Question about Honda Cars & Trucks
2002 honda civic ex automatic
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 honda civic ex sedan
remove rear seat, remove round metal cover, disconnect fuel lines and wires from top of fuel pump, jack up rear of car. remove gas tank straps, lower gas tank with a jack, install is reverse.....if you need to just replace the fuel pump you don't have to remove tank you Can access from under rear seat good luck and please rate -jeff
Posted on Sep 05, 2008
Your speed sensor, is located on top of the transaxle, near the starter. To access it, remove the battery, then remove the battery tray (4 10mm bolts). You will see wires coming from the lower oxygen sensor, and they snap into the bracket that holds the speed sensor in place. The actual speed sensor has a 2 wire clip on it, and is held in place by the bracket and a 10mm bolt.
Posted on Apr 20, 2009
The input/turbine speed sensor has nothing to do with the turbo. It is transmission related and is a circuit malfunction. I am having the same problem and it causes my car to downshift into 3rd gear (computer's fail safe gear) on the highway. The sensor is located above the transmission housing, and doesn't require you to take apart the tranny. I am having trouble finding the part number for this and where to buy it. Any help would be nice.
Posted on Jul 27, 2009
the code 0715 is Mainshaft speed sensor, check the sensor see any loose connection or replace the sensor . After replace the sensor, reset the the system. Hope this can help.
Posted on May 30, 2010
With the ignition off, press and hold the odometer reset button in. While holding it in turn the ignition switch on but do not start the engine. After around 5-10 seconds the maintenance required light will reset.
Posted on Jun 19, 2010
Tips for a great answer:
Feb 21, 2015 | 1997 Honda Accord
Jul 15, 2014 | 2002 Honda Civic
Jun 16, 2014 | 2001 Mitsubishi Mirage
Apr 05, 2010 | 1997 Honda Civic
Mar 18, 2010 | 1997 Honda Civic
Sep 02, 2009 | 1997 Honda Civic
May 04, 2009 | Honda Accord Cars & Trucks
Apr 08, 2017 | 1999 Honda Civic
Mar 01, 2009 | 1995 Honda Civic
74 people viewed this question
Usually answered in minutes!