Question about 1996 Ford F150 Regular Cab

Open Question

Grease points on 1996 ford f150 - 1996 Ford F150 Regular Cab

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does hydraulic slave cylinder bearing need greasing?

Hi Sheila:
The clutch slave cylinder pushes against a throwout arm
The throwout arm is a lever and it pushes against the throwout bearing which thenpresses against the clutch plate and dis-engages the clutch.
Throwout bearings are typically sealed units that last until they fail, at which time they get replaced.
You should not have to worry about greasing it.
Hope this helps.

Jan 27, 2016 | 1996 Ford F150 Regular Cab

1 Answer

2004 ford f150 turn signals not working .. flashers come on ..fuses okay

You 2004 Ford F150 use OEM 3157 bulbs.
Inside these bulbs,there are TOTAL of TWO bulb filaments.
When one of the two burned out,it will cause turn signal problem.

Stock up with 4 bulbs before you start.
Auto part store sell then is pair.
I recommend you replace then in part and save the good on for emergency.
I attached a photo of the 3157 bulb below.
As you can see there are two filaments inside the bulb.
Check the bulb one by one and you will get the signal system working.
==== There are protective grease inside the base of the socket.
Make sure it's not blocking the four contact points (both side of the socket). ==== mustgo_1.jpg

Jan 05, 2011 | 2004 Ford F150

1 Answer

Whenever it rains, my truck is very hard to start. After I do get it started, it runs very rough until the engine gets up to normal operating temperature.

Cheap easy suggestion is to replace the spark plug wires with some good quality ones and put that sealing grease around the ends to keep moisture out of the connections.

Sep 20, 2010 | 1996 Ford F150 Regular Cab

1 Answer

Need the plug wire diagram for a 1996 ford f150 4.2 v-6

For the Ford F150 4.2L V6:

Firing Order:
1 - 4 - 2 - 5 - 3 - 6

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Jul 06, 2010 | 1996 Ford F150 Regular Cab

5 Answers

What is the firing order for a 1996 ford F 150

1996 Ford F 150 2WD Pickup
4.9 liter L6

1996 Ford F 150 2WD Pickup
5.0 liter V-8
1996 Ford F 150 2WD Pickup
5.8 liter V-8

Jan 25, 2010 | 1996 Ford F150 Regular Cab

1 Answer

How to replace 1996 ford f150, steering box,

pin point the leak and replace seal. I have not seen to many of these needing replacement. Usually it is a seal or hose leaking. I think in the past 15 yrs I may have replaced a total of 4 or 5.

Sep 17, 2009 | 2004 Ford F150

2 Answers

1996 ford f150 blinkers don't work

Hi, Fuse #7. See diagram of power distribution. It could be your multi-function switch or ele. flasher. MFS failures are more common.


Dec 20, 2008 | 1996 Ford F150 Regular Cab

1 Answer


i am looking for a diagram for 1996 ford f-150 for the spark plugs.

Jul 31, 2008 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
1996 Ford F150 Regular Cab Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides