Question about 2001 Ford Windstar

1 Answer

Heater blows cold air

2001 ford focus se, fan works but blows only cold air. Have flushed the system, replaced all fluids, replaced thermostat. Daughter is freezing! help!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 83 Answers

Maybe the heater matrix could be at fault, thats the bit that controls the temperature in the car.

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Ford Focus a/c cleaned & recharged, why is there no cold air?


Could be gas has leaked out causing low pressure and no cold air!

Dec 28, 2015 | 2008 Ford Focus SE Sedan

1 Answer

Heater will not blow hot air. it blows cold air and fan blows. new thermostat and full radiator


The heater core is possibly blocked or the temperature adjuster is not working.

First check the controls to be certain that the temperature aduster is working and the flaps/doors that direct the flow of hot air are working.

If they are..........

Check heater hose temp. If one is hot and one is cold, you are not getting flow through the heater core.

Bleed it to remove an air blockage.
If that does not work, flush the system.
If that does not work, replace the heater core.

Karl at topgunwon.com

Feb 18, 2010 | 2002 Ford Explorer

2 Answers

Heat in 2001 ford focus wagon


if all else fails, change thermostat, and bleed are from system if needbe.

Feb 15, 2010 | 2001 Ford Focus

1 Answer

2001 ford focus heater blows cold air intermittently


CHECK COOLANT MAKE SURE ITS NOT LOW.IF COOLANT GOOD THERMOSTAT BAD.

Jan 29, 2010 | 2001 Ford Focus

2 Answers

Why is my heater on me escort 55 van only blow out cold air warm does not work


THE HEATER CONTROL VALVE MAY BE BAD OR A VACCUM HOSE OFF OR LEAKING SOMEWHERE

Dec 04, 2009 | 2001 Ford Escort ZX2

1 Answer

No heat air is blowing cold


First you have to identify what causes the problem.
To do this you have to:
1) When engine is cold check the level of coolant. If it is low fill it up.
2) Start engine and check if engine reaches regular temperature. If your engine is not heated enough it means your thermostat does not work properly and should be replaced.
3) If engine temperature is normal, then check the temperature of pipes that go to/from heater core. These pipes are located up the fire wall (easier access is from the passenger side). If pipe/pipes are cold (even engine is worm) it means you heater core is plugged and should be flushed. Keep in mind, flushing the whole cooling system is different from flushing heater core.
4) If pipe/pipes are hot/warm, turn off the fan, switch controller to the hot position, wait for 3-4 minutes and turn on the fan. Note if the cold air blows first or warm air blows first but it cools down in 5-10 seconds. If the air blows cold than it is most probably the problem with blend door or blend door actuator.
5) If air blows warm first and then cools down, then while running engine and remaining the transmission in PARKING position, press on the gas pedal until your engine reaches 3,000 RPM. Check if your heater blows warm/hot air. If it does, then your water pump does not work properly and should be replaced. If the air still cold, I would suggest to flush the heater core.

Oct 22, 2009 | 1998 Ford Taurus

1 Answer

Heater not working


First you have to identify what causes the problem.
To do this you have to:
1) When engine is cold check the level of coolant. If it is low fill it up.
2) Start engine and check if engine reaches regular temperature. If your engine is not heated enough it means your thermostat does not work properly and should be replaced.
3) If engine temperature is normal, then check the temperature of pipes that go to/from heater core. These pipes are located up the fire wall (easier access is from the passenger side). If pipe/pipes are cold (even engine is warm) it means you heater core is plugged and should be flushed. Keep in mind, flushing the whole cooling system is different from flushing heater core.
4) If pipe/pipes are hot/warm, turn off the fan, switch controller to the hot position, wait for 3-4 minutes and turn on the fan. Note if the cold air blows first or warm air blows first but it cools down in 5-10 seconds. If the air blows cold than it is most probably the problem with blend door or blend door actuator.
5) If air blows warm first and then cools down, then while running engine and remaining the transmission in PARKING position, press on the gas pedal until your engine reaches 3,000 RPM. Check if your heater blows warm/hot air. If it does, then your water pump does not work properly and should be replaced. If the air still cold, I would suggest flushing the heater core.

Oct 17, 2009 | 1998 Ford Taurus

2 Answers

Heater blows cold air, replaced thermostat &


try to back flush the heater core. and if that dont work check the blend door it see if it is working.

Oct 15, 2009 | 2002 Mitsubishi Galant

1 Answer

Heater


Have the cooling system flushed or remove the hoses from the firewall(when cool) and blow out heater core with compressed air-clogged heater core..

Jan 14, 2009 | 1999 Ford Taurus

Not finding what you are looking for?
2001 Ford Windstar Logo

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...