Question about 2002 Chevrolet Tahoe

Open Question

2002 Chevrolet Tahoe ABS light and Brake light on at same time

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 165 Answers

SOURCE: 2001 Chevrolet Silverado

Bad sensor in one wheel, they are part of the wheel bearing. Could also be a bad abs computer module, either way, not cheap.

Posted on Jun 06, 2008

  • 1 Answer

SOURCE: 2001 Chevy Tahoe with ABS & Brake light on.

I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.

Posted on Nov 24, 2008

suterman
  • 158 Answers

SOURCE: 2002 chevrolet avalanche abs light on

Hello, I see you are having abs problems. The electronic brake control module has shorted out internally keeping the anti lock brake motor running. You will want to take your vehicle to a certified dealer for this repair, because this module may or may not have to be programmed to your specific model. Please rate this answer, Thank you

Posted on Feb 28, 2009

  • 12 Answers

SOURCE: 2002 Suburban ABS System Brake Light

I have had this same problem on two difference vehicles both of which are suburbans.

The solution is simple.
Remove the engine cover.
Locate a small ground wire that is bolted to the top rear of the engine block on the passenger side.
Remove the bolt, clean surfaces and replace.

This should solve your problem.

I know it seems too easy but it works.

Posted on Mar 02, 2009

lesabre1972
  • 474 Answers

SOURCE: tahoe abs and brake light intermittently stay on

When you start to loose your abs sensors(more than one)the brake light will come on.with one sensor going the abs light will come on.I would have your front wheel bearings check seen as how that is were the sensors are.If a weeering sound happens while driving and increases and decreases with with speed I would definatly suspect wheel bearings.

Posted on Mar 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Tahoe abs relay location


images for 2002 Tahoe abs relay location

Chevy ABS and Brake Dash Light fix - YouTube

? 24:15
https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...

How I fixed a Chevy with an Abs and Brake light on - YouTube

images for 2002 tahoe wiring



Dec 09, 2015 | Cars & Trucks

1 Answer

ABS and brake light come on


Had the same thing happen on my 02 S10. Had to replace the module. I got one from the junkyard. There are also places you can send it in for rebuild. If you want to DIY, maybe try googling for videos on it. Youtube probably has some. No idea if they work or not

May 20, 2017 | 2002 Chevrolet Tahoe

1 Answer

Abs / brake light warning lights are both on. brakes sometimes squeel and other times grinds


the ABS light comes on because there has been a fault detected in the ABS system. If you notice the "grind" when making slow stops than you have an issue known as overactive ABS.

Your best bet is to have the ABS system scanned for trouble codes. Your local parts store may be able to do this for free otherwise you will need an ABS specific code reader, a high end multifunction scan tool, or bring it in to a shop to have an ABS diagnosis preformed.

Once you know what code(s) are present you will have a much better idea of where to start looking to fix the problem.

Post the codes here and I'll be happy to help you out further.

Sep 30, 2011 | 2002 Chevrolet Tahoe

2 Answers

Changed rear pads. Brake indicator on dash is still blinking and chiming. How do you reset


Is it the "brake"repair light blinking & chiming?? Or is it the "ABS" brake light blinking/chiming. Brake light should be red, ABS amber

Sep 05, 2011 | 2001 Chevrolet Tahoe

1 Answer

Abs and brake light stays on on my 2002 chevy tahoe after raplaceing the abs pump.will these go off automaticly?


Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!

Aug 31, 2011 | Chevrolet Tahoe Cars & Trucks

2 Answers

Put new abs sensors in and brake light and abs light still on


Have the ECU scanned for codes. Then check out the circuit it specificies and do the repair accordingly.
Once you got the codes that are giving you the lite let me know what it is.

Apr 09, 2010 | 2002 Chevrolet Tahoe

1 Answer

Abs light stays on


Need to hook it up the an ABS scanner to get a clue to what's going on here. most likely it will be a deffective wheel speed sensor. does the abs come on the first few times you apply the brake?

Jun 25, 2009 | 2002 Chevrolet Tahoe

1 Answer

Tahoe abs and brake light intermittently stay on


When you start to loose your abs sensors(more than one)the brake light will come on.with one sensor going the abs light will come on.I would have your front wheel bearings check seen as how that is were the sensors are.If a weeering sound happens while driving and increases and decreases with with speed I would definatly suspect wheel bearings.

Mar 29, 2009 | 2001 Chevrolet Tahoe

1 Answer

2002 Dodge Ram 2500 4x4 Brake & ABS lights stay on


I would still be suspect of the ABS module. Had the same thing happen on an 01 Tahoe.

Search the web for an ABS repair facility located in Russia, IA. They repair the module for $150.00 and give a 5 year warranty, which you can't get from the factory.
And, their website has troubleshooting guides to help you determine if for certain the module is bad or has a probelm.

You can remove the module and continue to drive the vehicle. Their turn around is as they state, and once I had them make the repiars, my Tahoe has been up and running great!

Jan 25, 2009 | 2007 Mazda B4000

Not finding what you are looking for?
2002 Chevrolet Tahoe Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...