Question about Mercury Tracer

Open Question

Diagram on serpentine belt 1998 Mercury Tracer ls

Tensioner location

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mike258
  • 1498 Answers

SOURCE: serpentine belt for 1998 mercury tracer

Hey there MSM,

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator. The routing diagram is on one of the radiator supports.
  • The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Dec 14, 2008

  • 1 Answer

SOURCE: i need a routing diagram for a serpentine belt

i got the car fixed. my son, who is familiar with the car, came over and had the belt on in 20 minutes. thank you for your help.

Posted on May 18, 2009

ZJLimited
  • 17970 Answers

SOURCE: I need a diagram of a how to install a serpentine

1998 MERCURY TRACER - L4 2.0L 1989cc 122ci GAS FI N P

Belt Routing Diagram / Multiple Accessory, w/A.C.

8e6e46f.jpg


More details HERE

I hope help you (remember rated this help) Good luck.

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the Airconditioning/power steering belt on a Grand marquis, Mercury(1992)? please show me in a diagram or print somehow


Move the Grand Marquis's serpentine belt tensioner off the serpentine belt with the serpentine belt tool. Pull the belt of the remaining pulleys by hand. Take the belt out of the engine well. Wrap the new belt around the bottom portion of the crankshaft pulley. Follow the belt routing diagram to route the belt over each remaining pulley until only the tensioner remains. Move the Grand Marquis's serpentine belt tensioner aside once more and slip the belt onto the tensioner pulley.Hold the belt in place with one hand while you move the tensioner slowly back into position with the other. Here you can fine the quality AC parts http://www.1airconditioning.com/ac_compresor.htm

Aug 24, 2011 | 1992 Mercury Grand Marquis

1 Answer

I need a serpentine belt diagram for a 1999 ford escort


SECTION 303-05: Accessory Drive 1999 Escort/Tracer Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/06/1998 Accessory Drive Component Locations -2.0L SPI with A/Ca27194a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 8678 Belt idler pulley 6 2E884 A/C clutch pulley 7 6316 Crankshaft damper

Component Locations -2.0L SPI without A/Ca27193a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 6316 Crankshaft damper

Component Locations -2.0L Zetecaq0167a.gif
Item Part Number Description 1 10300 Generator pulley 2 19A216 Belt idler pulley 3 3D673 Power steering pump pulley 4 8509 Water pump pulley 5 6B209 Belt tensioner 6 19703 A/C clutch pulley 7 6B320 Crankshaft pulley damper 8 19A216 Belt idler pulley 9 8620 Drive belt NOTE: Drive belts (8620) with automatic drive belt tensioners (6B209) do not require adjustment.
NOTE: When a new drive belt is installed or a drive belt is re-installed after a service procedure, the drive belt does not fully seat into the pulley grooves until engine has run for several minutes.
This vehicle is equipped with:
  • a V-ribbed serpentine accessory drive belt.
  • an automatic drive belt tensioner.
New drive belts must be of the same type as originally installed.
Check the drive belt condition at 96,000 km (60,000 miles) then after every 24,140 km (15,000 miles).

Mar 06, 2011 | 1999 Ford Escort

1 Answer

I need to replace the serpentine belt on my car. How do I do that?


These instructions will help you . and also the picture below will help you more.
1
Locate the belt-routing diagram, printed on the fan shroud or possibly applied to the underside of the hood. This diagram shows you how to properly route the new belt, as well as identifying the location of the various pulleys, including the serpentine belt tensioner.
2
Move the belt tensioner off the Sable's belt using the serpentine belt tool. The tool connects to the side of the tensioner's arm and essentially acts as a handle for use in moving the tensioner. You can purchase a serpentine belt tool at most auto-part retailers.
3
Slip the belt away from the tensioner with your free hand and release the pressure on the tensioner with the tool. Pull the belt off the rest of the pulleys by hand and then remove it from the engine well.
4
Grab the old belt and new belt with one hand and put your foot through the other end of the belts. Stretch them both to their full length and check to ensure their both the same size. The old belt may have up to one-inch of extra length due to normal stretching that occurs during the belt's service life.
5
Wind the new belt, rib side to the pulley, around the crankshaft pulley. Consult the routing diagram and route the belt to the next pulley on the diagram. Continue to route and then check the diagram until you have the belt wound around every pulley except the belt tensioner pulley.
6
Double check to make sure the belt routes exactly as shown on the diagram and then move the tensioner aside once more so you can route the belt over the tensioner pulley as shown in the diagram. Move the tensioner back into place slowly and remove the tool.

Good luck

tgv1501_23.jpg




Jan 03, 2011 | 1996 Mercury Sable

1 Answer

A diagram for a 1999 Mercury Tracer serpentine belt to replace it


A person doesn't need a diagram to replace a serpentine belt.

Simply thread the belt around the pulleys alternating between smooth pulley to back of the belt, and the grooved pulleys to the inside of the belt, until the last pulley is the tensioner pulley, which is loosened using a breaker bar.

It really is that simple.

Aug 17, 2010 | Mercury Tracer Cars & Trucks

1 Answer

Change serpantine belt


The easiest way to change a serpentine belt is to go and buy a serpentine belt tool (Around $15-$20 at the auto parts store.) It's a long, flat wrench with bits that will fit most belt tensioners. The idea is to move the belt tensioner down, to allow the belt to relax so you can pull it off.
Once you have the belt off, follow the serpentine belt installation diagram on a sticker, located under the hood. Then, while pushing down on the belt tensioner, slip the belt on to the last pully and then slowly bring the tensioner back to tension. Double-check your belt routing with the belt diagram before starting your Grand Cherokee.

I hope this helps! :)

Jul 07, 2010 | 1998 Jeep Grand Cherokee

1 Answer

I need to know how to replace serpentine belt and tools needed for a 1995 Mercury tracer


You'll need some metric wrenches, 13-15mm. You'll need to locate the belt tensioner, which is spring loaded (pictured below) and use a wrench on the pulley bolt to release the tension on the belt (lift up, or push down). Make sure you note the routing of the belt, if no diagram is available.

24e5bce.jpg

May 16, 2010 | 1995 Mercury Tracer

1 Answer

I need a diagram of a how to install a serpentine belt on a 1998 Mercury Tracer with air.


1998 MERCURY TRACER - L4 2.0L 1989cc 122ci GAS FI N P

Belt Routing Diagram / Multiple Accessory, w/A.C.

8e6e46f.jpg


More details HERE

I hope help you (remember rated this help) Good luck.

Sep 18, 2009 | 1998 Mercury Tracer

1 Answer

1995 mercury tracer 1.9l wont start after new serpentine belt


The timing belt should not have been affwcted. Sounds like you have everything chk'd and accounted for.. The best way to chk the cam and crank is a compression test.

May 30, 2009 | 1995 Mercury Tracer

1 Answer

I need a routing diagram for a serpentine belt


i got the car fixed. my son, who is familiar with the car, came over and had the belt on in 20 minutes. thank you for your help.

May 17, 2009 | 1995 Mercury Tracer

2 Answers

Serpentine belt for 1998 mercury tracer


Hey there MSM,
  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator. The routing diagram is on one of the radiator supports.
  • The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Jun 05, 2008 | 1998 Mercury Tracer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...