Question about 2004 Toyota Camry

Open Question

Seat belt is extended and hung up. I can't get it to retract.

Stuck all the way extended with a fold in the slot.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 99 Toyota Camry one of the rear seat belts won't retract

You have to actually unbolt the belt holder behind the seat. Then from there you can check to see if the spring still works. You'll probably have to take the cap off it, wind the spring-load, then put the cap back on. If you can get to it, it's not too difficult. I recommend another pair of hands to help hold if they're available. You'll also want to make sure you've rolled the belt up as much as possible before before you coil the spring-load.

Posted on May 14, 2009

  • 1201 Answers

SOURCE: drivers seat belt will not retract, it is fully

The retractor is probably jammed or broken, try tapping it with a hammer, if that doesn't work, replace the retractor.

Posted on Nov 14, 2009

  • 88 Answers

SOURCE: My 2004 front seat belt

If you can't **** it to get it to retract it needs to be replaced,because of safety you can't repair them.

Posted on Dec 12, 2010

  • 3247 Answers

SOURCE: How do you repair a seat belt that is fully

I would consider replacing it as the tensioning mechanism may have become affected. This is a key component which makes the seat belt work in the situation that it is supposed to work.

The cost is around $150.

Posted on Mar 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grand cherokee rear middle seat safety belt samt retract,stuck


If you can access the seat belt retract look for debris within it or if the belt got folded part way in other wise the pendulum in the mechanism may be worn or damaged

May 06, 2014 | Cars & Trucks

1 Answer

2000 Focus Seat Belt Retractor - Pleaes Help


I had the same issue with the rear seat belt. what my solution was taking the plastic cover off the top side that pulls the seat belt back in and notice that on these cars, they actually fold the seat belt at the very end to prevent tearing. therefore the seat belt was folded inside the re-tractor and got stuck. what i did for a solution was twisted the seat belt unfolding it by grabbing the other end behind the re-tractor and now it works. Try not to fully extend it next time...... if that doesn't work go to a junk yard 12 bucks replace the whole seat belt.

Apr 29, 2012 | 2000 Ford Focus

1 Answer

Why won't the driver's side seat belt in my 2012


possibly there is something stuck in the belt not letting it retract

Apr 15, 2012 | 2012 Scion xB Base Wagon 2.4L 4-cyl....

1 Answer

C320 rear seat belt stuck


Unfortunetly the only repair for that issue is to replace the complete seat belt mechanism. Basically the internal winding mechanism has gone out and will not retract the seat belt.

Feb 16, 2012 | 2005 Mercedes-Benz Cl-Class

1 Answer

How do you repair a seat belt that is fully extended and folded and won't retract?


I would consider replacing it as the tensioning mechanism may have become affected. This is a key component which makes the seat belt work in the situation that it is supposed to work.

The cost is around $150.

Mar 21, 2011 | 2004 Toyota Camry

1 Answer

How to fix a stuck seat belt VW GTI 2009


I just solved the problem for a stuck rear center seat belt in my 2002 Jetta.

Flip the base seat cushion forward against the front seat backs. Trace down along the belt to its tether point on the floor. The belt is sewn around a steel loop. The loop is anchored to a black steel hook. A thin silvery retainer plate is spring tensioned on top of the loop to prevent it from sliding off of the hook when the seat back is folded.

Therefore, you need to press the silvery retainer plate away from the hook (push up) to allow the loop to be slid from the hook. The belt was tight with the seat back in the upright position, so it was necessary to fold the seat back forward to create slack in the belt. Now push the belt loop towards the trunk and slide it off of the end of the hook (only possible with the retainer plate pushed up out of the way).

Now with total release of tension on the system via the bottom end of the seat belt being untethered and with the seat back returned to the upright position, normal extension and retraction of the belt will be reestablished. Next, simply extend the seat belt and slide the loop back into place over the floor hook. It snaps past the silvery retainer plate without all the effort required to hold the plate up during removal of the loop during disassembly.

Check again, the seat belt should be extending and retracting properly. Now just put the seat cushion back into regular position and you will be able to safely buckle up three people across the back seat.

It took about as long to do this repair as it has taken to post this answer to the problem. Note, the seat belt safety mechanism only allows normal extension and retraction of the belt when the seat back is upright.

Nov 29, 2009 | Volkswagen GTI Cars & Trucks

1 Answer

Fix a stuck back seat seat belt 2006 mitsubishi lancser


Most often the cause for the rear belts getting stuck is not an actual bad belt mechanism, but the belt simply getting folded over and retracted that way.

Try pulling the belt out as far as you can and inspect for the belt being folded. If this is the case, slowly work it back and forth trying to unfold it. It will take a while sometimes.

Aug 30, 2009 | 2006 Mitsubishi Lancer

2 Answers

2005 Jeep Grand Cherokee LTD Rear Seat belt Stuck


anyone have answer for this problem??? i have 05 grand cherokee with same issue.

Aug 10, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Seat belt will not retract. how do i fix it?


The mechanism that allows it to retract is broken. Replace the seat belt.

Jul 15, 2009 | 2004 Dodge Grand Caravan

1 Answer

I have a 2001 Toyota Solara convertible. The seat belt is twisted and all the way out. I cannot get it to retract and can't figure out how to get the side panel off that covers it so I can work on it. Can...


Happens all the time on ours. You need to take two flat blade screwdrivers and work out the fold in the
seal belt at the top and push the belt back into the slot and all will be well. It takes a few minutes of
working with it and perhaps a few choice words but
if you will keep at it and undo the fold in the belt, it will go back in. To avoid this in the future try to get in the habit of holding the buckle straight out in front of you as the belt retracts when you unfasten your seatbelt.

Jul 18, 2008 | Toyota Camry Solara Cars & Trucks

Not finding what you are looking for?
2004 Toyota Camry Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...