Question about 2001 BMW 325

1 Answer

I replace the window regulator and I put back the motor but the window go up but not down

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

One touch doesn't work? Maybe initializing the window motor again will help?

Posted on Sep 16, 2013


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 05 bmw 325i rear window

The windowswitchs are console mounted and likely to get some soda,coffee,then get sticky trapping dirt,the switch is a real culprit on strange events involving only one part of the system.

Posted on Aug 26, 2011

  • 3301 Answers

SOURCE: 2001 bmw x5,passanger window goes down but not

check the drivers side switches for one thats shorted out.

Posted on Sep 09, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The drivers side window fell into the door of 96 rendezvous. How do i put it back on track?

The door trim is held on with a combination of screws and push clips Once you have the trim off you will probably find that the window motor regulator is defective. I would recommend replacing the regulator and motor as an assembly.

Are you sure of the year? Didn't think that they made a 1996 Buck rendezvous


Feb 23, 2015 | Cars & Trucks

1 Answer

Rear window go down but willnot go back up motor is working cable working in up and down position takes the window down willnot take the window up

it might be the switch but chances are the motor is shorting inside when u are trying to put window up . so you will probably have to replace the motor/regulator assy

Sep 17, 2013 | 2000 Pontiac Grand Am GT

1 Answer

Po wer window was stuck in the down position. Pulled off door panel and plug had power to the motor for up and down. The GM dealer was out of motors so I went to the local salvage yard. Put used...

well if you have power for up and down at the plug then it isnt a relay or fuse issue or you would have no power, did you just replace the motor only? it might be the regulator also, if it went down and wouldnt go back up then thats probably the issue a failed window regulator and thats the assembly that attaches the window to the motor and allows the motor to move the window

Sep 13, 2011 | 2002 Pontiac Montana

1 Answer

I have a 1986 Cadillac Fleetwood with two front window motors that have stopped working, and a rear passenger side window that will only go down. I am trying to replace the driver window now and have...

I had an 86 Deville

You have to drill out the rivets
-- to remove the window regulator & motor assy

If the motor is bad (test it-put battery
12v to it) then you drill out the smaller
rivets to remove the motor & keep the
window regulator if good.

If the regulator is bad, remove the good motor
& put it in the new regulator

The regulator can be bolted back in as you
will not have a big size pop rivet tool for that,

Before you remove the rivets, check the height of the
window glass above the door,when window is down
You can set it just above the molding per build or down
even by adjusting how you bolt the regulator in

The regulators wear out & cause a sloppy window movement
& the plastic on top can not be fixed

nor can you afford one.

Jun 23, 2011 | Cadillac Fleetwood Cars & Trucks

1 Answer

My passenger window is stuck up and my 2 back windows fall down and wont roll up

The regulators need replaced in the back ones the front one could be a window motor or a bad switch. Unplug the window motors and hook them up directly to a battery supply of 12 volt power and see if they go up and down. If the motor runs and the track doesnt the cable is broken. If the front window motor doesnt move replace the regulator and motor assembly

Dec 10, 2010 | 1993 Nissan Maxima

1 Answer

I have a 1999 pontiac grand prix. I put the window down today and it stopped halfway. I tried putting it back up but it would not move. I could hear the motor running both up and down but the window...

The cables on the window regulator broke or derailed, either way you need to replace the regulator to fix it. The regulator is the part that moves the window up and down.

Oct 20, 2010 | 1999 Pontiac Grand Prix

1 Answer

Replaced passenger side door glass. When you use

What you need to do to initialize the window is remove the window motor from the regulator. Plug it into the car by itself, then press up on the switch until it turns four times. Then hold the switch down for four turns, then put motor back into the regulator, and assemble back into the door. to make sure the motor spins correctly four times I make a tooth on the gear with a marker.

Oct 13, 2009 | 2000 Lexus RX 300

1 Answer

How to change window motor gear on 91 f-150

To remove the window motor on this truck remove the door panel to access the window regulator and motor assembly. The regulator might be riveted in so you will have to knock out the rivets to remove it and replace them with bolts and nuts. Once you remove the rivets lower the regulator and window down to slide regulator out of the channel on the bottom of the window once removed from window push window back up and tape in position to pull regulator and motor out unbolt motor of regulator being careful not to let tension spring on regulator to release real fast it will mess it up. Replace motor and reinstall regulator assembly back in the door on the window and bolt into place. Put door back together.

Sep 13, 2009 | 1991 Ford F150

3 Answers

The power window does not work. There is a cable

you buy the whole window regulator with motor and it bolts in 5 screws and the motor has 1 plug in harness just hold the window in place once you take out the reg it may fall ? a wedge peice of wood works well

Aug 26, 2009 | 2001 Buick Century

1 Answer

Replacing 99 Accord window regulator

Pull off door panel speaker and switches. lower the window to where you see the two or four 10millimeter that connect scissor mechanism to the window. Prop window all the way up and put a door stopper to prevent the window from falling down. Unbolt window motor, unplug window motor, and unbolt eveything else in the door. Pull it all down and out through the bottom largest whole, lay flat on ground the entire indoor mechanism, out where you can see it on the floor. Take a pic with camera, and proceed to swapping regulator, intallation is same as removal. Good Luck

Dec 28, 2008 | 2000 Honda Accord

Not finding what you are looking for?
2001 BMW 325 Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides