Question about 2005 Nissan Frontier

Open Question

CHANGING SPARK PLUGS IN 2005 NISSAN FRONTIER 4 CYLINDER

HOW TO CORRECTLY REMOVE INTAKE

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mnabi01
  • 94 Answers

SOURCE: 1998 Nissan frontier: where is the ignition coil?

the coil is inside the distributor under the cap.

Posted on Jan 29, 2009

  • 1 Answer

SOURCE: remove windshield washer reservoir

Take off the wheel well shroud. Firdt remove the front right wheel, it will be easier. Then remove the two screws holding in the tank. Remove the two electrical connectons and small rubber hose. Next (or first) grab the filler tube and twist while pulling it from the tank as it is held in by a rubber gromet. Then pull the tank forward and let it drop down. Nothing else is holding it in except the two screws. Removing the filler tube is a must!

Posted on Apr 21, 2009

mcgyver468
  • 710 Answers

SOURCE: where do you put in freon 02 nissan frontier

In the engine compartment, look for two lines coning from the front of the vehicle. They are made of aluminum and one of them is larger than the other. Look for a cap that is blue in color, and has an L on it. While the car is running with the a/c on hook up the freon bottle to the service port. If you get the freon with the gauge on it, this will eliminate the possibility of overcharging. good luck

Posted on Apr 25, 2009

  • 580 Answers

SOURCE: I have a 2005 Nissan Frontier and my manual does

Your Nissan engine diagram with dipstck location
7ec4af0.jpg

Posted on Jul 29, 2009

  • 484 Answers

SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley

They are under the hood or on the front crossmember.

Regards,
matt

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nissan frontier 2005 light came on it says this code [ po305] cylinder 5 misfire. The 5th spark plug is not working. I have checked the compression, ignition coil, pressures, pistons, current and I


You will need a wiring diagram for this, but find the wires that run your cylinder 5 coil. trace it back to the ecm and see if you are getting voltage from the ecm.

Sep 29, 2014 | 2005 Nissan Frontier

1 Answer

Change spark plugs 2002 Nissan Frontier Supercharged


not a big deal, just use a wobble extension and take off the small bracket held on by 4 screws and use more than one extensins, use correct ngk and put new nissan wires too

Jul 14, 2014 | 2002 Nissan Frontier Crew Cab

1 Answer

I have a 2005 Nissan frontier, 6cyl. ,can't get to


Go to www.autozone.com and put in the make, model and year in the MY VEHICLES portion. Then look at the free repair guides. You can also call the dealer and speak to the service manager and get advice.

Sep 17, 2012 | Cars & Trucks

2 Answers

Need to know where number 3 spark plug is located on 2004 Nissan Maxima


What engine do you have in your Nissan that has the misfire, how many cylinders and how many liters???

Aug 03, 2012 | 2004 Nissan Maxima

1 Answer

Why is 2003 Nisan Frontier Super Charged truck smoking and 4th, 5th, and 6th cylinders not firing after spark plug change? Put old spark plugs back in no change


If the engine is smoking and you have misfires on three cylinders, this is not a good thing. The best course of action at this point would be to pull all the spark plugs out and perform a compression test to help evaluate the extent of the damage.

Oct 08, 2011 | 2003 Nissan Frontier Crew Cab

2 Answers

Can not find the back spark plug hole


if you go down right beside the intake manifold you will be able to get to it

Sep 09, 2011 | 2000 Nissan Xterra

2 Answers

What is the best way to reach the rear spark plugs on a 2005 dodge stratus 2.7L 6 cylinder


Hi.

Three of your spark plugs are located underneath the intake mainfold. The intake mainfold must be removed to allow access to the spark plugs. The mainfold must be reassembled using correct torque settings. Please refer to diagram. Below the diagram. Click on the picture to enlarge:

ginko_307.gif

Regards.

Ginko

Sep 06, 2011 | 2005 Dodge Stratus

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

1 Answer

Electrical problem


If the spark plugs are burning all the time it means youe getting too much fuel to the engine, check your fuel filter and replace if needed.

Jun 23, 2009 | 2005 Nissan Frontier

1 Answer

Nissan frontier 2005 won't star


when you check for spark check all cylinders u can use a regular spark plug and wire ground the plug end set the gap a little higher than veh calls for then yuoll know if it can have enogh to run all cylinders if you find only 2-3 firing thats still considerd no spark. hope this helps THUNDERBOLTZ

Jun 14, 2009 | 2005 Nissan Frontier

Not finding what you are looking for?
2005 Nissan Frontier Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...