An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: 2002 DODGE NEON - POPPED OUT OF 1ST, WILL GO IN...
You will need to have this Checked out by a Transmission shop. Inside the Top of the Tranny are slots for the Gear Selection. If one of these Gears looses a Tooth, It will Not go into Gear and the Gear will need to be Replaced.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have a vacuum leak! Somewhere on top (usually) you will find a vacuum line popped off. Perhaps knocked off accidentally by service man or procedure of some sort. The faster the idle, the bigger the pipe. Ck the line going from the intake manifold to the power brake booster ( Big drum right behind the master cylinder)
1st and 5th are the most stressed gears and the mitsubishi how ever fluid level and also adjusts ments are also possible issues i would check fluid levels as previously stated then adjust the shift cables becaause over time they do stretch and if it is stretched enough it will not allow a full engaement of the gears which can cause grinding or just no power if both of thos dont work look to internal parts like synchros a total shaft replacement will not be the case as the gears are paired on shafts but 1st and 5th are not paired together has there been anytype of work on or around the tranny
not sure on the set up of whether its rods or cables on this model for your gear linkages but sounds like one has either detached or broken which should be a relatively easy fix and not too expensive.Get a friend to move through gears while you look under to see whats moving and whats not.