Question about 2004 Ford Explorer

Open Question

Ford ba falcon not turning over lights on the dash turn on theirs power but it wont crank i tried the steering coloum tried the inhibitor switch still not starting

Ford ba not crancking over theirs power but no crank tried steering coloum inhibtor switch but nothing is working

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 726 Answers

SOURCE: Ford Falcon Futura AU II

the circle on the dash is smart lock..(ignition cut off like a kill switch immobilser) the only way to fix that is take it to ford or a macahnic its a module inside the ignition ,,,or the computers smartlock aint letting it go

Posted on Sep 25, 2008

  • 142 Answers

SOURCE: CAR WONT START ON FORD FALCON AU (AUTO)

sounds like battery not at full voltage, or an earth

Posted on Jan 25, 2009

  • 398 Answers

SOURCE: 1987 F150 302 ci. EFI, Automatic,

try over riding the starter relay on the fender ,it has one there right?. dont go to a mechanic yet. the engine aint seized. if it doesnt have this relay then i would get the alternator tested. if you want to test it yourself it can be costly for the right equip. autozone usually tests for free. i dont know were you live so if theres not an autozone. let me know if you cant get it tested.

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: ba falcon - wish to remove steering wheel

ave aproblem wit my air bag the light turn on and off quen you help me please

Posted on Mar 28, 2009

  • 1 Answer

SOURCE: ba falcon heater

Just had the same thing happen to my BA. No hot air. I'm a bit of a handyman so I had a go myself. 8 Hours is a reasonable estimate. You have to remove the steering column and entire dashboard to get the bugger out. Not a job I would attempt again.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No engine cranck, no warning lights


Check solenoid on starter motor.

A quick fix which works on occasion when solenoid hasn't completely failed is to strike the starter motor body with a hammer whilst trying to start.

Check power to solenoid with the key turned to crank position.

No power to solenoid? Check steering lock cluster, relay and fuses.

Do you have a flashing key on the instrument cluster? Change or re-program the ignition key


If you have no warning lights, no power to solenoid then check negative terminal fixing from battery.

If all is well, yet no crank, then replace starter motor and solenoid.

Oct 29, 2012 | 2005 Dodge Grand Caravan

1 Answer

When you turn key to crank dash light comes on but starter makes no sound. starter turns when you cross out cylinoid switch with screw driver.


could be safety neutral switch on steering coloum under dash will it start in neutral ? use a test light to see if you are getting power at the starter when you turn key if not check switch under dash pull the 2 wire connector off and put a paper clip in both wires and see if it starts

Mar 22, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer

Where is the ignition switch located?


Its a simple 5 or 6 pisition switch located on the steering coloum derrictly behind the key switch where you but the key into the lock cylinder and this needs to be removed to repace the ignition switch along with trim parts that cover the steering coloum . Idon't have a manual for your year but its alwas a bit tricky because they don't people to be able to pop the key switch out and steal your vehicle so there speical bolts that need to be drilled out or break off when tightened to a spisific torque . A nd its hard to test the switch unless its out of the vehicle well don't kill the mesinger i just told the truth

Feb 10, 2011 | 1998 Ford Expedition

3 Answers

Where can I get AC compressor for Matiz


I have ac compressor.and all spares of matiz.call 9096672837 or mail jayant_jay87@yahoo.com

Jan 12, 2011 | Daewoo Nubira Cars & Trucks

1 Answer

Where is the power steering fluid located in 96 ford explorer


The power steering runs off the fan belts so it has a pulley usely on the upper right side as you face the vehicle it depends on if you have ac or not but it hoses comeing up to it from the steering box thats at the end of the steering coloum that attaches to the steering wheel follow the coloum to the box then follow the hoses to the steering pump there will be a removable cap on it with a small dip stick that will say cold full and hot full on it put the fluid in there fill to level depending if its hot or cold And all ford power steering pumps tend to leak so don,t be alarmed if you have to add some from time to time see if you can get some fluid that has something called seal swell in it that will help to slow any leaks

Nov 29, 2010 | Ford Explorer Cars & Trucks

1 Answer

When steering wheel is adjusted the brake lights dont work,moving the tilt wheel fixes problem?


revove the covers on the coloum to expose turn signal switch! check the two plugs on the back!

Jun 12, 2010 | 2003 Ford Mustang

2 Answers

Headlights in 1990 ford bronco/full size


Bronco uses a RELAY switch under the hood. Is that what you replaced?

Swap it with the A/C RELAY switch (they are the same) to check it.

Sep 04, 2009 | 1990 Ford Bronco

2 Answers

How do i adjust an ignition switch on a ford f150?????


lossen up the two screws on the switch ,on the steering columturn the tumbler to acc , push or pull the switch accordingly then tighten the screws, thats it your done!!

Aug 31, 2009 | 1991 Ford F150

1 Answer

Cannot get the horn to work


hi.to get your horn working there is brass ring on the back ov the steering wheel.this needs to make contact with a pin on the steering coloum.

Jun 12, 2009 | 1996 Ford Escort 4 Door

Not finding what you are looking for?
2004 Ford Explorer Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...