Question about 2004 Buick LeSabre

1 Answer

2004 LASABRE CRUISA CONTOL SWITCH SETTING SPEED ON STEERING WHEEL

CANNOT SET SPEED CONTROL

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Buick Master
  • 60,775 Answers

Check and verify the cruise servo under the hood has vacuum from the engine source port on the intake manifold

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cruise control fuse located?


In the SJB - smart junction box , Under the dash ! There are three fuse's - F2.27 10amp - F2.32 10amp - F2.17 15amp . Is your air bag light lit ?
SECTION 310-03: Speed Control 2004 Taurus/Sable Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 07/02/2003 Speed Control The vehicle speed control system consists of the following components:
  • Brake pedal position (BPP) switch
  • Speed control actuator cable
  • Speed control switches
  • Speed control deactivator switch
  • Speed control indicator
  • Speed control actuator
  • Smart junction box (SJB)
NOTE: The clock spring provides the electrical interface between the steering column wiring and the speed control switches in the steering wheel.
The inputs to the speed control actuator are:
  • Vehicle speed signal
  • Speed control switches
  • Brake pedal position (BPP) switch
  • Deactivator switch
The outputs of the speed control actuator are:
  • Speed control indicator lamp
  • Speed control actuator cable controlling the throttle position

Apr 01, 2016 | 2004 Ford Taurus

1 Answer

Cruise control stop working light dont show on dash can a fuse be out if so where is it located


There are three fuse's in the smart junction box , do you know where it is ? It's under the dash panel left side ! The fuse's are F2.27- 10amp , F2.32 - 10amp , F2.17 - 15 amp . They power the speed control servo ! Maybe the control switch's on the steering wheel don't work.
A little back ground on the system ! Speed Control The vehicle speed control system consists of the following components:
  • Brake pedal position (BPP) switch
  • Speed control actuator cable
  • Speed control switches
  • Speed control deactivator switch
  • Speed control indicator
  • Speed control actuator
  • Smart junction box (SJB)
  • Principles of Operation
    The speed control system is designed to maintain vehicle a set speed above 48 km/h (30 mph). After the speed control ON switch is pressed, pressing the speed control switch SET/ACCEL will activate the speed control actuator. To increase a set speed, either press and hold for continuous acceleration, or momentarily tap the speed control switch SET/ACCEL for 1.6 km/h (1 mph) acceleration increments. To decrease a set speed, press and hold the speed control switch COAST until the target speed is reached, or momentarily tap the speed control switch COAST for 1.6 km/h (1 mph) deceleration increments. When the speed control system has been disabled by tapping the brake pedal, the speed control switch RESUME can be pressed and the vehicle will return to the original set speed if the vehicle is traveling over 48 km/h (30 mph) and the speed control switch OFF has not been pressed.
    NOTE: The deactivator switch is provided as an additional safety feature. Normally, when the brake pedal is pressed, an electrical signal from the brake lamp circuit to the speed control actuator will deactivate the system. Under increased brake pedal effort, the deactivator switch will open and remove power to the speed control actuator, releasing the throttle independently of the speed control actuator.
    NOTE: The clockspring provides the electrical interface between the steering column wiring and the speed control switches in the steering wheel.
    The inputs to the speed control actuator are:
    • Vehicle speed signal
    • Speed control switches
    • Brake pedal position (BPP) switch
    • Deactivator switch
    The outputs of the speed control actuator are:
    • Speed control indicator lamp
    • Speed control actuator cable controlling the throttle position
    • Inspection and Verification
      NOTE: If any concerns are noted with the speedometer, stoplamps, or horn, address those concerns by referring to the appropriate sections before continuing speed control diagnosis.
      1. Verify the customer concern by operating the speed control system.
      1. NOTE: Any aftermarket modifications, including but not limited to those listed below, may cause the speed control to not operate correctly:
        • Any wiring or lamp modifications affecting the brake lamp operation
        • LED brake lamps
        • Non-factory installed trailer wiring
        • Radios (speed sensitive, auto mute)
        • Remote starters and alarms
        • Lighting and electrical accessory modifications
        Visually inspect for obvious signs of mechanical or electrical damage:
        • Visually inspect the speed control actuator and accelerator controls.
        • Visually inspect the speed control cable without removing it and ensure smooth cable operation. Inspect the speed control cable connection to the throttle body.
        • Visually inspect the accelerator cable without removing it and ensure smooth cable operation. Inspect the accelerator cable connection to the throttle body. Also check for cable interference with the carpet, bulkhead grommet, insulation and instrument panel wiring.
      1. Visually inspect for obvious signs of mechanical and electrical damage.
      2. Visual Inspection Chart Mechanical Electrical
        • Speed control actuator cable
        • Throttle linkage
        • Battery junction box (BJB) fuse(s):
          • 4 (40A)
          • 12 (60A)
        • Smart junction box (SJB) fuses:
          • 14 (15A)
          • 57 (10A)
        • Wiring harness
        • Loose or corroded connections
        • Deactivator switch
        • Brake pedal position (BPP) switch
        • Speed control switches
        • Powertrain control module (PCM)
        • Speed control actuator
        • Bulb

