Question about Cars & Trucks

Open Question

Land rover LR2 power seat 5 amps fuse blow up sometimes fews minutes after I change it, sometimes one week after. what is the solution to fix this ?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 246 Answers

SOURCE: my seats just died on my new LR2

there are connectors on the back side of the switch panel on the bottom side of the seat, but the plastic trim panel is a pain to take off. you can check to see that all is still plugged in and nothing came unplugged accidentally. odds are that your module will need to have some updated software downloaded by the dealer. i feel your pain though, i was one of many of land rover's technician layoffs!

Posted on Feb 17, 2010

c1apton15
  • 3400 Answers

SOURCE: how to reset oil service meter 2008 land rover lr2

You need to have it reset by dealer or someone who has OBII scanner (fault scanner) Autozone, Advance & other auto parts stores can do it for you.

Posted on Jan 07, 2011

alicantecoli
  • 22095 Answers

SOURCE: i need the location for

looked in my bible and i cannot find this number but the later models are all under the passenger side dash behind the glove box but some are showing in the middle of the bulkhead under the wiper mechanism ,hope this helps

Posted on Apr 21, 2011

  • 7 Answers

SOURCE: 96 mustang gt ac blows fuse after 5 minutes.

it sounds to me like a AC resistor issue i have a beemer that did that same thing to me and it turn out that it was my ac resistor it would burn out my 30 amp ac fuse in 2 to 3 minutes usually when the resistors in a circuit break they tend to burn out the fuses as a warning. easy way to find out is by putting in a new fuse and after a minute go touch the negative lead on you battery if the cable is really hot then there's a short in the circuit or in the case of your ac it would be a broken resistor.
http://www.oreillyauto.com/site/c/search/Blower+Motor+Resistor/02627/C0331.oap?make=Ford&model=Mustang&year=1995&vi=1134166
there simple to get and simple to replace.

Posted on Jul 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2012 land rover lr2 with dead battery. how do i get into neutral so I can get it to somewhere I can jump it


Check your owners manual. I am not familiar with your exact vehicle, but most all come with an shift interlock override that will allow you to shift out of park without power.

Oct 10, 2015 | 2012 Land Rover LR2

1 Answer

How to chang starter on 2008 lr2 land rover engine


Why do you want to change the starter? Check out the earth strap before doing anything expensive. Then get a hammer and tap around the solenoid (the small cylinder fixed to to the starter) because rust can cause failure) and that may work for some time. If you must change the starter, DISCONNECT the battery first. Then LABEL the electrical leads and note where each is attached to the starter and solenoid. The starter requires only two bolts to be removed and the whole unit slides forwards out of the housing. Replace exactly the same way.

Aug 09, 2014 | Land Rover LR2

1 Answer

How do you fix sunroof 2009 land rover lr2


have you checked the fuse ? if ok check that power is getting to and from switch , if ok check that power is getting to the motor , will have to remove the switch cover etc let me know how you get on

May 13, 2014 | 2008 Land Rover LR2

1 Answer

Range rover 3,9 1990 runs on lpg but will not run on petrol


check all fuses think fuse for pump is under drivers seat on uk models. If fuse ok check for power and earth at the connection on fuel pump. if power and earth possible fuel pump.

Mar 06, 2014 | 1990 Land Rover Range Rover

1 Answer

How do I change the battery in the key chain (LR2 model)?


How do I change the key battery in my Land Rover LR2 HSE 2009 model?

Jan 01, 2012 | Land Rover LR2

1 Answer

The radio haves a short it works sometimes . some one told me i have a blowed amp. how do i fix it?


This can be a common problem if you take your car off road and water gets into the cabin. The amp is underneath the passenger seat. The seat has to be removed to get to the amp. Aftermarket amps are generally not compatible with the factory sound system, so you will need to get a replacement amp made specifically with your car.

Aug 23, 2011 | 2003 Land Rover Range Rover

1 Answer

How to reset oil service meter 2008 land rover lr2


You need to have it reset by dealer or someone who has OBII scanner (fault scanner) Autozone, Advance & other auto parts stores can do it for you.

Jan 07, 2011 | Land Rover LR2

1 Answer

How to replace LR2 Third Brake Light


The Freelander is Land Rover's entry-level crossover SUV. Unlike other Land Rover vehicles that use a traditional "truck," body-on-frame chassis, the Freelander is built on a unibody, front-wheel drive car chassis. The Freelander is sometimes known in the U.S. as the "LR2."

1 Purchase replacement bulb P21/5W, available at most auto parts stores and at any Land Rover
dealer.

2 Turn off engine and open rear cargo door.

3 Remove the two Torx screws from the side of the tail light assembly. Carefully pull the assembly
away and unplug the electrical harness.

4 Turn the assembly over to access the bulb modules. There are three separate bulb modules; the
top module should be the brake light.

5 Rotate the bulb module counterclockwise to release it from the tail light assembly. Push the bulb
down (into the module) and turn it counterclockwise to remove it from the module.

6 Insert the new bulb into the bulb module. Carefully push the bulb down and turn it clockwise.
Reinsert the bulb module into the tail light assembly and turn it clockwise.

7 Reconnect the electrical harness to the tail light assembly. Remount the tail light assembly and
replace the Torx screws.


Dec 26, 2010 | Land Rover LR2

1 Answer

My seats just died on my new LR2


there are connectors on the back side of the switch panel on the bottom side of the seat, but the plastic trim panel is a pain to take off. you can check to see that all is still plugged in and nothing came unplugged accidentally. odds are that your module will need to have some updated software downloaded by the dealer. i feel your pain though, i was one of many of land rover's technician layoffs!

Aug 16, 2009 | Land Rover LR2

2 Answers

Where is the DVD player for the sat nav system in a Freelander 2


look in the trunk,sometimes mounted on the upper inside

Nov 19, 2008 | 2007 Land Rover LR2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...