Question about 1996 Dodge Ram

2 Answers

1996 dodge ram 1500 p0505 code.whats that mean?

Posted by on

  • racinmom33 Feb 01, 2009

    I can not get my '96 Ram to crank. It turns over, there is power and fuel. The code is P0505 (idel control system malfunction). Can this keep the engine from starting at all until the part is replaced?

  • Anonymous Feb 08, 2009

    my 96 dodge 1500 will turn over but not fire and run. i just replaced the tranny and it was fine i got maybe 100 feet out the drive and it stalled.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Yes it can

Posted on Apr 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 114 Answers

Hi there P0505 code is an idle control system malfunction.

Posted on Jan 24, 2009

1 Suggested Answer

  • 6 Answers

SOURCE: 1996 dodge ram 1500....p0505

p0505 is a code for your IAC (idle air control valve) located right below the TPS (throttle positioning sensor). Beware it is not necessarily the sensor. If you use a test light on the connection coming to it while the vehicle is running and rev the motor each terminal (probably four) should flash. In this case it is most likely your sensor. If not it is in the wiring or your pcm.

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a P0505 error on my 2001 Dodge Ram 1500 5.9 what does this mean and how can I repair it


Idle Air control valve is sticking. I had this on my 5.2 Dodge engine.

You can remove the IAC assembly from the back of the thottle body and clean the metal surface. Do not turn or push on the plunger. Deposits cause it to stick. You can also replace it pretty cheaply but I find cleaning it works well.
Here is a picture of the location of the IAC

https://w05.dealerconnect.chrysler.com/service/mds2002/serviceInfo/en_US/80a61223.gif

Aug 03, 2015 | Dodge Cars & Trucks

1 Answer

2000 dodge ram TCS been replaced still get code p0505


Code 505 is for a problem with the idle air control valve.
It could be the valve, or a dirty throttle body, or a problem in the harness.
If you replaced the IAC and the throttle body is clean, and the code remains, you probably need to open the harness and check the wires.

Aug 18, 2012 | 2000 Dodge Ram 1500 Truck

1 Answer

What kind of motor oil do i use for a 1996 dodge ram 1500 4x4


according to my Dodge manuals...
10W-30 for gasoline engines
15W-40 for Diesel engines

May 14, 2010 | 1996 Dodge Ram 1500 Club Cab

2 Answers

Change the iac on a dodge ram b3500 van and still have the p0505


the idle air control is on the back of the throttle body. it has a plug going to it and is held to the throttle body with 2 screws

Oct 08, 2009 | 2000 Dodge Ram 3500

1 Answer

1996 dodge ram 1500....p0505


p0505 is a code for your IAC (idle air control valve) located right below the TPS (throttle positioning sensor). Beware it is not necessarily the sensor. If you use a test light on the connection coming to it while the vehicle is running and rev the motor each terminal (probably four) should flash. In this case it is most likely your sensor. If not it is in the wiring or your pcm.

Feb 24, 2009 | 1996 Dodge Ram

2 Answers

2001 dodge ram 1500 fault code 1687


Heryou go its a pretty lengthy diagnostic procedure it appears there is a power problem with the instrument cluster here is the code meaning hope it helps have a good dayDB0b0195e.gif

Feb 19, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Need firing order on a 1996 dodge ram v8


The order should be stamped on your intake manifold right under the air cleaner.
My '97 1500, 5.2, 318 firing order is 1-8-4-3-6-5-7-2

Hope this helps

Sep 17, 2008 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...