Mar 14, 2015 | 2007 Ford Taurus

1 Answer

How can i activate my cruise control in my 2004 grand cherokee


The cruise control switches are located on the steering wheel. When the cruise control is turned on there will be a green light luminated on the dash that says "cruise". When at the desired speed press "set" to set the cruise control at that speed.

Oct 09, 2010 | Jeep Cherokee Cars & Trucks

3 Answers

How do I turn the cruise control on in a 2004 ion?


Use the cruise control on/off switch and set it to ON. Then momentarily hit the set/coast switch and that should do it. I believe everything is located on the steering wheel.

Jul 24, 2009 | 2004 Saturn ION

2 Answers

My brother just bought a 2004 Lincoln Town Car Signature.....I helped him find this car and he now tells me that the cruise control does not work.....My guess is that he is trying to set the speed and not...


Turn on the Cruise control ON on left side of steering wheel accelerate to desired speed push set button on right side of steering wheel to turn cruise OFF press off or tap brake pedal

Jul 17, 2009 | 2004 Lincoln Town Car

2 Answers

What are the functions of Resume &Coast buttons in steering wheel


If set at a specific speed and you have to slow down by hitting the brakes, The brakes turn off the cruise control. Pressing resume automatically turns the cruise control back on and accelerates to the previous speed setting. You can also use it to accelerate and by releasing it the new speed will be set.

Jun 18, 2009 | 1996 Mercury Grand Marquis

1 Answer

The cruise control off and on switch


the cruise control switch comes out of the steering wheel. you can use a small flat head screw driver to unwedge it from is hole in the steering wheel. there will be a wire attached to the back, lift the clip holding it the wire to the switch. installation is the reverse.

Mar 21, 2009 | 2000 Buick LeSabre

1 Answer

How to replace high low dimmer switch for head lights on 2004


This will involve removal of your steering wheel and a couple of special tools, a steering wheel puller and a steering wheel lock ring compressor. If you have these are can rig your on, remove ground and wait ten minutes so the airbag system capacitor has time to discharge. Remove drivers air bag and detach wiring, remove steering wheel nut and notice align marks on wheel and steering wheel shaft and remember them. Remove the steering lockring retainer after compressing spring. from there you should remove Blinker stick, by turning shaft to line up to slot on hole and pull out, Remove clock spring and then switch, reverse to install. Hope this helps you some you can get complete instructions at www.alldatadiy.com, Hope this helps you and Merry Christmas!

Dec 23, 2008 | 2004 Buick LeSabre

2 Answers

2004 ford sport trac - cruise control no longer works


This problem is most times caused by an open circuit in the rotating contact under the steering wheel, this part is called the clock-spring contact, it supplies a connection to the airbag and steering wheel controls like the cruise, horn and radio controls. I would check the fuse as well to cover the bases, it is fuse #9 in the passenger compartment fuse box, it is a 7.5 AMP

Oct 21, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
2004 Buick LeSabre Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...