Question about 2006 Ford Explorer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Oct 16, 2009
By law, headlighs have to vbe set up by an authorised institution who will have the necessary equipment and regulations. This is not a costly process.
Posted on Jan 16, 2011
Tips for a great answer:
Aug 29, 2011 | 2007 Ford F
Jan 16, 2011 | Ford F Cars & Trucks
Jul 08, 2017 | 2007 Ford Focus (3 Door) Hatchback
Oct 16, 2009 | 2007 Ford Fusion I4 SEL Sedan
Jul 30, 2009 | 2003 Ford Explorer Sport Trac
Oct 29, 2008 | 2007 Ford F
Sep 20, 2008 | 2005 Ford Freestar
341 people viewed this question
Usually answered in minutes!