Question about 2008 Mercedes-Benz S-Class
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Its probably not a fuse issue as that would affect both sides.
when you replace a blub especially the brake lights it is possible to deform that nice flat panel of metalic strips and if you look carefully it sometimes breaks the plastic pins on which it sits, this causes poor connection to the functional bulb, the soloution is easy, get a small piece of card and fold it over till its about 2-3 mm thick then wedge it behind the panel of strips (top outside corner for brake light) and hey presto the light should work again, top tip use an umbrella and the electric seat to make sure the brake pedal is deppressed to check if alone.
Posted on Apr 30, 2009
First of all may i say i feel your pain. literally. the same thing happened to mine. here is what i did
Firstly i needed into a locked boot urgently (for wifes wheelchair)
so i cut a rectangle out of the boot put my hand in and pulled the release mechanism, that worked but left me with a hole in my boot.
I suggest that you try this instead.
remove back seat
the central locking pump is located next to the battery (black box with yellow air lines going into it.)
Unplugg the filler cap cover air line, then unplugg the boot air line and put it into the filler cap cover socket.
now when you unlock the car the boot should automatically open.
If it does not the problem it on the boot air line and you should strip the trim out of the boot to check, but you still have to get in and may have to do what i did initially.
If changing the air line worked then you will soon get tired of having to shut the boot everytime i solved this problem by routing the filler cap air line to a pnuematic switch (LEGO) This switches between the boot and the filler cap. bit naff but it works and cheaper than having to replace pump and have computer and keys re-coded total cost around £600.
op that helps
Posted on May 01, 2009
Posotive can be found in hood driver side next to fuse box. It is a small rectangle box. You can hook negative to any solid ground on the car.
Posted on Jun 14, 2009
Starter motor on this car is imposible to get to..better find the post forward of the drivers side fuse box in the engine compartment where a bunch of wires come together. This is a positive terminal attach red jumper here put the negative jumper on any bare metal bracket of the engine
Posted on Aug 14, 2009
Tips for a great answer:
Nov 11, 2015 | 2011 Buick Regal CXL
Feb 28, 2015 | Mercedes-Benz Cars & Trucks
Aug 24, 2011 | Mercedes-Benz E350 Cars & Trucks
Mar 16, 2011 | 1998 Mercedes-Benz C-Class
Jan 19, 2011 | Mercedes-Benz C230 Cars & Trucks
Dec 31, 2010 | 2009 Mercedes-Benz E-Class
Mar 30, 2010 | 1999 Mercedes-Benz C-Class
Mar 06, 2009 | 2003 Mercedes-Benz E-Class
241 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: