Question about Cars & Trucks

Open Question

Handbrake button is stuck in shaft on VW POLO

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1071 Answers

SOURCE: Anti Braking Light Bleeping -VW POLO 2001

abs control module could be bad or wheel speed sensors but if the light goes out on its own id say the module

Posted on Jul 27, 2009

  • 1071 Answers

SOURCE: can you adjust polo rear brakes at the wheels or

hand brake is the only way to adjust them properly you can adjust them at the wheels but you will need to remove the drums then if adjusted too far drums may not go back on

Posted on Aug 19, 2009

  • 819 Answers

SOURCE: I need to replace the rear brake pads on my Polo 1.9 TDi

this is a turn in caliper, meaning that as you try to compress the piston, you also need to rotate it clockwise. you can buy tool for this at nearly any parts store, and is fairly inexpensive.

Posted on Dec 28, 2009

Testimonial: "Thank you for your assistance. I found out the turning piston part by mistake, a day after I posted the question, when I tried to use a G-Clamp."

smhb1
  • 146 Answers

SOURCE: crankshaft sensor for vw polo where is the

Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a vw polo 2002,when stuck in traffic or after long drive,the ar goes off


does the temp gauge reach the red area? check eng coolant .Over heating could cause eng to cut out so as not to cause more damage check the cooling system.When travelling slowly or at stand still turn heater to max heat and max speed this will cool eng but is only a temporary solution

Mar 26, 2014 | 2002 Volkswagen GTI

1 Answer

Handbrake light stays on


I am going to hope these two items are related.
First the handbrake.
On most cars, it works like this. ( Wish I could say that for VW !)
The handbrake lever or pedal has a very small switch, about the size of your little finger, located in a place near the lever or pedal so that, when you push the pedal or pull the lever, the little switch has a button inside it that is released to come out, and that turns on your light, telling you the brake is on.
It is a "push button" switch.
When you release the pedal or the brake lever to normal position, the button is pushed back into the switch turning off the light.
I suspect you have a lever between the seats.
It will be surely hard to find the switch, as it likely is down inside the console.
If yours has the pedal under the dashboard, it is much easier to find, as you should be able to see it way up under the dashboard near the top of the emergency brake pedal.
The switches are usually only a few dollars, unless you go to a car dealer, and the labor can be high.
Oh yes, sometimes the switches are made of cheap plastic, and they can actually break or fall out of their socket !
I think the beeping may just be an audible reminder of the switch problem.
Be Blessed.

Feb 02, 2013 | Volkswagen Polo Cars & Trucks

1 Answer

On my vw golf 1998 handbrake is stuck in the floor, I cannot move it, what do I do?


push the button and pull at the same time, lube all moving parts, may need to adjust or replace the cable.

May 21, 2012 | 1998 Volkswagen Golf

1 Answer

My VW Polo 1.4 will not pull due to the handbrake being stuck, I have tried rocking it but still not budging. The hand break lever seems to be working as normal so I feel that the cable is still tort.


if the car has been standing for awhile,try putting it in reverse and drive about 10 feet backwards,it may free off.if not try with 2 people sat in the back(to add weight to the rear)then rock it/reverse.if not get back....

Aug 27, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

Vw polo camshaft & tappets removal 1.4 1998


do u have to take head of to replace cam shaft out on 1.4 belt drivern polo

Jun 10, 2010 | 1998 Volkswagen Golf

1 Answer

I need to replace the rear brake pads on my Polo 1.9 TDi


this is a turn in caliper, meaning that as you try to compress the piston, you also need to rotate it clockwise. you can buy tool for this at nearly any parts store, and is fairly inexpensive.

Dec 28, 2009 | Volkswagen Jetta Cars & Trucks

1 Answer

Can you adjust polo rear brakes at the wheels or only on the handbrake cable (the car is a vw POLO and not a jetta?


hand brake is the only way to adjust them properly you can adjust them at the wheels but you will need to remove the drums then if adjusted too far drums may not go back on

Aug 19, 2009 | 1997 Volkswagen Jetta

1 Answer

ABS Light on constant & Handbrake Icon flashes and makes noise


Have a code scan done. Most lightly problem is one of the wheel sensors is faulty or dirty from brake dust. As for the noise, check brake pad wear on all 4 wheels
John

Aug 08, 2009 | 2002 Volkswagen Golf

1 Answer

Anti Braking Light Bleeping -VW POLO 2001


abs control module could be bad or wheel speed sensors but if the light goes out on its own id say the module

Jul 27, 2009 | 2002 Volkswagen Golf

2 Answers

1996 Subaru Legacy L Wagon: Handbrake button is stuck in shaft.


this is generally a failure in the hand brake assembly itself.Pulling the center console will reveal the mechanism that locks the brake cable in the unit.You probably will notice its inability to hold in this area which will necessitate replacement .

Jul 23, 2009 | 1996 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...