Question about 2005 Ford Explorer Sport Trac

1 Answer

2005 ford sport trac

How do u remove the door panel drivers side .. sorry if i reposted it i wasnt sure if it deleted it on me .. the diagram at isnt very clear .. please help

Posted by on

  • 2 more comments 
  • andrew mccorkle
    andrew mccorkle Jan 24, 2009

    window being off track how can that be fixed ?

  • andrew mccorkle
    andrew mccorkle Jan 24, 2009

    thanks worked great i did it with a small screw driver but would of worked easier with trim tool but its off now to bigger problem dowindow off track .. thank you so much

  • Wonz Feb 05, 2009

    I have a 2005 Sport trac...The window came off trac, I read how to take off the panel. But what problems will occur when I try to put the window back on track. It also pushed out my key pad entry that was on the side of the door.

  • Wonz May 11, 2010

    Posted by Wonz on Feb 05, 2009
    I have a 2005 Sport trac...The window came off trac, I read how to take off the panel. But what problems will occur when I try to put the window back on track. It also pushed out my key pad entry that was on the side of the door.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Use a trim removal tool to remove the clips that hold the door panel on the outer edges. Work from the bottom up and when you get to the middle, remove the screws that hold the arm rest in place. You may need a small flat-bladed screwdriver to get any trim around any switch plates. Be careful with the door handle as you slide the door panel off, as many people complain that they can't get it to work once they put it all back together. (don't let it get bent too severely or let any parts fall off.) When you work on this, have a magnet on a telescoping handle handy in case anything falls into the door that you need to retrieve. You can get a trim tool at any auto parts store.

Posted on Jan 24, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Fuse box diagram for 2005 ford explorer sport trac

Go to free diagrams . Fill in vehicle info . year ,make , model ,engine size . System - click on electrical distribution then under subsystem click on fuse panel .

Sep 18, 2016 | 2005 Ford Explorer Sport Trac

1 Answer

Fuse panel box diagram for 2010 explorer sports trac

F5 5 Rear window motor. Roof opening panel module. Auto-dimming interior mirror unit. Door lock switch, driver side. Door lock switch passenger side. Power window motor, driver side front. Overhead console switch assembly
Not sure if this is what you're looking for. Let me know if it works.

Jul 18, 2014 | 2010 Ford Explorer Sport Trac

1 Answer

I need to know how to replace the driver side mirror on a 2004 ford explorer sports trac?

By using this diagram, just remove the interior cover by the #1 in the diagram and then unplug the connector and the rest is straight forward.

Mar 06, 2010 | 2004 Ford Explorer Sport Trac

1 Answer

Remove inner panel drivers door on sport trac

Take out the screws around the inner handle. Gently pry around the edges of the door panel to remove the plastic clips. Lift up slightly to get the upper edge loose. Pull out slowly to reveal the plug leading to the back of the power master switch (door locks and windows controls)

Feb 25, 2010 | 2002 Ford Explorer Sport Trac

2 Answers

How can i get the keypad code to unlock my 2005 ford explorer?

The factory keypad code is the bold numbers listed on the side of the keypad module, should be located under the drivers side dash on the left, look for the numbers that are in bold type. Hope this helps, let me know

Dec 14, 2009 | 2005 Ford Explorer Sport Trac

1 Answer

My drivers side electric window stop working 2002 ford sport trac. how do you change the motor

To remove the door panel, phillips head door screws should be removed, and the panel should slide up. Next, unbolt the window from the regulator and remove the window from the door. Then unbolt the regulator. The regulator and the motor have to be removed together. The motor will be mounted to the door on the inside. There should be three screws or nuts (10mm) holding the motor in. Remove motor and regulator. Reverse to reinstall.

Jul 11, 2009 | 2002 Ford Explorer Sport Trac

1 Answer

2005 ford sport trac

Well their should be screws under little caps take those out and a cap near the mirror. and then you should be able to slide upward and get the trim panel off

Jan 24, 2009 | 1999 Ford Explorer

1 Answer

Door panel removal

carefully start at bottom of panel & pry away with door open ,but make sure you take any screws out holding on most are in handle area, along with any wire harness connections should be held to door with button rivets (small plastic pressure rings)once all are lose inside panel should lift up off door.

Jan 06, 2009 | 2002 Ford Explorer Sport Trac

1 Answer

Changing outside door handle drivers door

first disconnect the negative side of battery and then open the door and start looking for small black screws or nuts then remove you find some hidden behind what look like little doors that you will need to remove with a screw driver becareful not to pry the plastic completely out of the door panel itself because if this happens you will have to figure out a way to repair so the panel will stay on the door get a thin pry bar to this job or a butter knife

Jan 05, 2009 | 2001 Ford Explorer Sport

Not finding what you are looking for?
Cars & Trucks Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides