Question about 2001 Saab 9-3

Open Question

I have codes p1312 and 1334 are coming up what does these mean?

My check engine light is on and I'm getting codes p1312 and p1334 what does these codes mean?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: just had obd2 readding as eml comes on

CODE P1312 -COMBUSTION DETECTION CYLINDER 1 2 OPEN CIRCUIT SHORT TO B+ POSSIBLE CAUSE -CHECK OUT PUT SIGNAL FROM CONTROL MODULE- CHECK FOR POOR CONTACT IN CONTROL MODULE CONNECTOR- CHECK HARNESS BETWEEN MODULE AND CONTROL MODULE. CODE P1334 -COMBUSTION DETECTION CYLINDER 3 / 4 OPEN CIRCUIT SHORT TO B+.YOUR POSSIBLE CAUSE IS THE SAME AS P1312.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a saab 93 2002 with engine codes,p1110,p1312 and p1334 showing can anyone please tell me what they mean!


CODES P1312 AND P1334 These codes are related to the DI Module. Check the DI Module. Replace it if needed and clear the codes.

CODES P1110 Code P1110 is related to the Turbo Bypass Valve, check the vacuum lines at the Bypass Valve and especially at a vacuum sensor mounted on the firewall driver's side. The lines become loose with age and will pop off or can become disconnected when someone is reaching behind the for other reasons.

Jun 03, 2015 | 2005 Saab 9-3 2.0

1 Answer

P1334 code, what next?


No such DTC for that year and model

Feb 26, 2015 | 2000 Saab 9-5

1 Answer

Failed smog: P1334 code only (no P1230)


If this is a SAAB the DI cassette needs replacement. Easy fix but the part is high. Use only OEM part as the cheap stuff does not work. Plugs are under this unit so good time to replace them also.

Feb 26, 2015 | Cars & Trucks

1 Answer

Engine light on get it check and the code is p0420,p1334 the car is a 95 and 2001


p0420=catalyst system efficiency below threshold.p1334=poor combustion cylinders 3&4. Points to DI cassette.

Apr 17, 2014 | Saab 9 Cars & Trucks

1 Answer

My Ford Taurus Failed the inspection, we have replaced 1 oxygen sensor, but the reading still failed. Went to the Autozone & & did a reading came up with two codes P0430 & P0125, is this to...


PO125 means the ECM sees the engine is too cold to go into closed loop and runs rich for too long.
PO430 means the ECM doesn't like what it sees coming out the exhaust.
I would check the thermostat and make sure the engine is getting up to 195-200 degrees after 5 or 10 min of drive time, and if it is then check the temp sensor for the ECM to make sure it is reading the engine temp correctly.
Fixing the code 125 should take care of the code 430.

Jun 24, 2012 | 2001 Ford Taurus

1 Answer

My 98 V6 has trouble starting... Its not the Battery, Battery Terminals, Spark Plugs, Spark Plug Wires, Coil Pack or Alternator... I've replaced them all within the last month. I've also done Oil,...


Your readiness test will allow your PC to reset & if u are going to get a check engine light that's going to come that's the time it will come on, after the "readiness road test" Take it out & dive high & low speeds. If that light is to come on it will.

Mar 20, 2017 | 1998 Ford Mustang

2 Answers

My 1999 grand caravan showed codes p1782 & p0700,& it is acting fine & th check engine soon light went off on its own. is there a problem?


p0700 means there is a code stored in the tcm ( transmission control module). P1782 is 2-4 pressure switch sensor sense. This could be just a bad connection or a bad solenoid pack. Many times itis the beginning of the end.

Jan 23, 2011 | 1999 Dodge Caravan

2 Answers

Check engine light comes on. odb2 code P2096 What does it mean


WHAT EXACTLY MEANS THE CODE P2096 AND HOW I SHOULD FIX IT CRYSLER 300 2010

Apr 24, 2010 | 2005 Chrysler Town & Country

1 Answer

Just had obd2 readding as eml comes on intermitantly codes p1312and p1334 what do they mean please


CODE P1312 -COMBUSTION DETECTION CYLINDER 1 2 OPEN CIRCUIT SHORT TO B+ POSSIBLE CAUSE -CHECK OUT PUT SIGNAL FROM CONTROL MODULE- CHECK FOR POOR CONTACT IN CONTROL MODULE CONNECTOR- CHECK HARNESS BETWEEN MODULE AND CONTROL MODULE. CODE P1334 -COMBUSTION DETECTION CYLINDER 3 / 4 OPEN CIRCUIT SHORT TO B+.YOUR POSSIBLE CAUSE IS THE SAME AS P1312.

Jul 26, 2009 | Saab 9 3 Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all 2001 Saab 9-3 Questions

2001 Saab 9-3 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...