.

Dec 03, 2011 | 2003 Mitsubishi Galant

1 Answer

Change timing belt galant 04 mivec 2.4


49885ff.gif
Timing belt “B” (balancer belt) and related components—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


  1. Disconnect the negative battery cable. Remove the engine under cover.
  2. Remove the crankshaft damper pulley.
  3. Disconnect the control wiring harness connector, battery wiring harness connector and connector bracket to engine mounting insulator.
  4. Remove the harness bracket. Remove the upper timing belt cover. Remove the water pump pulley. Remove the idler pulley.
  5. Remove the auto tensioner. Remove the lower timing belt cover.
  6. Turn the crankshaft clockwise and align each timing mark to set the number one piston to TDC of its compression stroke.
  7. Remove the timing belt under cover rubber plug and then install special tool MD998738. Screw the special tool until it contacts the timing belt tensioner arm.

    NOTE The special tool must be screwed in gradually at the rate of a 30 degree turn per second. If it is screwed in all at once, the timing belt tensioner adjuster rod will not easily retract and the tool may bend.

  8. Gradually screw in the special tool and then align the timing belt tensioner adjuster rod set hole “A” with the timing belt tensioner adjuster cylinder set hole “B”.
  9. Insert a wire or pin in the set holes to lock the assembly in place. After removing the special tool, loosen the timing belt tensioner pulley mounting bolts and remove the timing belt. If the belt is being reused be sure to mark the direction of rotation (clockwise) on the belt.
  10. Remove the timing belt tensioner pulley, tensioner arm and adjuster.
  11. Remove the timing belt idler pulley. Remove the timing belt lower cover bracket. Remove the crankshaft position sensor.
  12. Remove the crankshaft pulley center bolt and washer. Remove the drive sprocket. Remove the crankshaft angle sensing blade.
  13. Remove the balancer timing belt tensioner. Remove the timing belt “B” (balancer belt) from its mounting.


284eb62.gif
Timing belt tensioner adjuster rod set hole “A” and cylinder set hole “B”—2004–2005 Galant and 2004–2005 Lancer 2.4L engine

To install:


78b2d67.gif
Belt tension checking—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


b8fcecc.gif
Cylinder block plug location—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


bad1ef9.gif
Timing belt sprocket alignment—2002–2004–2005 Galant and 2004–2005 Lancer 2.4L engine

Feb 27, 2010 | 2004 Mitsubishi Galant

2 Answers

Belt keeps coming off,already replaced everything,added guards,nothing works,any sugestions?


My van is doing the same thing I installed the new bracket and it did it again tonight, thats less the 24 hours...

Feb 15, 2010 | 1998 Dodge Caravan

1 Answer

Getting a high pitched whining sound that increases and decreases with accelleration and decelleration


it is your idler pulley. get it from dealer comes with bracket, just use pulley off bracket. take your belt off and your idler pulley is lower right hand side(facing your engine). 15mm bolt, replace pulley and reinstall your belt. it;s a common problem on trailblazers

May 05, 2009 | Chevrolet TrailBlazer EXT Cars & Trucks

1 Answer

Idler pulley wheel broke


Take it to the dealer it is a pain in the *** tto change yourself, you have to drop the motor down on the passenger side and take off the main bracket just to get to the pulley.

Nov 13, 2008 | 2001 Dodge Neon

1 Answer

Power Steering Pump removal


you havr the whole bracket with pump .next you will need PS pulley removal tool take out 3 bolts same tool needed to replace pulley

Oct 18, 2008 | 2004 Chevrolet Colorado

1 Answer

Alternator idler pulley replacement.


Hi

Compare the new pulley to the old one. I think you'll find you have been supplied with the wrong pulley.

Very best regards

Geordie

Jun 10, 2008 | 1996 Mazda MX-6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...