Question about Cars & Trucks

Open Question

Codes from a 2001 saab 93 1312 and 1334

The codes p1312 and p1334 are coming up for my check engine light what does these mean?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 13 Answers

SOURCE: 2001 Dodge Caravan/check engine light

P0442--Evap Emission Sys. leak detected small leak
P0455--Evap Emission sys. leak detected gross leak
P0456--Evap Emission Sys. leak detected very small leak

Posted on Jun 11, 2008

Ad
Mongo32
  • 111 Answers

SOURCE: check engine light comes on

"po455 large leak" means that you are not maintaining positive pressure in your fuel system. Have a mechanic do a "smoke test" on the fuel system. Could be as simple as a loose gas cap...

Posted on Jun 01, 2009

Murphybanton
  • 2004 Answers

SOURCE: 2001 Kia Optima

P1529 and P0720 does not seem to be understood.

P0715 means Input/Turbine Speed Sensor Circuit Malfunction.

P0118 means Engine Coolant Temperature Circuit High Input.

For more understanding visit:- http://www.troublecodes.net/Kia/

Cheers.

Posted on Aug 08, 2009

ajarema
  • 404 Answers

SOURCE: my check engine light on my 2001 hyundai accent gl

Most of the time they mean:
p0441 = Evaporative Emission System Incorrect Purge Flow
p0422 =
Evaporative Emission Control System Leak Detected (small leak)

MOre info at http://www.obd-codes.com/p0442

Posted on Jan 10, 2010

elshaddai159
  • 1016 Answers

SOURCE: I have a Saab 9-3 TDi 2001. The engine warning

Hi
If your engine warning light has come on this is indicating there in a serious problem and the limp mode has been switched on to safe guard the engine. It could be a number things, but I'll give you some basic things to look at which may help you.

  1. Check all fluids are are the correct levels - engine oil, radiator water level in overflow tank usual beside the radiator.
  2. Also check transmission fluid level if it is an automatic, from the dipstick.
If all these are ok then check these areas:
  1. Air Filter and housing has no blockage.
  2. Fuel filter may need replacing or water separator is filled with water, loosen valve at the bottom of fuel filter and drain the excess water. Fuel should not come out just water if there is any.
If all these are ok then there is a problem regarding sensor faults, fuel pump timing, and further in depth diagnosis will be needed. Hope this is helpful, let me know how you get on.

Jason

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a saab 93 2002 with engine codes,p1110,p1312 and p1334 showing can anyone please tell me what they mean!


CODES P1312 AND P1334 These codes are related to the DI Module. Check the DI Module. Replace it if needed and clear the codes.

CODES P1110 Code P1110 is related to the Turbo Bypass Valve, check the vacuum lines at the Bypass Valve and especially at a vacuum sensor mounted on the firewall driver's side. The lines become loose with age and will pop off or can become disconnected when someone is reaching behind the for other reasons.

Jun 03, 2015 | 2005 Saab 9-3 2.0

1 Answer

P1334 code, what next?


No such DTC for that year and model

Feb 26, 2015 | 2000 Saab 9-5

1 Answer

Failed smog: P1334 code only (no P1230)


If this is a SAAB the DI cassette needs replacement. Easy fix but the part is high. Use only OEM part as the cheap stuff does not work. Plugs are under this unit so good time to replace them also.

Feb 26, 2015 | Cars & Trucks

1 Answer

2003 saab 95 aero misfire


I see no one else has posted an answer for you here yet so I will take a stab at it for you. The P1300 codes I am familiar with on the Saab's are P1334 and P1312 which almost always means the ignition cassette is failing. Most of the time the car will still run good, at least at first anyway getting worse over time. They are not cheap, ebay has the lowest prices and most availability that I know of. They are very easy to replace, just one electrical connector and four large torx screws right on top of the engine. If you have a black one replace it with black, red with red. To be absolutely sure you get the right one it's best to match part numbers. That being said most of the ones I have used have been interchangeable as long as they are the same color & # of cylinders.
7_14_2014_4_12_05_pm.jpg

Jul 12, 2014 | 2000 Saab 9-3 Viggen

1 Answer

Engine light on get it check and the code is p0420,p1334 the car is a 95 and 2001


p0420=catalyst system efficiency below threshold.p1334=poor combustion cylinders 3&4. Points to DI cassette.

Apr 17, 2014 | Saab 9 Cars & Trucks

1 Answer

Got a check engine light on with OBD2 reading P1312 have no idea what it is?


P1312. I think its the DERECT IGNITION CASSETTE. and it cost like $200 At the dealership. Good luck

Dec 07, 2010 | 2003 Saab 9-3

1 Answer

Just had obd2 readding as eml comes on intermitantly codes p1312and p1334 what do they mean please


CODE P1312 -COMBUSTION DETECTION CYLINDER 1 2 OPEN CIRCUIT SHORT TO B+ POSSIBLE CAUSE -CHECK OUT PUT SIGNAL FROM CONTROL MODULE- CHECK FOR POOR CONTACT IN CONTROL MODULE CONNECTOR- CHECK HARNESS BETWEEN MODULE AND CONTROL MODULE. CODE P1334 -COMBUSTION DETECTION CYLINDER 3 / 4 OPEN CIRCUIT SHORT TO B+.YOUR POSSIBLE CAUSE IS THE SAME AS P1312.

Jul 26, 2009 | Saab 9 3 Cars & Trucks

2 Answers

Hi, I have a 2000 Saab 93. The engine light is on. I took it to have the codes read and they came up with two,p1334 and p1312. They said they were dealer codes so they could not tell me the problem . They...


P1312 is ignition coil knock detection cyl 1 and 2 and the cause is quoted as wiring open circuit/short to positive, ignition coil assy, ECM.
P1334 is as 1312, but cylinders 3 and 4.

The other thing to that would cause detonation too is low fuel octane causing detonation during acceleration. Or dirty fuel injector and dirty fuel filter. Timing would cause this but i don't think your timing is off since you can get it started. Recap, add fuel injector cleaner to your gas tank for the next 3 fill ups and try using a higher octane rated fuel like 91 and replace the fuel filter for now and see if there are any improvments. keep me posted, be glad to help.

Jun 25, 2009 | 2000 Saab 9-3 Viggen

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...